{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30703M02A2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30703M02A2100","canonicalUrl":"https://aoctrl.com/schneider/SH30703M02A2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30703M02A2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30703M02A2100, 830 W continuous power, 3000 rpm at 400 V three-phase, 2.63 N.m nominal torque, absolute multiturn SinCos Hiperface encoder, IP65, smooth shaft, 70 mm flange.","salesMarkdown":"## 830 W SH3 servo — voltage-dependent speed and torque The SH30703M02A2100 is a Schneider Electric SH3 series servo motor delivering 830 W continuous power from a 70 mm flange frame. Its nominal speed and torque are tied directly to the supply voltage: 3000 rpm at 400 V three-phase with 2.63 N.m, or 3600 rpm at 480 V three-phase with the same torque figure. On single-phase 230 V it drops to 1500 rpm and 2.95 N.m; on 115 V single-phase it runs 750 rpm at 3.05 N.m. The motor is a three-phase design and the peak stall torque hits 11.3 N.m across the 115–480 V three-phase range. This is a smooth-shaft variant without a holding brake — the load must be held externally or by the drive's holding brake resistor if the application requires position hold at power-down. The shaft measures 14 mm diameter by 30 mm length with a 5 mm keyway. Cooling is by natural convection only, so the thermal budget depends on the mounting surface and ambient — no fan to lean on for extended low-speed high-torque operation. ## Encoder feedback and environmental sealing Feedback comes from an absolute multiturn SinCos Hiperface encoder — this gives position and speed data over a SinCos link, compatible with Schneider's Lexium drive family and other drives supporting the Hiperface protocol. The multiturn absolute count survives power cycles, so homing on restart is unnecessary for most rotary axes. The motor body and shaft bushing carry an IP65 rating per IEC 60034-5, meaning it's sealed against dust ingress and low-pressure water jets. That suits it for washdown zones in food processing or wet machining environments, provided the mating connector (straight or rotatable right-angle,) is also IP65-rated and properly seated. The electrical connection uses a straight connector as standard, with a rotatable right-angle option available. ## Electrical parameters and bearing load limits The stator resistance measures 10.7 Ω with an inductance of 27.65 mH, and the torque constant is 1.4 N.m/A at 120 °C copper temperature. The back EMF constant is 95 V/krpm at 20 °C. Continuous stall current is 2.1 A, with a maximum RMS current of 8.7 A — the same figure is the 3-second peak current rating, so the drive's current loop should be limited to 8.7 A for short overloads and 2.1 A for continuous hold.","metaTitle":"Schneider Electric SH30703M02A2100 Servo Motor, 830 W","metaDescription":"Schneider Electric SH30703M02A2100 SH3 servo motor, 830 W continuous, 3000 rpm at 400 V three-phase. Absolute multiturn SinCos Hiperface encoder. IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.7 in (220 mm)","Inertia":"0.0 kg.cm² of brake 0.58 kg.cm² of motor","Key width":"0.2 in (5 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.2 in (30 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.58 kg.cm²","Nominal torque":"26.99 lbf.in (3.05 N.m) 115 V single phase 26.11 lbf.in (2.95 N.m) 230 V single phase 23.28 lbf.in (2.63 N.m) 400 V three phase 23.28 lbf.in (2.63 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"1.4 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"830 W","Mounting Support":"International standard flange","Sizing reference":"SH30703M","Back emf constant":"95 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"100.01 lbf.in (11.3 N.m) 115...480 V three phase","Stator inductance":"27.65 mH","Stator resistance":"10.7 Ohm","Maximum current Irms":"8.7 A","Nominal output power":"240 W 115 V single phase 460 W 230 V single phase 880 W 400 V three phase 1030 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Output current 3s peak":"8.7 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.1 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/7d6b9392216165d549003929ae5fa762.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH30703M02A2100/sh3-servomotor-70mm-3-stacks-high-torque-smooth-shaft-sincos-multiturn-128-no-brake-angular-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30703M02A2100/alternatives.json"},"ai":{"faq":[{"question":"What encoder type does SH30703M02A2100 use?","answer":"SH30703M02A2100 uses an absolute multiturn SinCos Hiperface encoder, providing position retention across power cycles and compatibility with drives supporting the Hiperface protocol."},{"question":"What is the IP rating of SH30703M02A2100?","answer":"The motor body and shaft bushing are rated IP65 per IEC 60034-5, offering dust-tight and water-jet protection suitable for washdown environments."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30703M02A2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30703M02A2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}