{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30703M01F1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30703M01F1200","canonicalUrl":"https://aoctrl.com/schneider/SH30703M01F1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH30703M01F1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30703M01F1200, SH3 series servo motor with brake, 830 W continuous power, 3.05 N.m nominal torque, 3 N.m holding brake, absolute single-turn SinCos Hiperface encoder, IP65 motor, 70 mm flange.","salesMarkdown":"## Motor dimensions and mounting — 70 mm flange, 254 mm body The SH30703M01F1200 carries a 70 mm (2.8 in) international standard flange with a 60 mm centring collar and 5.5 mm mounting holes — fits the common IEC frame pattern for this power class. Overall length is 254 mm (10 in) with a 14 mm smooth shaft extending 30 mm and a 5 mm keyway — the shaft end is smooth, so the coupling bore must match the keyed section. ## Torque and speed across supply voltages Nominal torque holds at 3.05 N.m on 115 V single-phase, 2.95 N.m on 230 V single-phase, and 2.63 N.m on 400/480 V three-phase — the motor delivers usable torque across a wide input range, but peak torque on three-phase is 11.3 N.m for acceleration transients. Nominal speed varies with supply: 750 rpm at 115 V single-phase, 1500 rpm at 230 V single-phase, 3000 rpm at 400 V three-phase, and 3600 rpm at 480 V three-phase. Maximum mechanical speed is 8000 rpm, so the drive must limit the commanded speed to the motor's safe ceiling. ## Encoder and feedback — absolute single-turn Hiperface The motor ships with an absolute single-turn SinCos Hiperface encoder — no homing sequence needed on power-up for single-turn applications, and the SinCos signals give the drive fine position interpolation. The electrical connection uses a rotatable right-angle connector or a straight connector — the rotatable option helps route the feedback cable in tight cabinets without bending the cable below its minimum radius. ## Environmental protection and cooling IP65 on the motor body and shaft bushing, IP67 on the housing per IEC 60034-5 — the motor withstands washdown and dust ingress, but the connector must be mated correctly to maintain the seal. Cooling is by natural convection — no fan, so the motor relies on the mounting flange and ambient air for heat rejection. The continuous stall torque of 2.94 N.m at 2.1 A is the thermal limit; sustained operation above this current will raise the copper temperature toward the 130 °C hot-spot limit.","metaTitle":"Schneider Electric SH30703M01F1200 Servo Motor with Brake","metaDescription":"Schneider Electric SH30703M01F1200 servo motor with brake, 830 W continuous power, 3 N.m holding torque, IP65 motor, absolute encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"10 in (254 mm)","Key width":"0.2 in (5 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.2 in (30 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.807 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"26.99 lbf.in (3.05 N.m) 115 V single phase 26.11 lbf.in (2.95 N.m) 230 V single phase 23.28 lbf.in (2.63 N.m) 400 V three phase 23.28 lbf.in (2.63 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"1.4 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"830 W","Mounting Support":"International standard flange","Sizing reference":"SH30703M","Back emf constant":"95 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"100.01 lbf.in (11.3 N.m) 115...480 V three phase","Stator inductance":"76.85 mH","Stator resistance":"10.7 Ohm","Maximum current Irms":"8.7 A","Nominal output power":"240 W 115 V single phase 460 W 230 V single phase 880 W 400 V three phase 1030 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.1 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e4d95f27cd595939275d14b4dd6dd0d7.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH30703M01F1200/sh3-servomotor-70mm-3-stacks-high-torque-smooth-shaft-sincos-singleturn-128-brake-straight-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30703M01F1200/alternatives.json"},"ai":{"faq":[{"question":"How do I get current pricing and availability for SH30703M01F1200?","answer":"Submit an RFQ against your BOM quantity."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30703M01F1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30703M01F1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}