{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30703M02F1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30703M02F1200","canonicalUrl":"https://aoctrl.com/schneider/SH30703M02F1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH30703M02F1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH30703M02F1200, 830 W continuous power, 3000 rpm at 400 V three-phase, 2.94 N.m continuous stall torque, IP65/IP67, absolute multiturn SinCos Hiperface encoder.","salesMarkdown":"## Motor ratings and speed-voltage mapping The SH30703M02F1200 is a Schneider Electric SH3 series servo motor with integrated holding brake, delivering 830 W continuous power from a 70 mm flange frame. Its nominal speed depends on the supply voltage: 750 rpm at 115 V single-phase, 1500 rpm at 230 V single-phase, 3000 rpm at 400 V three-phase, and 3600 rpm at 480 V three-phase. The maximum mechanical speed is 8000 rpm. Continuous stall torque is 2.94 N.m across the 115...480 V three-phase range, with a peak stall torque of 11.3 N.m. Nominal torque at 400 V three-phase is 2.63 N.m. The holding brake provides 3 N.m of holding torque, sufficient to keep the load stationary when power is removed. ## Encoder and feedback for position-critical axes This motor carries an absolute multiturn SinCos Hiperface encoder, giving position feedback without a home cycle after power loss. The multiturn count tracks shaft revolutions over a wide range, which suits gantry or rotary indexing axes where absolute position must be retained across power cycles. The back EMF constant is 95 V/krpm at 20 °C, and the torque constant is 1.4 N.m/A at 120 °C. These values let the drive tune current loops for the motor's winding characteristics without additional measurement. ## Sealing and environmental protection for washdown zones The motor body is rated IP65 per IEC 60034-5, the shaft bushing is IP65, and the housing is IP67. This means the motor withstands hose-directed water and temporary submersion, making it a candidate for food-and-beverage washdown lines or outdoor conveyor sections where coolant spray is present. ## Mechanical interface and connector options The motor mounts on an international standard flange with a 70 mm square pilot, 60 mm centring collar diameter, and 5.5 mm mounting holes. The shaft is 14 mm diameter, 30 mm long, smooth (no keyway), with a 5 mm key width. Overall length is 254 mm. Electrical connection is via a rotatable right-angled connector or a straight connector — both options are listed, so the cable exit direction can be oriented to fit tight cable-tray routing without a separate adapter.","metaTitle":"Schneider Electric SH30703M02F1200 Servo Motor with Brake","metaDescription":"Schneider Electric SH30703M02F1200 SH3 servo motor with holding brake, 830 W continuous power, 3000 rpm at 400 V three-phase.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"10 in (254 mm)","Key width":"0.2 in (5 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.2 in (30 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.807 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"26.99 lbf.in (3.05 N.m) 115 V single phase 26.11 lbf.in (2.95 N.m) 230 V single phase 23.28 lbf.in (2.63 N.m) 400 V three phase 23.28 lbf.in (2.63 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"1.4 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"830 W","Mounting Support":"International standard flange","Sizing reference":"SH30703M","Back emf constant":"95 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"100.01 lbf.in (11.3 N.m) 115...480 V three phase","Stator inductance":"76.85 mH","Stator resistance":"10.7 Ohm","Maximum current Irms":"8.7 A","Nominal output power":"240 W 115 V single phase 460 W 230 V single phase 880 W 400 V three phase 1030 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.1 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/5281c4c2242901dd2d4e7abe64a228df.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH30703M02F1200/sh3-servomotor-70mm-3-stacks-high-torque-smooth-shaft-sincos-multiturn-128-brake-straight-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30703M02F1200/alternatives.json"},"ai":{"faq":[{"question":"What is SH30703M02F1200's listed phase?","answer":"The motor is designed for three-phase operation. It also runs on single-phase supplies at reduced speed: 115 V single-phase gives 750 rpm, 230 V single-phase gives 1500 rpm."},{"question":"What encoder type does SH30703M02F1200 use?","answer":"It uses an absolute multiturn SinCos Hiperface encoder. This provides absolute position feedback over multiple shaft revolutions without requiring a homing sequence after power-up."},{"question":"What compliance documentation does Schneider Electric provide for SH30703M02F1200?","answer":"The motor carries IP65/IP67 protection ratings conforming to IEC 60034-5. The evidence does not list RoHS, REACH, or UL certifications specifically for this order code; confirm documentation requirements at RFQ."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30703M02F1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30703M02F1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}