{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702P1AF3000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702P1AF3000","canonicalUrl":"https://aoctrl.com/schneider/SH30702P1AF3000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702P1AF3000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30702P1AF3000 SH3 servo motor with brake, 1130 W continuous power, 3000 rpm nominal speed, 2.1 Nm nominal torque, absolute single-turn Hiperface DSL encoder, IP65, three phase.","salesMarkdown":"## What the SH30702P1AF3000 brings to a motion axis This is a 1130 W permanent-magnet synchronous servo motor from the SH3 family, with an integrated holding brake and a single-turn absolute encoder using Hiperface DSL protocol. The brake holds 3 Nm static — enough to keep a vertical axis from dropping when power is removed, without needing an external mechanical lock. The encoder is absolute single-turn Hiperface DSL, meaning it reports position on power-up without a homing cycle, as long as the axis hasn't rotated more than one full revolution since last shutdown. For multi-turn applications, the drive must handle the rollover or you need a multi-turn encoder variant. Nominal speed is 3000 rpm on 230 V single-phase supply, but jumps to 6000 rpm on 400 V three-phase and 7200 rpm on 480 V three-phase. The torque curve shifts with voltage: nominal torque is 2.1 Nm at 230 V, dropping to 1.8 Nm at 400/480 V. The peak stall torque is 7.6 Nm across the 115–480 V three-phase range. ## Mounting and mechanical fit The motor uses an international standard flange with a 70 mm flange size and a 60 mm centring collar. The shaft is 11 mm diameter with a parallel key, 23 mm shaft length, and the overall body length is 213 mm. The centring collar depth is 2.5 mm — the mating face on the gearbox or machine frame must accommodate that. IP65 on the motor body per IEC 60034-5 means it handles washdown and dust ingress, but the shaft bushing drops to IP54 if the shaft seal ring is not fitted. For food or wet environments, specify the seal ring option. Cooling is natural convection — no fan, so the continuous torque rating assumes free airflow around the motor. If it's boxed in a tight enclosure, derate the continuous torque or add forced ventilation. ## Electrical parameters and drive matching Stator resistance is 4.2 Ω and inductance is 21.3 mH — these set the electrical time constant and influence the drive's current-loop tuning. The torque constant is 0.7 Nm/A at 120°C copper temperature, and the back EMF constant is 48 V/krpm at 20°C. Maximum current Irms is 11.8 A. Maximum radial force at the shaft is 900 N at 1000 rpm; maximum axial force is 160 N. Exceed these and the bearing life drops fast — check the load on the shaft end before finalizing the coupling or pulley. ## Sourcing and lifecycle status The electrical connection uses a quicklock straight connector — a single-cable solution carrying both power and encoder feedback via Hiperface DSL. This simplifies cabling compared to separate power and feedback cables, but the connector type must match the drive's mating half.","metaTitle":"Schneider Electric SH30702P1AF3000 Servo Motor with Brake","metaDescription":"Schneider Electric SH30702P1AF3000 servo motor with brake, 1130 W continuous power, 3000 rpm nominal speed, absolute single-turn Hiperface DSL encoder, IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.4 in (213 mm)","Category":"US1PC5218359","Key width":"0.2 in (4 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.482 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"18.6 lbf.in (2.1 N.m) 230 V single phase 15.9 lbf.in (1.8 N.m) 400 V three phase 15.9 lbf.in (1.8 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.7 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1130 W","Mounting Support":"International standard flange","Sizing reference":"SH30702P","Back emf constant":"48 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"21.3 mH","Stator resistance":"4.2 Ohm","Brake pull-in power":"7 W","Maximum current Irms":"11.8 A","Nominal output power":"610 W 230 V single phase 1130 W 400 V three phase 1130 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"160 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"900 N 1000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.9 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/56393e9e0f7ea1d85998eda835010504.pdf","sourceUrl":"https://www.se.com/us/en/product/SH30702P1AF3000/sh3-omc-motor-70mm-2-st-ip65-54-keyed-sh-dsl-single-turn-str-conn-m23-brake/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702P1AF3000/alternatives.json"},"ai":{"faq":[{"question":"What encoder type does the SH30702P1AF3000 use?","answer":"It uses an absolute single-turn Hiperface DSL encoder. This provides position on power-up without a homing cycle, as long as the axis hasn't rotated more than one full turn since last shutdown."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702P1AF3000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702P1AF3000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}