{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702P12A1000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702P12A1000","canonicalUrl":"https://aoctrl.com/schneider/SH30702P12A1000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702P12A1000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor, SH30702P12A1000, three-phase, 1130 W continuous power, 6000 rpm at 400 V, absolute multiturn SinCos Hiperface encoder, IP54/IP65, without brake.","salesMarkdown":"## What speed and torque can this motor deliver across supply voltages? The SH30702P12A1000 is a three-phase servo motor that delivers nominal speeds ranging from 1500 rpm on 115 V single-phase up to 7200 rpm on 480 V three-phase, with 6000 rpm at 400 V three-phase being the typical rating for European mains. Nominal torque varies with supply: 19.03 lbf·in (2.15 N·m) at 115 V single-phase, dropping to 15.9 lbf·in (1.8 N·m) at 400 V and 480 V three-phase — the higher speeds trade torque for power. Continuous power is 1130 W, with peak stall torque of 67.3 lbf·in (7.6 N·m) across the 115–480 V three-phase range, giving you the headroom for acceleration transients in pick-and-place or indexing applications. ## Encoder feedback and environmental protection The motor carries an absolute multiturn SinCos Hiperface encoder, which provides position feedback without a home cycle on power-up — critical for applications where the machine must resume from a known position after a power loss. IP protection is IP54 at the shaft bushing without a shaft seal ring, and IP65 on the motor body and shaft bushing with the seal ring fitted. For washdown or dusty environments, specify the seal ring to keep the bearings and encoder clean.","metaTitle":"Schneider Electric SH30702P12A1000 Servo Motor, 1130 W","metaDescription":"Schneider Electric SH30702P12A1000 servo motor, 1130 W continuous power, 6000 rpm at 400 V three-phase. Absolute multiturn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"7.4 in (187 mm)","Inertia":"0.0 kg.cm² of brake 0.0 kg.cm² of motor","Category":"18359-PACDRIVE3 SERVO MOTORS","Key width":"0.2 in (4 mm)","Shaft end":"Parallel key","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"Without","Nominal speed":"1500 rpm 115 V single phase 3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.41 kg.cm²","Nominal torque":"19.03 lbf.in (2.15 N.m) 115 V single phase 18.6 lbf.in (2.1 N.m) 230 V single phase 15.9 lbf.in (1.8 N.m) 400 V three phase 15.9 lbf.in (1.8 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.7 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1130 W","Mounting Support":"International standard flange","Sizing reference":"SH30702P","Back emf constant":"48 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"29.65 mH","Stator resistance":"4.2 Ohm","Maximum current Irms":"11.8 A","Nominal output power":"340 W 115 V single phase 660 W 230 V single phase 1190 W 400 V three phase 1360 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"80 N","Output current 3s peak":"11.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.9 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/3fb8004becc21e19ace62352d56533f5.pdf","sourceUrl":"https://www.se.com/ca/en/product/SH30702P12A1000/sh3-servomotor-70mm-2-stacks-keyed-shaft-sincos-multiturn-128-no-brake-straight-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702P12A1000/alternatives.json"},"ai":{"faq":[{"question":"What is the nominal speed of SH30702P12A1000 at 400 V three-phase?","answer":"At 400 V three-phase the nominal speed is 6000 rpm; at 480 V three-phase it reaches 7200 rpm."},{"question":"What encoder type does this motor use?","answer":"It uses an absolute multiturn SinCos Hiperface encoder, providing position feedback without a homing cycle on power-up."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702P12A1000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702P12A1000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}