{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702P1AF4000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702P1AF4000","canonicalUrl":"https://aoctrl.com/schneider/SH30702P1AF4000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702P1AF4000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30702P1AF4000 SH3 series servo motor with holding brake, 1130 W, 2.04 N.m continuous stall torque, 7.6 N.m peak stall torque, 3000-7200 rpm, IP65, absolute single-turn Hiperface DSL encoder.","salesMarkdown":"## Sizing the SH30702P1AF4000 for the load and drive The nominal torque sits at 1.8 N.m on three-phase supplies and 2.1 N.m on single-phase, so the load torque at continuous speed must stay below these figures to avoid thermal overload. Peak stall torque reaches 7.6 N.m across the 115...480 V three-phase range — this is the short-term ceiling for acceleration and deceleration moves, not a continuous rating. The continuous stall torque is 2.04 N.m, which is the torque the motor can hold at zero speed indefinitely without overheating. Nominal speed depends on the supply voltage: 3000 rpm on 230 V single-phase, 6000 rpm on 400 V three-phase, and 7200 rpm on 480 V three-phase. The drive's bus voltage and the motor's back EMF constant of 48 V/krpm at 20 °C set the practical top speed — if the back EMF approaches the bus voltage, the current loop loses headroom and torque drops off. ## Brake, feedback, and mechanical interface An integrated holding brake delivers 3 N.m holding torque, making this motor suited for vertical-axis applications where the load must stay put when power is removed. The brake pull-in power is 7 W — the drive's brake control output must supply this to release the brake. The motor flange is 70 mm with a centring collar depth of 2.5 mm, and the shaft is 11 mm diameter with a 23 mm length and a parallel key (key width 4 mm) — these dimensions define the coupling or pulley interface and the mounting pilot register. ## Environmental protection and cooling The motor body carries IP65 protection per IEC 60034-5, meaning it is dust-tight and protected against low-pressure water jets — suitable for washdown environments. The shaft bushing without a shaft seal ring drops to IP54, so the shaft exit point is splash-proof but not jet-proof. Cooling is by natural convection — no fan or liquid circuit required, but the motor must be mounted with free air movement around the housing to dissipate the 1130 W of continuous losses. The maximum winding temperature is 130 °C (copper hot), and the drive's thermal model should protect the motor to this limit. Maximum radial force is 990 N at 1000 rpm, and maximum axial force is 160 N — these bearing load limits must be respected when using belt drives or direct couplings; radial force derates with speed. ## Electrical parameters and drive compatibility Stator resistance is 4.2 Ohm and stator inductance is 10.65 mH — these set the electrical time constant and influence the drive's current ripple and PWM frequency selection. The torque constant is 0.7 N.m/A at 120 °C, which the drive's current loop uses to map the torque command to the current reference. Maximum continuous current (Irms) is 11.8 A, and the output current 3 s peak is also 11.8 A — the drive must be sized to supply this current continuously and for short-term overloads. The electrical connection is a rotatable right-angled connector with QuickLock, simplifying cable routing in tight cabinets.","metaTitle":"Schneider Electric SH30702P1AF4000 Servo Motor with Brake","metaDescription":"Schneider Electric SH30702P1AF4000 servo motor with holding brake, 1130 W continuous power, 3 N.m holding torque, IP65, Hiperface DSL encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30702P1AF4000","Length":"8.4 in (213 mm)","Inertia":"0.072 kg.cm² of brake 0.41 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (4 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 70mm, 2 stacks, keyed Shaft, Singleturn DSL 18bit, Brake, OneMotorCable angular M23, IP54/65","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.482 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"18.6 lbf.in (2.1 N.m) 230 V single phase 15.9 lbf.in (1.8 N.m) 400 V three phase 15.9 lbf.in (1.8 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.7 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1130 W","Mounting Support":"International standard flange","Sizing reference":"SH30702P","Back emf constant":"48 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"10.65 mH","Stator resistance":"4.2 Ohm","Brake pull-in power":"7 W","Maximum current Irms":"11.8 A","Nominal output power":"610 W 230 V single phase 1130 W 400 V three phase 1130 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"quicklock rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"160 N","Output current 3s peak":"11.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"990 N 1000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.9 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,431.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/2e1a0ee04c234b9ac4a9575a681f7b95.pdf","sourceUrl":"https://www.se.com/us/en/product/SH30702P1AF4000/sh3-servomotor-70mm-2-stacks-keyed-shaft-singleturn-dsl-18bit-brake-onemotorcable-angular-m23-ip54-65/"},"ai":{"faq":[{"question":"What is the continuous power and torque of the SH30702P1AF4000?","answer":"Continuous power is 1130 W on 400/480 V three-phase and 610 W on 230 V single-phase. Continuous stall torque is 2.04 N.m, and nominal torque is 1.8 N.m on three-phase supplies."},{"question":"What encoder type does the SH30702P1AF4000 use?","answer":"It uses an absolute single-turn Hiperface DSL encoder — no homing cycle is needed on power-up, and the drive must support the Hiperface DSL protocol."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702P1AF4000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702P1AF4000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}