{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30703M11A2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30703M11A2100","canonicalUrl":"https://aoctrl.com/schneider/SH30703M11A2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30703M11A2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30703M11A2100, three-phase, 880 W nominal output at 400 V, 3000 rpm, IP65, absolute single-turn SinCos Hiperface encoder, without holding brake.","salesMarkdown":"## Speed-torque map across supply voltages The SH30703M11A2100: This SH3 frame servo motor delivers 3000 rpm nominal at 400 V three-phase supply, stepping up to 3600 rpm at 480 V three-phase. On single-phase 230 V it runs 1500 rpm, and on 115 V single-phase it drops to 750 rpm — the speed follows the line voltage, so the drive supply dictates the application's top speed. Nominal torque holds fairly flat across the voltage range: 2.63 N·m at 400 V and 480 V three-phase, versus 3.05 N·m at 115 V single-phase and 2.95 N·m at 230 V single-phase. The torque constant is 1.4 N·m/A at 120 °C copper temperature, which sets the current-to-torque relationship for the servo drive tuning. Continuous stall torque is 2.94 N·m across the 115–480 V three-phase range, with a continuous stall current of 2.1 A. Peak stall torque reaches 11.3 N·m, giving a 3.8× overload margin for acceleration and deceleration cycles. ## Encoder feedback and mechanical fit The absolute single-turn SinCos Hiperface encoder provides position feedback without needing a home cycle on power-up — the single-turn resolution is enough for applications where the load doesn't rotate more than one revolution from the reference. The straight connector and rotatable right-angled connector options let the cable exit adapt to tight cabinet layouts. Mounting uses an international standard flange with a 70 mm flange size and 60 mm centring collar. The shaft is 14 mm diameter with a parallel key, 30 mm shaft length, and the motor body length is 220 mm. Maximum radial force at the shaft nose is 730 N at 1000 rpm, derating to 400 N at 6000 rpm — budget this into the belt-drive or coupling selection. ## Sourcing and lifecycle status The SH3 series is a compact servo motor family; the sizing reference SH30703M identifies the frame and winding group. Confirm the mating drive's voltage class and encoder interface (Hiperface single-turn) before specifying.","metaTitle":"Schneider Electric SH30703M11A2100 Servo Motor, 880 W","metaDescription":"Schneider Electric SH30703M11A2100 SH3 servo motor, 880 W at 400 V three-phase, 3000 rpm, IP65, absolute single-turn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.7 in (220 mm)","Inertia":"0.0 kg.cm² of brake 0.58 kg.cm² of motor","Key width":"0.2 in (5 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.2 in (30 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.58 kg.cm²","Nominal torque":"26.99 lbf.in (3.05 N.m) 115 V single phase 26.11 lbf.in (2.95 N.m) 230 V single phase 23.28 lbf.in (2.63 N.m) 400 V three phase 23.28 lbf.in (2.63 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"1.4 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"830 W","Mounting Support":"International standard flange","Sizing reference":"SH30703M","Back emf constant":"95 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"100.01 lbf.in (11.3 N.m) 115...480 V three phase","Stator inductance":"27.65 mH","Stator resistance":"10.7 Ohm","Maximum current Irms":"8.7 A","Nominal output power":"240 W 115 V single phase 460 W 230 V single phase 880 W 400 V three phase 1030 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Output current 3s peak":"8.7 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.1 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/ff1bfaf0cfe8b49d7973d41b33019aea.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH30703M11A2100/sh3-servomotor-70mm-3-stacks-high-torque-keyed-shaft-sincos-singleturn-128-no-brake-angular-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30703M11A2100/alternatives.json"},"ai":{"faq":[{"question":"How do I get current pricing and availability for SH30703M11A2100?","answer":"Submit an RFQ against your BOM quantity."},{"question":"What is SH30703M11A2100's listed phase and nominal power at 400 V?","answer":"It is a three-phase motor. At 400 V three-phase supply, the nominal output power is 880 W and the nominal speed is 3000 rpm."},{"question":"What encoder type does SH30703M11A2100 use?","answer":"It uses an absolute single-turn SinCos Hiperface encoder. This provides absolute position within one revolution without requiring a homing sequence on power-up."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30703M11A2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30703M11A2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}