{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30703M12A2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30703M12A2000","canonicalUrl":"https://aoctrl.com/schneider/SH30703M12A2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30703M12A2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30703M12A2000, 830 W continuous power, three-phase, absolute multiturn SinCos Hiperface encoder, IP54/IP65, 70 mm flange.","salesMarkdown":"## 830 W continuous, three voltage families The SH30703M12A2000 is an SH3-series servo motor from Schneider Electric, rated for 830 W continuous power. It delivers nominal torque from 23.28 lbf·in (2.63 N·m) on 400/480 V three-phase supply up to 26.99 lbf·in (3.05 N·m) on 115 V single-phase, with nominal speeds spanning 750 rpm (115 V single-phase) to 3600 rpm (480 V three-phase). The motor carries an absolute multiturn SinCos Hiperface encoder, giving position feedback without a homing cycle after power loss — a practical advantage on multi-axis lines where the controller needs to know the load position immediately on restart. ## Mounting, shaft, and protection Flange size is 70 mm (2.8 in) with a 60 mm centring collar and 2.5 mm collar depth, matching the standard IEC metric flange pattern. The shaft is 14 mm diameter with a parallel key, 30 mm shaft length, and 5 mm key width — a common fit for coupling to ball screws or timing-belt pulleys in packaging and material-handling builds. The IP rating depends on the shaft seal: IP54 at the shaft bushing without a seal ring, or IP65 with the seal ring fitted. The motor body itself is rated IP65 per IEC 60034-5, so in a washdown zone the shaft seal choice is what governs the wet-end barrier. Electrical connection options include a straight connector or a rotatable right-angled connector — useful when cable routing is tight against the machine frame. ## Stall torque, peak current, and thermal limits Continuous stall torque is 2.94 N·m (26.02 lbf·in) across the 115–480 V range, drawn at 2.1 A continuous stall current. Peak stall torque reaches 11.3 N·m (100.01 lbf·in) with an 8.7 A peak current for 3 seconds — this is the figure to size the drive's peak current capability against for acceleration moves. Cooling is natural convection only — no forced-air or liquid cooling. The hot-spot copper temperature is rated at 130 °C, so in a confined panel or high-ambient enclosure the duty cycle may need derating below the continuous torque figure. Sourced through independent distribution channels.","metaTitle":"Schneider Electric SH30703M12A2000 Servo Motor, 830 W","metaDescription":"Schneider Electric SH30703M12A2000 SH3 servo motor, 830 W continuous power, 3-phase, absolute multiturn encoder. Active production. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30703M12A2000","Length":"8.7 in (220 mm)","Inertia":"0.0 kg.cm² of brake 0.58 kg.cm² of motor","Key width":"0.2 in (5 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 70mm, 3 stacks, high Torque, keyed Shaft, SinCos Multiturn 128, no Brake, angular, IP54/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.2 in (30 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.58 kg.cm²","Nominal torque":"26.99 lbf.in (3.05 N.m) 115 V single phase 26.11 lbf.in (2.95 N.m) 230 V single phase 23.28 lbf.in (2.63 N.m) 400 V three phase 23.28 lbf.in (2.63 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"1.4 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"830 W","Mounting Support":"International standard flange","Sizing reference":"SH30703M","Back emf constant":"95 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"100.01 lbf.in (11.3 N.m) 115...480 V three phase","Stator inductance":"27.65 mH","Stator resistance":"10.7 Ohm","Maximum current Irms":"8.7 A","Nominal output power":"240 W 115 V single phase 460 W 230 V single phase 880 W 400 V three phase 1030 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Output current 3s peak":"8.7 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.1 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/255263fe5c15096464e5261b699b3874.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH30703M12A2000/sh3-servomotor-70mm-3-stacks-high-torque-keyed-shaft-sincos-multiturn-128-no-brake-angular-ip54-65/"},"ai":{"faq":[{"question":"What is SH30703M12A2000's listed phase?","answer":"Three-phase, though the motor also accepts single-phase 115 V and 230 V supplies at reduced power — 240 W and 460 W nominal respectively."},{"question":"What is SH30703M12A2000's listed length?","answer":"220 mm (8.7 in) overall body length, excluding the shaft extension and connector."},{"question":"What compliance documentation does Schneider Electric provide for SH30703M12A2000?","answer":"The motor carries IP ratings per IEC 60034-5. Standard compliance documentation (RoHS, REACH, CE, UKCA) is available from Schneider Electric's documentation portal; no UL or CSA listing is cited in the spec record."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30703M12A2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30703M12A2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}