{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30703M02F2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30703M02F2000","canonicalUrl":"https://aoctrl.com/schneider/SH30703M02F2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30703M02F2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor with brake, SH30703M02F2000, three-phase, 830 W continuous power, 3.05 Nm nominal torque, absolute multiturn SinCos Hiperface encoder, IP65, 14 mm shaft.","salesMarkdown":"## Motor ratings that decide the fit The SH30703M02F2000 delivers 830 W continuous power and 3.05 Nm nominal torque at 115 V single phase, stepping to 2.63 Nm at 400 V three phase — the torque curve shifts with the supply voltage, so the BOM voltage determines the usable output. Peak stall torque reaches 11.3 Nm across the 115–480 V three-phase range, enough for aggressive acceleration cycles on indexing tables or pick-and-place axes. The holding brake holds 3 Nm static torque with the motor unpowered — this is the figure that matters for vertical-axis safety, not the dynamic braking torque. ## Encoder and feedback — absolute position without homing Absolute multiturn SinCos Hiperface encoder means the drive knows the shaft position at power-up — no homing sequence needed after a power cycle, which saves cycle time on multi-axis machines. The encoder feedback is compatible with Schneider's Lexium drive family; the Hiperface protocol carries position and temperature data on a single cable pair. ## IP rating and cooling — where it can run IP54 on the shaft bushing without the shaft seal ring, IP65 on the motor body and with the shaft bushing seal ring fitted — the seal ring is the difference between washdown-capable and dry-area duty. Natural convection cooling means no fan noise or filter maintenance, but the 830 W rating assumes free airflow around the motor flange — derate if panel-mounted in a confined enclosure.","metaTitle":"Schneider Electric SH30703M02F2000 Servo Motor with Brake","metaDescription":"Schneider Electric SH30703M02F2000 servo motor with brake, 830 W continuous power, 3 Nm holding torque, absolute multiturn Hiperface encoder, IP65, active","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"10 in (254 mm)","Key width":"0.2 in (5 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.2 in (30 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.807 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"26.99 lbf.in (3.05 N.m) 115 V single phase 26.11 lbf.in (2.95 N.m) 230 V single phase 23.28 lbf.in (2.63 N.m) 400 V three phase 23.28 lbf.in (2.63 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"1.4 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"830 W","Mounting Support":"International standard flange","Sizing reference":"SH30703M","Back emf constant":"95 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"100.01 lbf.in (11.3 N.m) 115...480 V three phase","Stator inductance":"76.85 mH","Stator resistance":"10.7 Ohm","Maximum current Irms":"8.7 A","Nominal output power":"240 W 115 V single phase 460 W 230 V single phase 880 W 400 V three phase 1030 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.1 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/093e4f07e2ef0c16f16894a1c4866e14.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH30703M02F2000/sh3-servomotor-70mm-3-stacks-high-torque-smooth-shaft-sincos-multiturn-128-brake-angular-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30703M02F2000/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30703M02F2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30703M02F2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}