{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702P1AA4000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702P1AA4000","canonicalUrl":"https://aoctrl.com/schneider/SH30702P1AA4000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702P1AA4000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30702P1AA4000 SH3 servo motor, three-phase, 1130 W continuous power, 3000 rpm nominal speed, 2.1 Nm nominal torque, absolute single-turn Hiperface DSL encoder, IP65, 70 mm flange.","salesMarkdown":"## Motor ratings across supply voltages The SH30702P1AA4000 is a three-phase SH3 servo motor from Schneider Electric. Its performance depends on the supply: at 400 V three-phase it delivers 1130 W continuous power and 1.8 Nm nominal torque, while at 230 V single-phase the output drops to 610 W and 2.1 Nm. Nominal speed reaches 3000 rpm on 230 V single-phase, 6000 rpm on 400 V three-phase, and 7200 rpm on 480 V three-phase — the speed ceiling is set by the supply voltage and phase configuration. Peak stall torque is 7.6 Nm across the 115...480 V three-phase range, with continuous stall torque at 2.04 Nm. The torque constant is 0.7 Nm/A at 120 °C copper temperature. ## Encoder and feedback interface This motor carries an absolute single-turn encoder using the Hiperface DSL digital interface — a single-cable feedback protocol that carries both power and position data over the motor cable, reducing wiring complexity in the cabinet. Back EMF constant is 48 V/krpm at 20 °C, which sets the voltage-speed relationship for drive tuning and regeneration braking limits. ## Mechanical fit and mounting Flange size is 70 mm (2.8 in) with an international standard flange pattern — mounting holes are 5.5 mm diameter on a 60 mm centring collar. Shaft diameter is 11 mm with a parallel key, key width 4 mm, shaft length 23 mm. Overall length is 187 mm (7.4 in). The motor is cooled by natural convection — no external fan or forced air required, but the mounting surface must allow free airflow around the housing. Maximum radial force at the shaft is 900 N at 1000 rpm, and maximum axial force is 160 N — these limits govern the allowable belt tension or direct coupling load. ## Environmental protection and connections IP65 rated per IEC 60034-5 for the motor body, with IP54 at the shaft bushing when the shaft seal ring is omitted — suitable for washdown environments if the shaft seal is specified. Electrical connection is via a straight connector or a quicklock rotatable right-angled connector. Stator resistance is 4.2 Ohm and inductance is 10.65 mH — these values are used by the drive for current-loop tuning and thermal modelling. Maximum continuous current Irms is 11.8 A, with the same value for 3-second peak output. ## Sourcing and lifecycle status The sizing reference SH30702P anchors this motor in the SH3 family; confirm the mating drive and cable set compatibility before specifying.","metaTitle":"Schneider Electric SH30702P1AA4000 Servo Motor, 1130 W","metaDescription":"Schneider Electric SH30702P1AA4000 SH3 servo motor, 1130 W continuous power, 3000 rpm nominal speed, absolute single-turn Hiperface DSL encoder, IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30702P1AA4000","Length":"7.4 in (187 mm)","Inertia":"0.0 kg.cm² of brake 0.41 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (4 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 70mm, 2 stacks, keyed Shaft, Singleturn DSL 18bit, no Brake, OneMotorCable angular M23, IP54/65","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"0.9 in (23 mm)","Holding brake":"Without","Nominal speed":"3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.410 kg.cm²","Nominal torque":"18.6 lbf.in (2.1 N.m) 230 V single phase 15.9 lbf.in (1.8 N.m) 400 V three phase 15.9 lbf.in (1.8 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.7 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1130 W","Mounting Support":"International standard flange","Sizing reference":"SH30702P","Back emf constant":"48 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"10.65 mH","Stator resistance":"4.2 Ohm","Maximum current Irms":"11.8 A","Nominal output power":"610 W 230 V single phase 1130 W 400 V three phase 1130 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"quicklock rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"160 N","Output current 3s peak":"11.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"900 N 1000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.9 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,215.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/2f65108765b4e60b8c40790e4d3f12ac.pdf","sourceUrl":"https://www.se.com/us/en/product/SH30702P1AA4000/sh3-servomotor-70mm-2-stacks-keyed-shaft-singleturn-dsl-18bit-no-brake-onemotorcable-angular-m23-ip54-65/"},"ai":{"faq":[{"question":"What is the nominal speed of SH30702P1AA4000 at different supply voltages?","answer":"Nominal speed is 3000 rpm on 230 V single-phase, 6000 rpm on 400 V three-phase, and 7200 rpm on 480 V three-phase. The speed range depends on the supply configuration."},{"question":"What encoder type does SH30702P1AA4000 use?","answer":"It uses an absolute single-turn encoder with Hiperface DSL digital interface — a single-cable feedback protocol that combines power and data, simplifying the wiring run between drive and motor."},{"question":"What is the IP rating of SH30702P1AA4000?","answer":"The motor body is IP65 per IEC 60034-5, with IP54 at the shaft bushing when the shaft seal ring is not fitted. The IP65 rating covers the housing against dust and low-pressure water jets."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702P1AA4000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702P1AA4000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}