{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30703M11A2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30703M11A2000","canonicalUrl":"https://aoctrl.com/schneider/SH30703M11A2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30703M11A2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor, SH30703M11A2000, 830 W continuous, three-phase, absolute single-turn SinCos Hiperface encoder, IP65, without brake, international standard flange.","salesMarkdown":"## Supply voltage and speed — the torque curve changes with your line voltage The SH30703M11A2000: This SH3 servo motor from Schneider Electric is a three-phase design rated for 830 W continuous power. The nominal speed depends entirely on what voltage you feed it: 750 rpm at 115 V single phase, 1500 rpm at 230 V single phase, 3000 rpm at 400 V three phase, or 3600 rpm at 480 V three phase. That means a buyer on a 480 V line gets four times the speed of a 115 V line from the same motor — the torque available also shifts per voltage. The nominal torque at 400 V three phase is 2.63 N·m (23.28 lbf·in), and at 480 V three phase it holds the same 2.63 N·m. Peak stall torque reaches 11.3 N·m across the 115–480 V three-phase range, so the motor has headroom for acceleration and overload events. ## Encoder feedback — absolute single-turn SinCos Hiperface The encoder is an absolute single-turn SinCos Hiperface type. This means the drive knows the rotor position at power-up without a homing sequence — critical for applications where the machine must resume position immediately after a power cycle. The SinCos analog track also gives fine interpolation for velocity ripple control. The electrical connection uses a straight connector with a rotatable right-angled connector option, giving flexibility in cable routing inside a cabinet or on a moving axis. ## IP rating and cooling — washdown-ready with a shaft-seal caveat The shaft bushing without a shaft seal ring is only IP54, so the shaft exit point is the weak link: if the application sees direct spray on the shaft, specify the shaft seal ring variant. Cooling is natural convection — no fan, so the motor relies on its own surface area and the machine's airflow. The continuous stall current is 2.1 A, and the maximum continuous current (Irms) is 8.7 A. ## Mechanical interface — flange, shaft, and bearing loads The motor flange size is 70 mm (2.8 in) with an international standard flange and a centring collar of 60 mm diameter and 2.5 mm depth. The shaft is 14 mm diameter with a parallel key, key width 5 mm, shaft length 30 mm. Maximum radial force Fr is 730 N at 1000 rpm, dropping to 400 N at 6000 rpm. Maximum axial force Fa is 80 N. These set the bearing life limit when coupling to a load — a belt drive or overhung pulley must stay within these curves. The sizing reference is SH30703M, and the device short name is SH3. The motor is supplied without a holding brake — if your application requires a brake, this is the wrong variant.","metaTitle":"Schneider SH30703M11A2000 Servo Motor, 830 W, 3-Phase","metaDescription":"Schneider Electric SH30703M11A2000 SH3 servo motor, 830 W continuous, 3-phase, absolute single-turn SinCos Hiperface encoder, IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.7 in (220 mm)","Inertia":"0.0 kg.cm² of brake 0.58 kg.cm² of motor","Key width":"0.2 in (5 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.2 in (30 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.58 kg.cm²","Nominal torque":"26.99 lbf.in (3.05 N.m) 115 V single phase 26.11 lbf.in (2.95 N.m) 230 V single phase 23.28 lbf.in (2.63 N.m) 400 V three phase 23.28 lbf.in (2.63 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"1.4 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"830 W","Mounting Support":"International standard flange","Sizing reference":"SH30703M","Back emf constant":"95 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"100.01 lbf.in (11.3 N.m) 115...480 V three phase","Stator inductance":"27.65 mH","Stator resistance":"10.7 Ohm","Maximum current Irms":"8.7 A","Nominal output power":"240 W 115 V single phase 460 W 230 V single phase 880 W 400 V three phase 1030 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Output current 3s peak":"8.7 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.1 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/0c6e6fb433c4966820cdfb730b9bce21.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH30703M11A2000/sh3-servomotor-70mm-3-stacks-high-torque-keyed-shaft-sincos-singleturn-128-no-brake-angular-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30703M11A2000/alternatives.json"},"ai":{"faq":[{"question":"What encoder type does SH30703M11A2000 use?","answer":"It uses an absolute single-turn SinCos Hiperface encoder. This provides position at power-up without homing and supports fine velocity control via the SinCos analog track."},{"question":"What is the IP rating of this motor?","answer":"The motor body is IP65 per IEC 60034-5. The shaft bushing without a shaft seal ring is IP54 — the shaft exit is the ingress point to watch in washdown environments."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30703M11A2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30703M11A2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}