{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30703M01A1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30703M01A1200","canonicalUrl":"https://aoctrl.com/schneider/SH30703M01A1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH30703M01A1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30703M01A1200, three-phase, 830 W continuous power, 3000 rpm nominal speed at 400 V, absolute single-turn SinCos Hiperface encoder, IP65, smooth shaft, 70 mm flange.","salesMarkdown":"## Motor ratings across supply voltages The SH30703M01A1200 delivers 3000 rpm nominal speed at 400 V three-phase supply, and 3600 rpm at 480 V three-phase — the speed scales linearly with input voltage above the motor's base rating. On single-phase 115 V it runs 750 rpm; on 230 V single-phase it reaches 1500 rpm. Nominal torque holds at 23.28 lbf.in (2.63 N.m) on both 400 V and 480 V three-phase supplies, but drops to 26.99 lbf.in (3.05 N.m) on 115 V single-phase and 26.11 lbf.in (2.95 N.m) on 230 V single-phase — the torque curve is flattest on three-phase where the motor is designed to operate. Continuous power output is 830 W, with nominal output power varying by supply: 240 W on 115 V single-phase, 460 W on 230 V single-phase, 880 W on 400 V three-phase, and 1030 W on 480 V three-phase. The 830 W figure is the motor's thermal continuous rating; actual shaft power depends on the drive's voltage and current limit. ## Feedback and environmental sealing The encoder is an absolute single-turn SinCos Hiperface type — it reports position at power-up without a homing sequence, which simplifies commissioning on multi-axis machines where the controller expects absolute feedback on each axis. IP65 rating on the motor body and shaft bushing per IEC 60034-5, with IP67 on the housing — the motor withstands washdown spray and condensation common in food-and-beverage or washdown packaging lines. The shaft bushing seal is the wet-end barrier; the housing seal is secondary. ## Mounting and shaft interface Motor flange size is 70 mm (2.8 in) with a centring collar diameter of 60 mm (2.4 in) and a centring collar depth of 2.5 mm (0.10 in) — this is the standard IEC 72-1 flange pattern for frame size 70, so it bolts directly to matching gearboxes and mounting brackets without adaptor plates. Smooth shaft, 14 mm diameter, 30 mm shaft length, with a 5 mm keyway — no key fitted as standard, so the coupling or pulley must be clamped or keyed separately. The smooth shaft allows the end user to fit the correct key for their hub. Electrical connection options include a rotatable right-angled connector and a straight connector — the right-angled version saves radial space in tight cable trays; the straight connector suits axial cable exit. Both are field-rotatable on the motor housing.","metaTitle":"Schneider SH30703M01A1200 Servo Motor, 3-Phase, 3000 rpm","metaDescription":"Schneider Electric SH30703M01A1200 SH3 servo motor, 3-phase, 830 W continuous power, 3000 rpm at 400 V, absolute single-turn SinCos Hiperface encoder, IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.7 in (220 mm)","Inertia":"0.0 kg.cm² of brake 0.58 kg.cm² of motor","Key width":"0.2 in (5 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.2 in (30 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.58 kg.cm²","Nominal torque":"26.99 lbf.in (3.05 N.m) 115 V single phase 26.11 lbf.in (2.95 N.m) 230 V single phase 23.28 lbf.in (2.63 N.m) 400 V three phase 23.28 lbf.in (2.63 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"1.4 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"830 W","Mounting Support":"International standard flange","Sizing reference":"SH30703M","Back emf constant":"95 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"100.01 lbf.in (11.3 N.m) 115...480 V three phase","Stator inductance":"27.65 mH","Stator resistance":"10.7 Ohm","Maximum current Irms":"8.7 A","Nominal output power":"240 W 115 V single phase 460 W 230 V single phase 880 W 400 V three phase 1030 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Output current 3s peak":"8.7 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.1 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/c235647c460898c7b0e18ef76e1fee32.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH30703M01A1200/sh3-servomotor-70mm-3-stacks-high-torque-smooth-shaft-sincos-singleturn-128-no-brake-straight-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30703M01A1200/alternatives.json"},"ai":{"faq":[{"question":"What encoder type does SH30703M01A1200 use?","answer":"Absolute single-turn SinCos Hiperface encoder — provides absolute position at power-up without a homing sequence, compatible with drives that support Hiperface protocol."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30703M01A1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30703M01A1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}