{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702P0BA3000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702P0BA3000","canonicalUrl":"https://aoctrl.com/schneider/SH30702P0BA3000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702P0BA3000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30702P0BA3000, 1130 W, 7200 rpm, 2.1 N·m, absolute multiturn Hiperface DSL encoder, IP65, smooth shaft, without brake.","salesMarkdown":"## Speed-torque envelope depends on supply The SH30702P0BA3000: This SH3 frame motor delivers different performance depending on the line voltage feeding the drive. On 230 V single-phase input, nominal speed is 3000 rpm with 2.1 N·m torque and 610 W output. Feed it 400 V three-phase and it spins to 6000 rpm at 1.8 N·m, 1130 W. At 480 V three-phase, maximum mechanical speed hits 7200 rpm with the same 1.8 N·m torque and 1130 W power. Peak stall torque reaches 7.6 N·m across the 115...480 V three-phase range — that's the short-term overload headroom for acceleration or overcoming friction during start-up. Continuous stall torque is 2.04 N·m at 2.9 A, so the thermal limit for sustained holding is about a quarter of the peak capability. ## Encoder and feedback — what the Hiperface DSL means Multiturn tracking means the drive knows the absolute position even after a power cycle and shaft rotation, so homing sequences are not required on restart. ## Mounting and mechanical interface The 70 mm flange (IEC standard) with 60 mm centring collar and 2.5 mm centring depth bolts directly to a matching gearbox or machine frame. Four mounting holes at 5.5 mm diameter on the flange face — M5 or #10 bolts fit. Smooth shaft, 11 mm diameter, 23 mm engagement length — no keyway, so a clamping-type coupling is required to transmit torque without slipping. Maximum radial force at the shaft is 990 N at 1000 rpm, derating with speed. Axial force limit is 160 N. These set the bearing life for belt-drive or overhung-load applications — a direct-coupled load within these limits avoids premature bearing wear. ## Environmental sealing and cooling The shaft bushing without a seal ring drops to IP54, so a shaft seal kit should be added if the motor is mounted with the shaft pointing up into a wet zone. ## Electrical parameters for drive tuning Stator resistance is 4.2 Ω and inductance is 21.3 mH — these feed into the drive's current-loop PI gains. The back-EMF constant is 48 V/krpm at 20 °C, and the torque constant is 0.7 N·m/A at 120 °C hot. Maximum continuous current (Irms) is 11.8 A, which sets the drive sizing floor.","metaTitle":"Schneider SH30702P0BA3000 Servo Motor, 1130 W, 7200 rpm","metaDescription":"Schneider Electric SH30702P0BA3000 SH3 servo motor, 1130 W at 400/480 V three-phase, 7200 rpm max, absolute multiturn Hiperface DSL encoder, IP65, smooth shaft.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"7.4 in (187 mm)","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn Hiperface DSL","Shaft length":"0.9 in (23 mm)","Holding brake":"Without","Nominal speed":"3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.410 kg.cm²","Nominal torque":"18.6 lbf.in (2.1 N.m) 230 V single phase 15.9 lbf.in (1.8 N.m) 400 V three phase 15.9 lbf.in (1.8 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.7 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1130 W","Mounting Support":"International standard flange","Sizing reference":"SH30702P","Back emf constant":"48 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"21.3 mH","Stator resistance":"4.2 Ohm","Maximum current Irms":"11.8 A","Nominal output power":"610 W 230 V single phase 1130 W 400 V three phase 1130 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"160 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"990 N 1000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.9 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn x 4096 turns","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/f0c2aab56172ced9d3ccaa47f40a6aa8.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30702P0BA3000/sh3-servomotor-70mm-2-stacks-smooth-shaft-multiturn-dsl-18bit-no-brake-onemotorcable-straight-m23-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702P0BA3000/alternatives.json"},"ai":{"faq":[{"question":"What encoder type does SH30702P0BA3000 use?","answer":"It uses an absolute multiturn Hiperface DSL encoder. This digital two-wire interface carries position and commutation data on the same cable as the power, and multiturn tracking preserves absolute position through power cycles."},{"question":"Does SH30702P0BA3000 include a holding brake?","answer":"No, this variant is specified without a holding brake. The application must provide external braking — either a mechanical brake on the load side or dynamic braking through the servo drive."},{"question":"What is the IP rating of SH30702P0BA3000?","answer":"The motor body is rated IP65 per IEC 60034-5, suitable for washdown environments. The shaft bushing without a seal ring is IP54, so a shaft seal kit is recommended if the motor is mounted shaft-up in wet conditions."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702P0BA3000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702P0BA3000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}