{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30703M01F1000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30703M01F1000","canonicalUrl":"https://aoctrl.com/schneider/SH30703M01F1000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30703M01F1000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH30703M01F1000, 830 W continuous power, three-phase, absolute single-turn SinCos Hiperface encoder, IP65/IP54, 3 N.m holding brake.","salesMarkdown":"## Speed and torque across supply voltages The SH30703M01F1000 delivers rated speed that depends on the supply: 750 rpm on 115 V single-phase, 1500 rpm on 230 V single-phase, 3000 rpm on 400 V three-phase, and 3600 rpm on 480 V three-phase. Nominal torque also shifts with voltage — 3.05 N.m at 115 V single-phase, 2.95 N.m at 230 V single-phase, and 2.63 N.m at both 400 V and 480 V three-phase. Continuous output power follows the same pattern: 240 W at 115 V single-phase, 460 W at 230 V single-phase, 880 W at 400 V three-phase, and 1030 W at 480 V three-phase. The 830 W continuous power figure in the spec table corresponds to the three-phase supply range. ## Encoder, brake, and environmental sealing The absolute single-turn SinCos Hiperface encoder provides position feedback without needing a homing sequence on power-up — the rotor position is known immediately. This matters on a machine where the axis must hold position through a power cycle. A holding brake is integrated, rated at 3 N.m holding torque. It engages when the motor is unpowered, preventing the load from drifting on a vertical axis or during an E-stop. The motor carries dual IP ratings: IP54 at the shaft bushing without a shaft seal ring, and IP65 for the motor body and shaft bushing when the seal ring is fitted, per IEC 60034-5. The IP65 rating suits washdown environments; the IP54 baseline covers dry indoor panels.","metaTitle":"Schneider Electric SH30703M01F1000 Servo Motor with Brake","metaDescription":"Schneider Electric SH30703M01F1000 SH3 servo motor with holding brake. 830 W continuous power, absolute single-turn Hiperface encoder, IP65/IP54.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"10 in (254 mm)","Key width":"0.2 in (5 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.2 in (30 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.807 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"26.99 lbf.in (3.05 N.m) 115 V single phase 26.11 lbf.in (2.95 N.m) 230 V single phase 23.28 lbf.in (2.63 N.m) 400 V three phase 23.28 lbf.in (2.63 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"1.4 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"830 W","Mounting Support":"International standard flange","Sizing reference":"SH30703M","Back emf constant":"95 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"100.01 lbf.in (11.3 N.m) 115...480 V three phase","Stator inductance":"76.85 mH","Stator resistance":"10.7 Ohm","Maximum current Irms":"8.7 A","Nominal output power":"240 W 115 V single phase 460 W 230 V single phase 880 W 400 V three phase 1030 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.1 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/bc9f75d4602f811e61b425aca38ec814.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH30703M01F1000/sh3-servomotor-70mm-3-stacks-high-torque-smooth-shaft-sincos-singleturn-128-brake-straight-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30703M01F1000/alternatives.json"},"ai":{"faq":[{"question":"What is the maximum mechanical speed of the SH30703M01F1000?","answer":"The maximum mechanical speed is 8000 rpm, which exceeds the rated speeds at all supply voltages. The rotor inertia is 0.807 kg.cm²."},{"question":"What encoder type does the SH30703M01F1000 use?","answer":"It uses an absolute single-turn SinCos Hiperface encoder. This provides absolute position within one revolution and sinusoidal commutation signals for the drive."},{"question":"What is the holding brake torque on this servo motor?","answer":"The integrated holding brake provides 3 N.m (26.6 lbf.in) of holding torque. It engages when power is removed from the motor."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30703M01F1000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30703M01F1000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}