{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30703M11F1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30703M11F1200","canonicalUrl":"https://aoctrl.com/schneider/SH30703M11F1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH30703M11F1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH30703M11F1200, three-phase, 880 W nominal output at 400 V, 3000 rpm, IP65, absolute single-turn SinCos Hiperface encoder, 70 mm flange.","salesMarkdown":"## Speed and torque across the voltage range The SH30703M11F1200: This SH3 series motor delivers 3000 rpm at 400 V three-phase input, with nominal torque of 2.63 N.m and nominal output power of 880 W. At 480 V three-phase it reaches 3600 rpm and 1030 W, still with 2.63 N.m nominal torque. The continuous stall torque is 2.94 N.m across the three-phase voltage range, and the peak stall torque hits 11.3 N.m — useful for short acceleration bursts or overcoming static friction on a loaded axis. ## Encoder and feedback — absolute single-turn Hiperface The motor carries an absolute single-turn SinCos Hiperface encoder. Single-turn means position is known within one revolution after power-up — no homing routine needed on a rotary table or spindle that never rotates more than 360°. The SinCos analog track gives interpolated position for smooth low-speed regulation; the Hiperface protocol is common on Schneider and third-party servo drives. The connector is a rotatable right-angle or straight type, so the cable exit direction can be adjusted during installation. ## Holding brake and mechanical limits Fitted with a holding brake rated at 3 N.m static torque — enough to hold a vertical axis or tool changer at rest with the drive disabled. The maximum mechanical speed is 8000 rpm, well above the rated speeds, so the rotor and bearings are not the limiting factor if the drive runs field-weakening. Maximum radial force at the shaft is 730 N at 1000 rpm, derating to 400 N at 6000 rpm; axial force is limited to 80 N. The shaft is a parallel key design, 14 mm diameter, 30 mm length.","metaTitle":"Schneider Electric SH30703M11F1200 Servo Motor with Brake","metaDescription":"Schneider Electric SH30703M11F1200 servo motor with brake, 880 W at 400 V three-phase, 3000 rpm, IP65, absolute single-turn Hiperface encoder. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"10 in (254 mm)","Key width":"0.2 in (5 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.2 in (30 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.807 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"26.99 lbf.in (3.05 N.m) 115 V single phase 26.11 lbf.in (2.95 N.m) 230 V single phase 23.28 lbf.in (2.63 N.m) 400 V three phase 23.28 lbf.in (2.63 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"1.4 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"830 W","Mounting Support":"International standard flange","Sizing reference":"SH30703M","Back emf constant":"95 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"100.01 lbf.in (11.3 N.m) 115...480 V three phase","Stator inductance":"76.85 mH","Stator resistance":"10.7 Ohm","Maximum current Irms":"8.7 A","Nominal output power":"240 W 115 V single phase 460 W 230 V single phase 880 W 400 V three phase 1030 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.1 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/7456bb3abf682f03c03de27480152916.pdf","sourceUrl":"https://www.se.com/us/en/product/SH30703M11F1200/sh3-servomotor-70mm-3-stacks-high-torque-keyed-shaft-sincos-singleturn-128-brake-straight-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30703M11F1200/alternatives.json"},"ai":{"faq":[{"question":"Where can I buy SH30703M11F1200 and how do I get a price?","answer":"Submit an RFQ for current pricing and availability — confirmed at quote time."},{"question":"What is SH30703M11F1200's listed phase and length?","answer":"The motor is a three-phase design. The overall length is 10 inches (254 mm)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30703M11F1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30703M11F1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}