{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702P1AF3100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702P1AF3100","canonicalUrl":"https://aoctrl.com/schneider/SH30702P1AF3100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702P1AF3100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30702P1AF3100 SH3 servo motor, three-phase, 1130 W continuous power, IP65, with holding brake, absolute single-turn Hiperface DSL encoder, 70 mm flange.","salesMarkdown":"## Motor specs that decide the drive match The SH30702P1AF3100 is a three-phase servo motor from the SH3 series (Lexium 32 family). Its nominal output power is 1130 W at 400 V or 480 V three-phase supply, dropping to 610 W at 230 V single-phase — so the drive's power rating must match the supply voltage you're feeding it. Nominal speed shifts with the line voltage: 3000 rpm at 230 V single-phase, 6000 rpm at 400 V three-phase, and 7200 rpm at 480 V three-phase. The nominal torque follows the same pattern — 2.1 N.m at 230 V, 1.8 N.m at 400/480 V. The peak stall torque is 7.6 N.m across the 115...480 V three-phase range, which is the short-term overload headroom for acceleration or load transients. Continuous stall torque is 2.04 N.m at 115...480 V three-phase — this is the torque the motor can deliver at zero speed indefinitely without overheating. The continuous power rating of 1130 W sets the thermal limit for sustained high-speed operation. ## Encoder, brake, and feedback — what's inside The encoder is an absolute single-turn Hiperface DSL — a digital serial-link protocol that carries position and temperature data over a single cable pair. No battery backup needed for single-turn position; the drive reads the absolute position on power-up. The holding brake is integrated, rated at 3 N.m static holding torque with a pull-in power of only 7 W. That low holding power means minimal heat bleed into the motor housing during standstill. The brake is spring-applied, power-released — it engages when the drive's brake control signal drops out, so a power loss locks the shaft. Electrical connection options include a rotatable right-angled connector and a quicklock straight connector — both are IP65-rated when mated, giving flexibility for cable exit direction in tight cabinets or moving cable tracks. ## Mounting, shaft, and mechanical limits The motor flange is 70 mm (international standard), with a centring collar diameter of 60 mm and depth of 2.5 mm. The four mounting holes are 5.5 mm diameter — standard M5 bolt pattern. Overall body length is 213 mm. The shaft is 11 mm diameter, 23 mm long, with a parallel key (key width 4 mm). The shaft end is keyed — not a smooth shaft — so the coupling or pulley must have a matching keyway. Maximum radial force is 990 N at 1000 rpm, and maximum axial force is 160 N — stay within these for bearing life, especially with belt drives or overhung loads. Cooling is natural convection — no fan or forced air required. ## Electrical parameters for drive tuning Stator resistance is 4.2 Ohm and stator inductance is 21.3 mH — these set the electrical time constant and are needed for the drive's current-loop autotuning. The torque constant is 0.7 N.m/A at 120 °C (copper hot), and the back EMF constant is 48 V/krpm at 20 °C — both critical for the drive's velocity-loop gain calibration. The motor has 3 poles (not pole pairs — the evidence states 3 motor poles, which is unusual; a 3-pole motor is a 2-pole equivalent in synchronous terms). The winding insulation class is rated for a copper temperature of 130 °C. The sizing reference SH30702P is the base model code; the full order code SH30702P1AF3100 includes the encoder, brake, and connector variant.","metaTitle":"Schneider SH30702P1AF3100 Servo Motor with Brake, 1130 W","metaDescription":"Schneider Electric SH30702P1AF3100 servo motor, 1130 W, 3-phase, IP65, with holding brake and Hiperface DSL encoder. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.4 in (213 mm)","Category":"US1PC5218359","Key width":"0.2 in (4 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.482 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"18.6 lbf.in (2.1 N.m) 230 V single phase 15.9 lbf.in (1.8 N.m) 400 V three phase 15.9 lbf.in (1.8 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.7 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1130 W","Mounting Support":"International standard flange","Sizing reference":"SH30702P","Back emf constant":"48 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"21.3 mH","Stator resistance":"4.2 Ohm","Brake pull-in power":"7 W","Maximum current Irms":"11.8 A","Nominal output power":"610 W 230 V single phase 1130 W 400 V three phase 1130 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"160 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"990 N 1000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.9 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/24b4370cd679efe9fe4f0230040802c4.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30702P1AF3100/sh3-servomotor-70mm-2-stacks-keyed-shaft-singleturn-dsl-18bit-brake-onemotorcable-straight-m23-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702P1AF3100/alternatives.json"},"ai":{"faq":[{"question":"What is SH30702P1AF3100's IP rating and what does it mean for installation?","answer":"The motor and shaft bushing are rated IP65 per IEC 60034-5. This means it's dust-tight and protected against water jets from any direction — suitable for washdown environments like food processing or packaging lines, provided the mating connector is also IP65-rated."},{"question":"What encoder type does SH30702P1AF3100 use?","answer":"It uses an absolute single-turn Hiperface DSL encoder. This is a digital serial-link protocol that provides absolute position within one revolution on power-up, with no battery backup required. The DSL (Digital Serial Link) carries position and temperature data over a single cable pair."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702P1AF3100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702P1AF3100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}