{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702P12F2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702P12F2100","canonicalUrl":"https://aoctrl.com/schneider/SH30702P12F2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702P12F2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series SH30702P12F2100 servo motor with brake, three-phase, 1130 W continuous power, 1500-7200 rpm speed range, IP65, absolute multiturn SinCos Hiperface encoder, 3 N·m holding brake, 70 mm flange.","salesMarkdown":"## Speed and torque across supply voltages The SH30702P12F2100 delivers four distinct speed-torque envelopes depending on the supply: 1500 rpm at 115 V single-phase, 3000 rpm at 230 V single-phase, 6000 rpm at 400 V three-phase, and 7200 rpm at 480 V three-phase. Nominal torque drops from 2.15 N·m at 115 V to 1.8 N·m at 400/480 V three-phase, meaning the motor is wound for higher torque at lower voltages — useful if your line runs on a mixed-voltage plant floor and you need consistent force at the tool tip. Continuous power output climbs with voltage: 340 W at 115 V single-phase, 660 W at 230 V single-phase, 1190 W at 400 V three-phase, and 1360 W at 480 V three-phase. The 1130 W continuous power figure is a nominal midpoint; actual shaft power depends on the drive bus voltage and the duty cycle. ## Brake, encoder, and mechanical interface Position feedback comes from an absolute multiturn SinCos Hiperface encoder, which retains position through power cycles — no homing routine needed on startup. The encoder type suits applications where absolute position tracking across power loss is critical, such as tool changers or rotary indexing tables. The motor mounts on an international standard flange with a 70 mm square (2.8 in) pilot and a 2.5 mm centring collar depth. The shaft is 11 mm diameter with a parallel key, 23 mm shaft length, and 4 mm key width — a common IEC metric interface that mates with standard gearboxes and couplings without adapter plates. ## Environmental protection and thermal limits Cooling is natural convection, so no external fan or coolant lines are needed, but the motor must be mounted with free air circulation around the frame to stay within the 130 °C copper hot-spot limit. Maximum radial force at the shaft is speed-dependent: 710 N at 1000 rpm, dropping to 390 N at 6000 rpm. If you are belt-driving a load, the belt tension must stay below these limits at operating speed to avoid bearing overload. Maximum axial force is 80 N — direct-couple the load rather than using a thrust load from a helical gear. ## Electrical parameters for drive matching Stator resistance is 4.2 Ω and stator inductance is 29.65 mH — these values set the electrical time constant and influence the current-loop tuning gains in the servo drive. The torque constant is 0.7 N·m/A at 120 °C copper temperature, and the back EMF constant is 48 V/krpm at 20 °C. Maximum continuous current (Irms) is 11.8 A, with a 3-second peak current also rated 11.8 A — the motor is not overload-capable beyond its continuous rating, so acceleration torque must come from the drive's peak current capability, not the motor. Peak stall torque is 7.6 N·m across the 115-480 V three-phase range, while continuous stall torque is 2.04 N·m. The 3.7:1 peak-to-continuous ratio means the motor can deliver short bursts for acceleration without thermal damage, but sustained torque at the peak level will exceed the winding temperature limit.","metaTitle":"Schneider Electric SH30702P12F2100 Servo Motor, 1130 W","metaDescription":"Schneider Electric SH30702P12F2100 SH3 servo motor with brake. 1130 W continuous power, 1500-7200 rpm speed range, IP65, absolute encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30702P12F2100","Length":"8.4 in (212.5 mm)","Inertia":"0.11 kg.cm² of brake 0.0 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (4 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 70mm, 2 stacks, keyed Shaft, SinCos Multiturn 128, Brake, angular, IP65/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"1500 rpm 115 V single phase 3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.482 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"19.03 lbf.in (2.15 N.m) 115 V single phase 18.6 lbf.in (2.1 N.m) 230 V single phase 15.9 lbf.in (1.8 N.m) 400 V three phase 15.9 lbf.in (1.8 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.7 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1130 W","Mounting Support":"International standard flange","Sizing reference":"SH30702P","Back emf constant":"48 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"29.65 mH","Stator resistance":"4.2 Ohm","Maximum current Irms":"11.8 A","Nominal output power":"340 W 115 V single phase 660 W 230 V single phase 1190 W 400 V three phase 1360 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"80 N","Output current 3s peak":"11.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.9 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/da9f05e3481a3d45f50f4604b4e37d73.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30702P12F2100/sh3-servomotor-70mm-2-stacks-keyed-shaft-sincos-multiturn-128-brake-angular-ip65-65/"},"ai":{"faq":[{"question":"What compliance documentation is available for SH30702P12F2100?","answer":"The motor carries IP65 protection conforming to IEC 60034-5. Standard Schneider Electric servo motor documentation includes CE, UKCA, and RoHS declarations for the SH3 series. UL recognition and REACH compliance are typically provided with the shipment documentation; request these at RFQ if your quality system requires them on file."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702P12F2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702P12F2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}