{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30703M12A1000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30703M12A1000","canonicalUrl":"https://aoctrl.com/schneider/SH30703M12A1000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30703M12A1000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor, SH30703M12A1000, 880 W nominal at 400 V three-phase, 3000 rpm, absolute multiturn SinCos Hiperface encoder, IP65, 70 mm flange, without holding brake.","salesMarkdown":"## Motor dimensions and mounting footprint The SH30703M12A1000: Frame length is 220 mm (8.7 in) with a 70 mm (2.8 in) flange, centring collar 60 mm diameter and 2.5 mm deep — drops into the standard IEC 72-1 mounting pattern without a bracket adapter. Shaft is 14 mm diameter with a parallel key, 30 mm length, 5 mm key width — mates with common metric couplings and pulleys in the 0.6–1.2 kW servo range. ## Speed and torque across supply voltages Nominal torque holds near 2.6 N·m across the voltage range, with a slight drop at higher speeds: 3.05 N·m at 115 V, 2.95 N·m at 230 V, 2.63 N·m at both 400 V and 480 V three-phase. Peak stall torque reaches 11.3 N·m on three-phase supplies. Continuous stall current is 2.1 A with a 3-second peak of 8.7 A — the drive must be sized for the peak demand during acceleration and reversing cycles. ## Encoder feedback and environmental sealing Absolute multiturn SinCos Hiperface encoder gives position retention through power cycles without a home sequence — critical for gantry or rotary indexing applications where the controller needs the absolute position at power-up. IP65 rating on the motor body and shaft bushing per IEC 60034-5, with natural convection cooling — suitable for washdown zones and dusty environments without a fan, but the IP54 shaft bushing without seal ring means the shaft seal must be verified if coolant spray hits the front face.","metaTitle":"Schneider SH30703M12A1000 SH3 Servo Motor, 880 W, 3000 rpm","metaDescription":"Schneider Electric SH30703M12A1000 SH3 servo motor, 880 W at 400 V three-phase, 3000 rpm, absolute multiturn SinCos Hiperface encoder, IP65. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.7 in (220 mm)","Inertia":"0.0 kg.cm² of brake 0.58 kg.cm² of motor","Key width":"0.2 in (5 mm)","Shaft end":"Parallel key","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.2 in (30 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.58 kg.cm²","Nominal torque":"26.99 lbf.in (3.05 N.m) 115 V single phase 26.11 lbf.in (2.95 N.m) 230 V single phase 23.28 lbf.in (2.63 N.m) 400 V three phase 23.28 lbf.in (2.63 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"1.4 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"830 W","Mounting Support":"International standard flange","Sizing reference":"SH30703M","Back emf constant":"95 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"100.01 lbf.in (11.3 N.m) 115...480 V three phase","Stator inductance":"27.65 mH","Stator resistance":"10.7 Ohm","Maximum current Irms":"8.7 A","Nominal output power":"240 W 115 V single phase 460 W 230 V single phase 880 W 400 V three phase 1030 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Output current 3s peak":"8.7 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.1 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/c626ee4291a88c4bedea192582c45f38.pdf","sourceUrl":"https://www.se.com/ca/en/product/SH30703M12A1000/sh3-servomotor-70mm-3-stacks-high-torque-keyed-shaft-sincos-multiturn-128-no-brake-straight-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30703M12A1000/alternatives.json"},"ai":{"faq":[{"question":"How can I order SH30703M12A1000 and check pricing?","answer":"Submit an RFQ for current pricing and availability — lead time and volume breaks are confirmed at quote time."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30703M12A1000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30703M12A1000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}