{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30703M11F2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30703M11F2100","canonicalUrl":"https://aoctrl.com/schneider/SH30703M11F2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30703M11F2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH30703M11F2100, 830 W continuous power, three-phase, IP65, absolute single-turn SinCos Hiperface encoder, 70 mm flange.","salesMarkdown":"## Motor specs that decide the fit The SH30703M11F2100 is a three-phase servo motor from Schneider Electric's SH3 series, delivering 830 W continuous power. The phase requirement is the first gate — this is a three-phase-only motor, so a single-phase supply won't run it without a VFD that generates three-phase output. Speed and torque change with the supply voltage. At 400 V three-phase, nominal speed is 3000 rpm with 2.63 N.m nominal torque; at 480 V three-phase, it runs 3600 rpm with the same 2.63 N.m torque. The nominal output power at those voltages is 880 W and 1030 W respectively — the 830 W continuous rating is the thermal limit, not the peak output. The holding brake delivers 3 N.m holding torque, which holds the load at standstill without power to the motor windings. This is the spec that matters for vertical-axis applications or any position-hold scenario where the load must not drift when the drive is disabled. ## Encoder and feedback — what the Hiperface means The encoder is an absolute single-turn SinCos Hiperface type. Single-turn means it tracks position within one revolution — it knows exactly where the shaft is on power-up without a homing move, as long as the load hasn't been rotated more than one turn while powered off. The SinCos analog track gives high-resolution interpolation, and the Hiperface protocol is a common standard that mates with Schneider drives and many third-party servo drives that support the interface. The back EMF constant is 95 V/krpm at 20 °C. This sets the voltage the motor generates when spun by the load — important to check that the drive's DC bus can absorb regeneration without overvoltage tripping on fast decels. ## Physical mounting and environment The motor flange is 70 mm with a 60 mm centring collar that's 2.5 mm deep — this is the locating surface that aligns the motor to the machine frame. Four mounting holes at 5.5 mm diameter on the flange face. Overall length is 254 mm from the mounting face to the rear of the housing. IP65 rating on both the motor body and the shaft bushing means it's sealed against dust ingress and low-pressure water jets. That's suitable for washdown environments like food processing or packaging lines where the motor gets sprayed down. The connector is a straight or rotatable right-angled type — the rotatable option helps route the cable in tight enclosures. Cooling is natural convection — no external fan. The continuous torque rating assumes free air movement around the motor body; if it's mounted in a confined space or against a heat source, the continuous stall current of 2.1 A and the 130 °C copper temperature limit define the safe operating envelope.","metaTitle":"Schneider Electric SH30703M11F2100 Servo Motor with Brake","metaDescription":"Schneider Electric SH30703M11F2100 SH3 servo motor, 830 W continuous, 3-phase, IP65, with holding brake and absolute SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"10 in (254 mm)","Key width":"0.2 in (5 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.2 in (30 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.807 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"26.99 lbf.in (3.05 N.m) 115 V single phase 26.11 lbf.in (2.95 N.m) 230 V single phase 23.28 lbf.in (2.63 N.m) 400 V three phase 23.28 lbf.in (2.63 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"1.4 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"830 W","Mounting Support":"International standard flange","Sizing reference":"SH30703M","Back emf constant":"95 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"100.01 lbf.in (11.3 N.m) 115...480 V three phase","Stator inductance":"76.85 mH","Stator resistance":"10.7 Ohm","Maximum current Irms":"8.7 A","Nominal output power":"240 W 115 V single phase 460 W 230 V single phase 880 W 400 V three phase 1030 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.1 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/886205a81299cfc4244696a2b26e29ac.pdf","sourceUrl":"https://www.se.com/mk/en/product/SH30703M11F2100/sh3-servomotor-70mm-3-stacks-high-torque-keyed-shaft-sincos-singleturn-128-brake-angular-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30703M11F2100/alternatives.json"},"ai":{"faq":[{"question":"What is the closest alternative to SH30703M11F2100 in the SH3 family?","answer":"The sizing reference SH30703M identifies this specific frame size and winding; any substitution would require checking the full SH3 family catalog for matching flange, shaft, and electrical specs."},{"question":"What compliance documentation is available for SH30703M11F2100?","answer":"The motor carries IP65 per IEC 60034-5 on both the motor body and shaft bushing."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30703M11F2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30703M11F2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}