{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702P0AF4100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702P0AF4100","canonicalUrl":"https://aoctrl.com/schneider/SH30702P0AF4100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702P0AF4100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30702P0AF4100 SH3 servo motor with holding brake, three-phase, 1130 W nominal output power at 400/480 V, 3 N.m holding torque, IP65, absolute single-turn Hiperface DSL encoder, smooth shaft, 70 mm flange.","salesMarkdown":"## What the ratings mean on the line The SH30702P0AF4100: This is a 70 mm flange servo motor from the SH3 family with a holding brake that locks the shaft at 3 N.m when power is removed — enough to hold a vertical load on a pick-and-place gantry without drifting during a power loss. The absolute single-turn Hiperface DSL encoder reports position on power-up without a homing move — saves a full minute per axis on a multi-axis machine startup, especially after a power cycle. IP65 rating on the motor body and shaft bushing means it handles washdown in food or packaging lines without needing a secondary cover — the seal is at the shaft exit, not just the housing. ## Torque and speed for the application Nominal torque is 2.1 N.m at 230 V single-phase, dropping to 1.8 N.m at 400 V or 480 V three-phase — the lower voltage limits the current loop headroom, so the motor delivers less torque from a single-phase supply. Nominal speed reaches 3000 rpm on 230 V single-phase, 6000 rpm at 400 V three-phase, and 7200 rpm at 480 V three-phase — the winding back-EMF constant is 48 V/krpm, so the speed ceiling is set by the DC bus voltage. Peak stall torque is 7.6 N.m across the 115...480 V three-phase range — this is the torque available for a short acceleration burst, not continuous duty; the continuous stall torque is 2.04 N.m.","metaTitle":"Schneider Electric SH30702P0AF4100 Servo Motor with Brake","metaDescription":"SH30702P0AF4100 Schneider Electric servo motor with holding brake, 1130 W, 3 N.m holding torque, IP65, absolute single-turn Hiperface DSL encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30702P0AF4100","Length":"8.4 in (213 mm)","Inertia":"0.072 kg.cm² of brake 0.41 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 70mm, 2 stacks, smooth Shaft, Singleturn DSL 18bit, Brake, OneMotorCable angular M23, IP65/65","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.482 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"18.6 lbf.in (2.1 N.m) 230 V single phase 15.9 lbf.in (1.8 N.m) 400 V three phase 15.9 lbf.in (1.8 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.7 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1130 W","Mounting Support":"International standard flange","Sizing reference":"SH30702P","Back emf constant":"48 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"10.65 mH","Stator resistance":"4.2 Ohm","Brake pull-in power":"7 W","Maximum current Irms":"11.8 A","Nominal output power":"610 W 230 V single phase 1130 W 400 V three phase 1130 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"quicklock rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"160 N","Output current 3s peak":"11.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"990 N 1000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.9 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,535.76","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/7a2e3d3f86e21370f9877ce0d7dfb026.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30702P0AF4100/sh3-servomotor-70mm-2-stacks-smooth-shaft-singleturn-dsl-18bit-brake-onemotorcable-angular-m23-ip65-65/"},"ai":{"faq":[{"question":"What is the holding torque of the brake on SH30702P0AF4100?","answer":"The holding brake delivers 3 N.m (26.6 lbf.in) of holding torque — sufficient to hold a vertical axis load without drifting when power is removed."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702P0AF4100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702P0AF4100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}