{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30703P02A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30703P02A2200","canonicalUrl":"https://aoctrl.com/schneider/SH30703P02A2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH30703P02A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30703P02A2200, three-phase, 1330 W continuous power, 6000 rpm, IP65, absolute multiturn SinCos Hiperface encoder, smooth shaft, 70 mm flange.","salesMarkdown":"## Speed-torque envelope across supply voltages The SH30703P02A2200: This SH3 series motor delivers a nominal speed that depends on the supply: 1500 rpm at 115 V single-phase, 3000 rpm at 230 V single-phase, 6000 rpm at 400 V three-phase, and 7200 rpm at 480 V three-phase. The nominal torque also shifts with voltage — 2.95 N·m at 115 V single-phase down to 2.1 N·m at 400 V three-phase and 480 V three-phase. That means the motor is wound for a wide voltage range, but the peak torque density lives at the lower single-phase voltages; at 400 V three-phase the speed doubles but the torque drops by about 30%. Continuous power is 1330 W, with the peak stall torque reaching 11.3 N·m across the 115...480 V three-phase range. The continuous stall current sits at 4.1 A, while the 3-second peak current is 17.0 A — so the motor can deliver short bursts of high torque for acceleration or load disturbances without tripping the drive. ## Feedback and environmental sealing The encoder is an absolute multiturn SinCos Hiperface type — single-cable feedback for position and speed, no battery-backed multiturn count to lose on power cycle. The motor carries IP65 on the housing and shaft bushing per IEC 60034-5, with the housing rated IP67. That makes it suitable for washdown or dusty environments as long as the mating connector is properly seated.","metaTitle":"Schneider Electric SH30703P02A2200 Servo Motor, 1330 W","metaDescription":"Schneider Electric SH30703P02A2200 SH3 servo motor, 1330 W continuous power, 6000 rpm at 400 V three-phase, IP65, absolute multiturn Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30703P02A2200","Length":"8.7 in (220 mm)","Inertia":"0.0 kg.cm² of brake 0.58 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 70mm, 3 stacks, smooth Shaft, SinCos Multiturn 128, no Brake, angular, IP65/67","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.2 in (30 mm)","Holding brake":"Without","Nominal speed":"1500 rpm 115 V single phase 3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.58 kg.cm²","Nominal torque":"26.11 lbf.in (2.95 N.m) 115 V single phase 24.8 lbf.in (2.8 N.m) 230 V single phase 18.6 lbf.in (2.1 N.m) 400 V three phase 18.6 lbf.in (2.1 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"0.72 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1330 W","Mounting Support":"International standard flange","Sizing reference":"SH30703P","Back emf constant":"49 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"100.01 lbf.in (11.3 N.m) 115...480 V three phase","Stator inductance":"7.3 mH","Stator resistance":"2.7 Ohm","Maximum current Irms":"17.0 A","Nominal output power":"460 W 115 V single phase 880 W 230 V single phase 1450 W 400 V three phase 1550 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"80 N","Output current 3s peak":"17.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"4.1 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,835.46","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/1996a42cf6105f3097be85bc7f2ff09a.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30703P02A2200/sh3-servomotor-70mm-3-stacks-smooth-shaft-sincos-multiturn-128-no-brake-angular-ip65-67/"},"ai":{"faq":[{"question":"What is the encoder type on SH30703P02A2200?","answer":"It uses an absolute multiturn SinCos Hiperface encoder, providing position and speed feedback over a single cable without a battery backup for the multiturn count."},{"question":"What IP rating does SH30703P02A2200 have?","answer":"The motor housing and shaft bushing are rated IP65 per IEC 60034-5, with the housing also rated IP67. This allows use in washdown or dusty environments when the connector is properly sealed."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30703P02A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30703P02A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}