{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702P1BA3000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702P1BA3000","canonicalUrl":"https://aoctrl.com/schneider/SH30702P1BA3000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702P1BA3000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30702P1BA3000 SH3 servo motor, 1130 W continuous power, 6000 rpm nominal at 400 V three phase, absolute multiturn Hiperface DSL encoder, IP65, without holding brake.","salesMarkdown":"## Supply voltage and speed — three-phase performance The SH30702P1BA3000: This SH3 servo motor delivers 1130 W continuous power when fed from a 400 V or 480 V three-phase supply, with nominal speed reaching 6000 rpm at 400 V and 7200 rpm at 480 V. On 230 V single phase, output drops to 610 W and 3000 rpm — the torque constant is 0.7 N.m/A at 120 °C, so the application's supply voltage directly sets the usable speed-torque envelope. Peak stall torque hits 7.6 N.m across the 115...480 V three-phase range, with continuous stall torque at 2.04 N.m and continuous stall current at 2.9 A — the motor is sized for the duty cycle, not just the peak number. ## Encoder feedback — absolute multiturn Hiperface DSL This matters when the motor is mounted on a gantry or rotary table where cable management is tight. No holding brake on this variant — the load must be held by the drive's holding torque or an external brake. The straight quicklock connector mates directly to the drive cable, no field wiring of the feedback pair. ## Mechanical fit — flange, shaft, and sealing International standard flange, 70 mm square, with a 60 mm centring collar and 2.5 mm depth — this is the common IEC frame size for this power class. The shaft is 11 mm diameter with a parallel key, 23 mm length, and a 4 mm key width. Maximum radial force at 1000 rpm is 990 N; maximum axial force is 160 N — overhung loads need to stay within these limits to avoid bearing damage. IP65 rating on the motor body holds for washdown environments; the shaft bushing drops to IP54 if the shaft seal ring is omitted — a consideration for food or wet processing lines where the seal ring is standard.","metaTitle":"Schneider Electric SH30702P1BA3000 Servo Motor, 1130 W","metaDescription":"Schneider Electric SH30702P1BA3000 SH3 servo motor, 1130 W continuous power, 6000 rpm at 400 V three phase, absolute multiturn Hiperface DSL encoder, IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"7.4 in (187 mm)","Category":"US1PC5218359","Key width":"0.2 in (4 mm)","Shaft end":"Parallel key","Encoder type":"Absolute multiturn Hiperface DSL","Shaft length":"0.9 in (23 mm)","Holding brake":"Without","Nominal speed":"3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.410 kg.cm²","Nominal torque":"18.6 lbf.in (2.1 N.m) 230 V single phase 15.9 lbf.in (1.8 N.m) 400 V three phase 15.9 lbf.in (1.8 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.7 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1130 W","Mounting Support":"International standard flange","Sizing reference":"SH30702P","Back emf constant":"48 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"21.3 mH","Stator resistance":"4.2 Ohm","Maximum current Irms":"11.8 A","Nominal output power":"610 W 230 V single phase 1130 W 400 V three phase 1130 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"160 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"990 N 1000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.9 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn x 4096 turns","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/f9528730701ee5910473cf4619814246.pdf","sourceUrl":"https://www.se.com/us/en/product/SH30702P1BA3000/sh3-omc-motor-70mm-2-st-ip65-54-keyed-sh-dsl-multi-turn-str-conn-m23/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702P1BA3000/alternatives.json"},"ai":{"faq":[{"question":"What supply voltage and phase does SH30702P1BA3000 need?","answer":"Three-phase supply is required for full performance. At 400 V three phase the motor delivers 1130 W and 6000 rpm; at 480 V three phase it reaches 7200 rpm. It can also run on 230 V single phase but output drops to 610 W and 3000 rpm."},{"question":"What encoder type does this servo motor use?","answer":"It uses an absolute multiturn Hiperface DSL encoder — position and commutation data are transmitted over the power cable, eliminating a separate feedback cable."},{"question":"Does SH30702P1BA3000 include a holding brake?","answer":"No — this variant is specified without a holding brake. The load must be held by the drive's holding torque or an external brake mechanism."},{"question":"What is the IP rating of this motor?","answer":"The motor body is rated IP65 per IEC 60034-5. The shaft bushing without the shaft seal ring drops to IP54, so the seal ring should be fitted for washdown environments."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702P1BA3000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702P1BA3000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}