{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30703M11F1100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30703M11F1100","canonicalUrl":"https://aoctrl.com/schneider/SH30703M11F1100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30703M11F1100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series, SH30703M11F1100 servo motor with brake, 830 W continuous power, 3-phase, IP65, absolute single-turn SinCos Hiperface encoder, 70 mm flange.","salesMarkdown":"## Supply voltage drives the speed-power envelope This SH30703M11F1100 servo motor delivers 750 rpm on 115 V single-phase, 1500 rpm on 230 V single-phase, 3000 rpm on 400 V three-phase, and 3600 rpm on 480 V three-phase — the speed ceiling shifts with the supply you feed it. Nominal torque also varies: 3.05 N.m at 115 V single-phase, 2.95 N.m at 230 V single-phase, and 2.63 N.m at both 400 V and 480 V three-phase. The torque constant is 1.4 N.m/A at 120 °C copper temperature. Nominal output power follows the same pattern: 240 W on 115 V single-phase, 460 W on 230 V single-phase, 880 W on 400 V three-phase, and 1030 W on 480 V three-phase. The continuous power rating is 830 W — that's the sustained capability on a three-phase supply. ## Brake, encoder, and environmental sealing Comes with a holding brake rated at 3 N.m holding torque — this locks the shaft when power is removed, essential for vertical-axis loads that must not drift during a power loss or at standstill. The absolute single-turn SinCos Hiperface encoder gives position feedback on power-up without a homing move — the drive knows the rotor angle immediately. Maximum mechanical speed is 8000 rpm, so the motor can overspeed the rated speeds for short bursts if the drive allows. Sourced through authorized distribution channels against your BOM quantity.","metaTitle":"Schneider Electric SH30703M11F1100 Servo Motor with Brake","metaDescription":"Schneider Electric SH30703M11F1100 servo motor with brake, 830 W continuous power, 3-phase, IP65, absolute encoder. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"10 in (254 mm)","Key width":"0.2 in (5 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.2 in (30 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.807 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"26.99 lbf.in (3.05 N.m) 115 V single phase 26.11 lbf.in (2.95 N.m) 230 V single phase 23.28 lbf.in (2.63 N.m) 400 V three phase 23.28 lbf.in (2.63 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"1.4 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"830 W","Mounting Support":"International standard flange","Sizing reference":"SH30703M","Back emf constant":"95 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"100.01 lbf.in (11.3 N.m) 115...480 V three phase","Stator inductance":"76.85 mH","Stator resistance":"10.7 Ohm","Maximum current Irms":"8.7 A","Nominal output power":"240 W 115 V single phase 460 W 230 V single phase 880 W 400 V three phase 1030 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.1 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/13ef4e2c4c784d0c2908c95b72bb2853.pdf","sourceUrl":"https://www.se.com/mk/en/product/SH30703M11F1100/sh3-servomotor-70mm-3-stacks-high-torque-keyed-shaft-sincos-singleturn-128-brake-straight-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30703M11F1100/alternatives.json"},"ai":{"faq":[{"question":"How do I get current pricing and availability for SH30703M11F1100?","answer":"Submit an RFQ through this listing."},{"question":"What is SH30703M11F1100's listed phase?","answer":"It is a three-phase motor, though it can also run on single-phase supplies at reduced speed and torque as shown in the speed and torque tables."},{"question":"What compliance documentation does Schneider Electric provide for SH30703M11F1100?","answer":"The motor carries IP65 protection per IEC 60034-5. Standard Schneider documentation includes the product datasheet and installation manual — specific RoHS, REACH, and UL declarations are available on request through the RFQ process."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30703M11F1100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30703M11F1100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}