{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702P1AA4100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702P1AA4100","canonicalUrl":"https://aoctrl.com/schneider/SH30702P1AA4100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702P1AA4100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30702P1AA4100 SH3 servo motor, 1130 W continuous power, 3000 rpm nominal speed, 2.1 N.m nominal torque, IP65, Hiperface DSL absolute encoder, 70 mm flange.","salesMarkdown":"## Motor envelope and flange fit The SH30702P1AA4100 carries a 70 mm flange (IEC standard) with a 60 mm centring collar and 2.5 mm collar depth — this mates to the standard SH3 frame mounting pattern. Overall length is 187 mm, so it clears most close-coupled gearbox and actuator envelopes without a spacer. The shaft is 11 mm diameter with a parallel key, 23 mm engagement length, and a 4 mm keyway. This is a common metric shaft size for direct coupling to ball screws and timing-belt pulleys in the 1–2 N.m continuous torque range. ## Speed and torque across supply voltages Nominal speed is 3000 rpm on 230 V single-phase input, 6000 rpm on 400 V three-phase, and 7200 rpm on 480 V three-phase. The motor reaches its full rated speed only when the drive bus voltage matches the higher tap — a 230 V-only line limits top speed to 3000 rpm. Nominal torque is 2.1 N.m at 230 V single-phase and 1.8 N.m at both 400 V and 480 V three-phase. The continuous stall torque is 2.04 N.m across the 115–480 V three-phase range, so the motor holds its low-speed torque capability regardless of the supply tap within that window. Peak stall torque is 7.6 N.m on three-phase supply — roughly 3.7× the continuous rating — which gives headroom for acceleration transients and short-duration overloads during indexing or pick-and-place moves. ## Encoder and feedback — Hiperface DSL single-turn The motor carries an absolute single-turn Hiperface DSL encoder. This is a digital serial-link feedback protocol that runs over a single cable pair (power + data) and reports absolute position within one revolution — no homing cycle needed on power-up for rotary axes that stay within a single turn. Hiperface DSL is compatible with Schneider's Lexium 28, 32, and 62 drive families and most third-party servo drives that support the DSL protocol. The straight connector on the motor body mates to a standard DSL cable assembly. ## Environmental sealing and cooling IP65 rating per IEC 60034-5 on both the motor body and the shaft bushing — the seal at the shaft exit is the wet-end barrier, not just the housing. Cooling is by natural convection — no external fan or forced air. The continuous power rating of 1130 W assumes free air circulation around the motor body; derating applies if the motor is enclosed or mounted in a crowded cabinet without airflow. ## Electrical parameters for drive tuning Stator resistance is 4.2 Ω and inductance is 10.65 mH — these set the electrical time constant and influence the current-loop tuning gains in the servo drive. The torque constant is 0.7 N.m/A at 120 °C copper temperature, so the drive's peak current limit of 11.8 A maps to roughly 8.3 N.m theoretical peak torque before saturation. Back-EMF constant is 48 V/krpm at 20 °C — at 6000 rpm the motor generates 288 V line-to-line back-EMF, which must stay below the drive's DC bus voltage for proper current regulation at high speed. ## Sourcing and lifecycle — active production The sizing reference is SH30702P, which groups this motor with the SH3 family of 70 mm flange servo motors.","metaTitle":"Schneider Electric SH30702P1AA4100 Servo Motor, 1130 W","metaDescription":"Schneider Electric SH30702P1AA4100 SH3 servo motor, 1130 W continuous power, 3000 rpm at 230 V single-phase, IP65, Hiperface DSL encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30702P1AA4100","Length":"7.4 in (187 mm)","Inertia":"0.0 kg.cm² of brake 0.41 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (4 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 70mm, 2 stacks, keyed Shaft, Singleturn DSL 18bit, no Brake, OneMotorCable angular M23, IP65/65","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"0.9 in (23 mm)","Holding brake":"Without","Nominal speed":"3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.410 kg.cm²","Nominal torque":"18.6 lbf.in (2.1 N.m) 230 V single phase 15.9 lbf.in (1.8 N.m) 400 V three phase 15.9 lbf.in (1.8 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.7 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1130 W","Mounting Support":"International standard flange","Sizing reference":"SH30702P","Back emf constant":"48 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"10.65 mH","Stator resistance":"4.2 Ohm","Maximum current Irms":"11.8 A","Nominal output power":"610 W 230 V single phase 1130 W 400 V three phase 1130 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"quicklock rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"160 N","Output current 3s peak":"11.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"990 N 1000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.9 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,366.20","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/590d0d40fe30a2840e81202a728c7470.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30702P1AA4100/sh3-servomotor-70mm-2-stacks-keyed-shaft-singleturn-dsl-18bit-no-brake-onemotorcable-angular-m23-ip65-65/"},"ai":{"faq":[{"question":"What is the maximum radial load on the shaft?","answer":"The maximum radial force Fr is 990 N at 1000 rpm, and the maximum axial force Fa is 160 N. These limits apply at the shaft centre; higher speeds reduce the allowable radial load per the bearing L10 life curve."},{"question":"What compliance documentation does Schneider Electric provide for SH30702P1AA4100?","answer":"The motor carries IP65 per IEC 60034-5. Standard Schneider documentation includes the CE declaration of conformity and the product data sheet with electrical and mechanical drawings. RoHS and REACH compliance declarations are available on request through the supply chain."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702P1AA4100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702P1AA4100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}