{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30703M01F2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30703M01F2000","canonicalUrl":"https://aoctrl.com/schneider/SH30703M01F2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30703M01F2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30703M01F2000 servo motor with brake, 830 W continuous power, three-phase, smooth shaft, absolute single-turn SinCos Hiperface encoder, IP54/IP65.","salesMarkdown":"## Motor ratings and supply voltage dependence The SH30703M01F2000: This SH3-frame servo motor delivers 830 W continuous power with a nominal torque that varies by supply: 3.05 N.m at 115 V single-phase, 2.95 N.m at 230 V single-phase, and 2.63 N.m at both 400 V three-phase and 480 V three-phase. The nominal speed also shifts with the line — 750 rpm at 115 V single-phase, 1500 rpm at 230 V single-phase, 3000 rpm at 400 V three-phase, and 3600 rpm at 480 V three-phase. That means the same motor body covers a wide range of line conditions, but the torque and speed you get depend on what voltage you feed it. Peak stall torque is 11.3 N.m across the 115–480 V three-phase range, and continuous stall torque sits at 2.94 N.m over the same range. The holding brake adds 3 N.m of holding torque — enough to keep the load stationary when power is removed, which is a common requirement for vertical-axis or conveyor stops. ## Encoder, feedback, and shaft details The motor carries an absolute single-turn SinCos Hiperface encoder — that gives you position feedback on power-up without needing a home cycle, and the single-turn resolution covers one revolution. The shaft is smooth, 14 mm diameter, with a 30 mm shaft length and a 5 mm keyway. The flange is a 70 mm international standard with a 60 mm centring collar and 5.5 mm mounting holes. ## Protection, cooling, and mechanical limits The motor is rated IP54 at the shaft bushing without a shaft seal ring, and IP65 for the motor body and shaft bushing when fitted with the seal ring — both conforming to IEC 60034-5. That means it handles dust and splash in most industrial enclosures, but washdown environments need the seal ring. Cooling is natural convection — no fan, so the thermal budget depends on the mounting surface and ambient air. Maximum radial force (Fr) is 730 N at 1000 rpm, dropping to 400 N at 6000 rpm. Maximum axial force (Fa) is 80 N. These limits govern bearing life — overshoot them and you'll see premature wear. The motor is 254 mm long and uses a straight connector with a rotatable right-angled option.","metaTitle":"Schneider Electric SH30703M01F2000 Servo Motor with Brake","metaDescription":"Schneider Electric SH30703M01F2000 servo motor with brake, 830 W continuous power, 3-phase, absolute single-turn Hiperface encoder, IP54/IP65. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30703M01F2000","Length":"10 in (254 mm)","Inertia":"0.227 kg.cm² of brake 0.0 kg.cm² of motor","Key width":"0.2 in (5 mm)","Shaft end":"Smooth shaft","description":"SH3 servomotor, 70mm, 3 stacks, high Torque, smooth Shaft, SinCos Singleturn 128, Brake, angular, IP54/65","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.2 in (30 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.807 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"26.99 lbf.in (3.05 N.m) 115 V single phase 26.11 lbf.in (2.95 N.m) 230 V single phase 23.28 lbf.in (2.63 N.m) 400 V three phase 23.28 lbf.in (2.63 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"1.4 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"830 W","Mounting Support":"International standard flange","Sizing reference":"SH30703M","Back emf constant":"95 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"100.01 lbf.in (11.3 N.m) 115...480 V three phase","Stator inductance":"76.85 mH","Stator resistance":"10.7 Ohm","Maximum current Irms":"8.7 A","Nominal output power":"240 W 115 V single phase 460 W 230 V single phase 880 W 400 V three phase 1030 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"80 N","Output current 3s peak":"8.7 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.1 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/3352669a43a57397c9b2eebf3f78a51f.pdf","sourceUrl":"https://www.se.com/us/en/product/SH30703M01F2000/sh3-servomotor-70mm-3-stacks-high-torque-smooth-shaft-sincos-singleturn-128-brake-angular-ip54-65/"},"ai":{"faq":[{"question":"What is the nominal torque of SH30703M01F2000 at 400 V three-phase?","answer":"At 400 V three-phase the nominal torque is 2.63 N.m (23.28 lbf.in). The same torque applies at 480 V three-phase."},{"question":"What encoder type does SH30703M01F2000 use?","answer":"It uses an absolute single-turn SinCos Hiperface encoder, providing position feedback on power-up without a homing sequence."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30703M01F2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30703M01F2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}