{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702P1AA3100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702P1AA3100","canonicalUrl":"https://aoctrl.com/schneider/SH30702P1AA3100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702P1AA3100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30702P1AA3100 SH3 servo motor, three-phase, 1130 W nominal output at 400/480 V, 3000 rpm base speed, absolute single-turn Hiperface DSL encoder, IP65, without holding brake, 70 mm flange.","salesMarkdown":"## What does the 1130 W rating actually mean for your axis? The SH30702P1AA3100 delivers 1130 W nominal output power when fed from a 400 V or 480 V three-phase supply — that's the continuous mechanical power you can count on at the shaft for a duty cycle that doesn't exceed the natural convection cooling limit. At 230 V single-phase the same motor is rated 610 W, so the supply voltage directly sets the power ceiling. Nominal torque follows the same pattern: 2.1 N·m at 230 V single-phase, 1.8 N·m at 400 V or 480 V three-phase. The torque constant is 0.7 N·m/A at 120 °C copper temperature — that's the winding hot, not cold, so the torque-per-amp figure is realistic for a motor that's been running long enough to reach thermal equilibrium. ## Encoder choice: why the absolute single-turn Hiperface DSL matters This motor ships with an absolute single-turn Hiperface DSL encoder — no homing sequence needed on power-up for applications where one electrical revolution covers the travel. The DSL (Digital Servo Link) protocol carries position data and diagnostic information over a single pair, simplifying the cable harness compared to a multi-wire EnDat or BiSS interface. Because it's single-turn, the absolute position repeats every 360 mechanical degrees. For multi-turn travel you'd need a multi-turn encoder variant or a homing routine at startup — worth checking before you wire this into a long-axis ballscrew application. ## IP65 and the no-brake reality The motor body and shaft bushing are both rated IP65 per IEC 60034-5 — that means dust-tight and protected against low-pressure water jets from any direction. Fine for washdown zones in food packaging or machine-tool coolant splash, but not for high-pressure spray (IP66) or immersion (IP67). There is no holding brake on this variant (: Without). If your vertical axis or emergency-stop sequence needs the load held at standstill without the drive holding torque, you'll need to add an external brake or spec the braked version. The shaft end is a parallel key, 11 mm diameter, 23 mm length — standard for a 70 mm flange motor this size. ## Electrical parameters for drive tuning Stator resistance is 4.2 Ω and inductance is 21.3 mH — these are the values the servo drive's autotune routine uses to calculate current-loop gains. Continuous stall current is 2.9 A; peak current (maximum Irms) is 11.8 A, so the drive's peak current capability should be sized for at least that figure to get the 7.6 N·m peak stall torque.","metaTitle":"Schneider Electric SH30702P1AA3100 Servo Motor, 1130 W","metaDescription":"Schneider Electric SH30702P1AA3100 SH3 servo motor, 1130 W nominal output at 400/480 V three-phase, 3000 rpm base speed, absolute single-turn Hiperface DSL","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"7.4 in (187 mm)","Category":"US1PC5218359","Key width":"0.2 in (4 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"0.9 in (23 mm)","Holding brake":"Without","Nominal speed":"3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.410 kg.cm²","Nominal torque":"18.6 lbf.in (2.1 N.m) 230 V single phase 15.9 lbf.in (1.8 N.m) 400 V three phase 15.9 lbf.in (1.8 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.7 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1130 W","Mounting Support":"International standard flange","Sizing reference":"SH30702P","Back emf constant":"48 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"21.3 mH","Stator resistance":"4.2 Ohm","Maximum current Irms":"11.8 A","Nominal output power":"610 W 230 V single phase 1130 W 400 V three phase 1130 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"160 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"990 N 1000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.9 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/1fa7a453c63f238ec0974675fcd79fdc.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30702P1AA3100/sh3-servomotor-70mm-2-stacks-keyed-shaft-singleturn-dsl-18bit-no-brake-onemotorcable-straight-m23-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702P1AA3100/alternatives.json"},"ai":{"faq":[{"question":"What is the maximum mechanical speed of this motor?","answer":"The maximum mechanical speed is 8000 rpm. The nominal speed at 400 V three-phase is 6000 rpm, and at 480 V three-phase it reaches 7200 rpm — the motor can overspeed above nominal if the load and drive allow, up to the 8000 rpm ceiling."},{"question":"Does this motor include a holding brake?","answer":"No — the holding brake field is marked 'Without'. For vertical-axis or safety-hold applications, an external brake or a braked motor variant is required."},{"question":"What compliance documentation is available for the SH30702P1AA3100?","answer":"The motor carries an IP65 rating conforming to IEC 60034-5. Standard Schneider Electric documentation includes the CE declaration of conformity and the product data sheet. RoHS and REACH compliance status is covered in the manufacturer's regulatory declarations for the SH3 series."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702P1AA3100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702P1AA3100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}