{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30703M11F2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30703M11F2000","canonicalUrl":"https://aoctrl.com/schneider/SH30703M11F2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30703M11F2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30703M11F2000 servo motor, SH3 series, three-phase, 830 W continuous power, with holding brake, absolute single-turn SinCos Hiperface encoder, IP54/IP65.","salesMarkdown":"## What this SH3 servo motor delivers The SH30703M11F2000 is a three-phase servo motor from the Schneider Electric SH3 series, rated for 830 W continuous power with a holding brake and an absolute single-turn SinCos Hiperface encoder. Nominal speed depends on the supply voltage: 750 rpm at 115 V single-phase, 1500 rpm at 230 V single-phase, 3000 rpm at 400 V three-phase, and 3600 rpm at 480 V three-phase — so the same motor covers multiple line voltages by reconnecting the windings. Nominal torque also shifts with supply: 26.99 lbf.in (3.05 N.m) at 115 V single-phase down to 23.28 lbf.in (2.63 N.m) at 400 V or 480 V three-phase. The holding brake delivers 26.6 lbf.in (3 N.m) to lock the shaft at rest. Peak stall torque reaches 100.01 lbf.in (11.3 N.m) across the 115...480 V three-phase range — useful for short-duration overloads during acceleration or reversing. ## Encoder, feedback, and position loop The absolute single-turn SinCos Hiperface encoder provides position feedback without a homing cycle on power-up — the drive knows the rotor angle immediately. This saves time on multi-axis lines where each axis would otherwise need to find its reference. Back EMF constant is 95 V/krpm at 68 °F (20 °C), and the torque constant is 1.4 N.m/A at 248 °F (120 °C) — both values the drive uses to calculate current commands for the demanded torque. Stator inductance is 76.85 mH and stator resistance is 10.7 Ohm — these set the electrical time constant and influence the current-loop tuning parameters in the servo drive. ## Mounting, cooling, and environmental fit The motor mounts on an international standard flange with a 2.8 in (70 mm) flange size and a 2.4 in (60 mm) centring collar. The shaft is 0.6 in (14 mm) diameter with a parallel key, 1.2 in (30 mm) shaft length. Cooling is natural convection — no fan or external blower required. The IP rating depends on the shaft seal: IP54 without a shaft seal ring, IP65 with the seal ring fitted. Both conform to IEC 60034-5. No direct pin-compatible alternative within the SH3 family is listed as a successor; the sizing reference SH30703M confirms this is the current build.","metaTitle":"Schneider Electric SH30703M11F2000 Servo Motor, 830 W","metaDescription":"Schneider Electric SH30703M11F2000 servo motor with brake, 830 W continuous power, 3-phase, absolute encoder, IP54/IP65. Active production — quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"10 in (254 mm)","Key width":"0.2 in (5 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.2 in (30 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.807 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"26.99 lbf.in (3.05 N.m) 115 V single phase 26.11 lbf.in (2.95 N.m) 230 V single phase 23.28 lbf.in (2.63 N.m) 400 V three phase 23.28 lbf.in (2.63 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"1.4 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"830 W","Mounting Support":"International standard flange","Sizing reference":"SH30703M","Back emf constant":"95 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"100.01 lbf.in (11.3 N.m) 115...480 V three phase","Stator inductance":"76.85 mH","Stator resistance":"10.7 Ohm","Maximum current Irms":"8.7 A","Nominal output power":"240 W 115 V single phase 460 W 230 V single phase 880 W 400 V three phase 1030 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.1 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/761d9c32a0df0dcc6f831a2a38b5528e.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH30703M11F2000/sh3-servomotor-70mm-3-stacks-high-torque-keyed-shaft-sincos-singleturn-128-brake-angular-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30703M11F2000/alternatives.json"},"ai":{"faq":[{"question":"How do I get pricing and availability for SH30703M11F2000?","answer":"Submit an RFQ through this listing."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30703M11F2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30703M11F2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}