{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30703M11F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30703M11F2200","canonicalUrl":"https://aoctrl.com/schneider/SH30703M11F2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH30703M11F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH30703M11F2200, 830 W continuous power, 3 N.m holding torque, IP65/IP67, absolute single-turn SinCos Hiperface encoder, 70 mm flange.","salesMarkdown":"## Motor form factor and mounting constraints The SH30703M11F2200 mounts on an international standard flange with a 70 mm square pilot diameter and 60 mm centring collar, per IEC 60034-5. The 14 mm shaft carries a parallel key with a 5 mm key width and 30 mm shaft length; the overall body length is 254 mm. For panel integration, the IP65 motor body and shaft bushing, plus IP67 housing, allow direct washdown exposure without a secondary cover — the sealing is on the housing, not just the connector. ## Speed and torque across supply voltages Nominal speed depends on the supply: 750 rpm at 115 V single-phase, 1500 rpm at 230 V single-phase, 3000 rpm at 400 V three-phase, and 3600 rpm at 480 V three-phase. The maximum mechanical speed is 8000 rpm, providing overspeed margin for deceleration or transient conditions. Nominal torque ranges from 2.63 N.m at 400/480 V three-phase up to 3.05 N.m at 115 V single-phase; the holding brake delivers 3 N.m, sufficient to hold a vertical axis or prevent back-driving when power is removed. ## Feedback and electrical interface The encoder is an absolute single-turn SinCos Hiperface type, providing position feedback at power-up without a homing cycle — relevant for applications where the axis position must be known immediately after a power cycle. Electrical connection is via a straight connector or a rotatable right-angled connector, giving flexibility for cable routing in tight cabinets. The motor is three-phase, with 3 poles and a stator inductance of 76.85 mH and resistance of 10.7 Ohm. ## Thermal and environmental ratings Cooling is by natural convection — no external fan, so the motor relies on its own surface area and mounting flange for heat dissipation. The hot-spot copper temperature limit is 130 °C; the torque constant is specified at 120 °C copper temperature, reflecting the operating condition rather than a cold-start value. Continuous stall current is 2.1 A, with a maximum RMS current of 8.7 A. The IP65/IP67 rating means the motor withstands hose-directed water and temporary submersion, suitable for food processing or outdoor conveyor lines where washdown is routine.","metaTitle":"Schneider Electric SH30703M11F2200 Servo Motor with Brake","metaDescription":"Schneider Electric SH30703M11F2200 servo motor with brake, 830 W continuous power, 3 N.m holding torque, IP65/IP67, absolute encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"10 in (254 mm)","Key width":"0.2 in (5 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.2 in (30 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.807 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"26.99 lbf.in (3.05 N.m) 115 V single phase 26.11 lbf.in (2.95 N.m) 230 V single phase 23.28 lbf.in (2.63 N.m) 400 V three phase 23.28 lbf.in (2.63 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"1.4 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"830 W","Mounting Support":"International standard flange","Sizing reference":"SH30703M","Back emf constant":"95 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"100.01 lbf.in (11.3 N.m) 115...480 V three phase","Stator inductance":"76.85 mH","Stator resistance":"10.7 Ohm","Maximum current Irms":"8.7 A","Nominal output power":"240 W 115 V single phase 460 W 230 V single phase 880 W 400 V three phase 1030 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.1 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/68303e75ef29de91626e16acda2db1fe.pdf","sourceUrl":"https://www.se.com/us/en/product/SH30703M11F2200/sh3-servomotor-70mm-3-stacks-high-torque-keyed-shaft-sincos-singleturn-128-brake-angular-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30703M11F2200/alternatives.json"},"ai":{"faq":[{"question":"What is the holding torque of the brake on SH30703M11F2200?","answer":"The holding brake delivers 3 N.m (26.6 lbf.in). This is the static holding torque when the brake is engaged, sufficient to hold a vertical axis load or prevent shaft rotation when power is off."},{"question":"What encoder feedback does SH30703M11F2200 use?","answer":"It uses an absolute single-turn SinCos Hiperface encoder. This provides absolute position within one revolution at power-up, eliminating the need for a homing sequence on each power cycle."},{"question":"What IP rating does SH30703M11F2200 have?","answer":"The motor body and shaft bushing are IP65, and the housing is IP67, all conforming to IEC 60034-5. This means the motor withstands hose-directed water and temporary immersion, suitable for washdown environments."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30703M11F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30703M11F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}