{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30703M02F1000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30703M02F1000","canonicalUrl":"https://aoctrl.com/schneider/SH30703M02F1000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30703M02F1000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30703M02F1000, SH3 series servo motor with brake, three-phase, 3000 rpm at 400 V, 3.05 N.m nominal torque, absolute multiturn SinCos Hiperface encoder, IP54/IP65.","salesMarkdown":"## Speed–voltage curve and the 3000 rpm design point The SH30703M02F1000 delivers 3000 rpm nominal at 400 V three-phase supply, with the speed scaling to 3600 rpm at 480 V three-phase and dropping to 750 rpm at 115 V single-phase. For a 400 V line, this is the rated operating point; the motor's continuous power at that condition is 880 W. ## Brake and encoder — what they mean for the application The holding brake delivers 3 N.m (26.6 lbf.in) holding torque, enough to hold a vertical-axis load at standstill without power to the motor. The absolute multiturn SinCos Hiperface encoder provides position feedback over multiple shaft revolutions — no homing sequence needed after a power cycle, which matters for tool-change or pick-and-place axes where lost position means a crash. ## Torque and overload margin across supply voltages Nominal torque is 3.05 N.m at 115 V single-phase, 2.95 N.m at 230 V single-phase, and 2.63 N.m at both 400 V and 480 V three-phase. Peak stall torque reaches 11.3 N.m across the three-phase range — roughly 4.3× the continuous stall torque of 2.94 N.m, giving a healthy overload margin for acceleration and in-position settling. ## Environmental sealing and mounting The motor carries IP54 at the shaft bushing without the shaft seal ring and IP65 with the seal ring fitted (per IEC 60034-5). In a washdown or coolant-mist environment, specify the shaft seal ring to keep the front bearing and encoder dry. The flange is the international standard 70 mm (2.8 in) size with a 60 mm centring collar and 5.5 mm mounting holes.","metaTitle":"Schneider Electric SH30703M02F1000 Servo Motor with Brake","metaDescription":"Schneider Electric SH30703M02F1000 servo motor with holding brake, 3 N.m holding torque, absolute multiturn SinCos Hiperface encoder, IP54/IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"10 in (254 mm)","Key width":"0.2 in (5 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.2 in (30 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.807 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"26.99 lbf.in (3.05 N.m) 115 V single phase 26.11 lbf.in (2.95 N.m) 230 V single phase 23.28 lbf.in (2.63 N.m) 400 V three phase 23.28 lbf.in (2.63 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"1.4 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"830 W","Mounting Support":"International standard flange","Sizing reference":"SH30703M","Back emf constant":"95 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"100.01 lbf.in (11.3 N.m) 115...480 V three phase","Stator inductance":"76.85 mH","Stator resistance":"10.7 Ohm","Maximum current Irms":"8.7 A","Nominal output power":"240 W 115 V single phase 460 W 230 V single phase 880 W 400 V three phase 1030 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.1 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/7c70ec2ad1fc8f8e8c95138f703fa865.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH30703M02F1000/sh3-servomotor-70mm-3-stacks-high-torque-smooth-shaft-sincos-multiturn-128-brake-straight-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30703M02F1000/alternatives.json"},"ai":{"faq":[{"question":"What is the holding torque of the brake on SH30703M02F1000?","answer":"The holding brake is rated at 3 N.m (26.6 lbf.in), sufficient to hold a vertical-axis load at rest without motor power."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30703M02F1000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30703M02F1000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}