{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30703M11A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30703M11A2200","canonicalUrl":"https://aoctrl.com/schneider/SH30703M11A2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH30703M11A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30703M11A2200, 830 W continuous power, three-phase, IP65, absolute single-turn SinCos Hiperface encoder, 3.05 Nm nominal torque at 115 V, 70 mm flange.","salesMarkdown":"## 830 W continuous, three-phase supply, IP65 sealed The SH30703M11A2200 is a Schneider Electric SH3 series servo motor delivering 830 W continuous power and requiring a three-phase supply. The motor body is IP65-rated per IEC 60034-5, with the shaft bushing also IP65 and the housing IP67 — suitable for washdown environments in food processing or packaging lines where coolant or moisture ingress is a risk. Nominal torque varies with supply voltage: 3.05 Nm at 115 V single phase, 2.95 Nm at 230 V single phase, and 2.63 Nm at 400 V or 480 V three phase. Peak stall torque reaches 11.3 Nm across the 115–480 V three-phase range, giving the motor headroom for acceleration under load without saturating the drive. ## Absolute single-turn SinCos Hiperface encoder — no homing cycle needed The encoder is an absolute single-turn SinCos Hiperface type, meaning the motor reports its absolute position within one revolution on power-up — no reference-run or homing sequence required after a power cycle. This shaves time off the cycle budget in pick-and-place or palletizing cells where the robot must know the axis position immediately. The motor mounts on an international standard flange with a 70 mm flange size and a 60 mm centring collar diameter. The shaft is 14 mm diameter with a parallel key, and the overall length is 220 mm. These dimensions match the SH30703M sizing reference — confirm the mating drive and coupling before committing the BOM line.","metaTitle":"Schneider Electric SH30703M11A2200 Servo Motor, 830 W","metaDescription":"Schneider Electric SH30703M11A2200 SH3 servo motor, 830 W continuous, 3-phase, IP65, absolute single-turn SinCos Hiperface encoder, 3.05 Nm nominal torque at","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.7 in (220 mm)","Inertia":"0.0 kg.cm² of brake 0.58 kg.cm² of motor","Key width":"0.2 in (5 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.2 in (30 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.58 kg.cm²","Nominal torque":"26.99 lbf.in (3.05 N.m) 115 V single phase 26.11 lbf.in (2.95 N.m) 230 V single phase 23.28 lbf.in (2.63 N.m) 400 V three phase 23.28 lbf.in (2.63 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"1.4 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"830 W","Mounting Support":"International standard flange","Sizing reference":"SH30703M","Back emf constant":"95 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"100.01 lbf.in (11.3 N.m) 115...480 V three phase","Stator inductance":"27.65 mH","Stator resistance":"10.7 Ohm","Maximum current Irms":"8.7 A","Nominal output power":"240 W 115 V single phase 460 W 230 V single phase 880 W 400 V three phase 1030 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Output current 3s peak":"8.7 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.1 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/4ac865682a5366b76d2956e30f81c914.pdf","sourceUrl":"https://www.se.com/us/en/product/SH30703M11A2200/sh3-servomotor-70mm-3-stacks-high-torque-keyed-shaft-sincos-singleturn-128-no-brake-angular-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30703M11A2200/alternatives.json"},"ai":{"faq":[{"question":"What is the continuous stall current for the SH30703M11A2200?","answer":"The continuous stall current is 2.1 A. This is the current the motor draws at standstill while delivering rated continuous stall torque — use it to size the drive's continuous current rating and the thermal protection settings."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30703M11A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30703M11A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}