{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30703P0AA3100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30703P0AA3100","canonicalUrl":"https://aoctrl.com/schneider/SH30703P0AA3100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30703P0AA3100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30703P0AA3100, three-phase, 1330 W continuous power, 3000 rpm nominal speed, absolute single-turn Hiperface DSL encoder, IP65, smooth shaft, without brake.","salesMarkdown":"## Supply voltage drives the speed and torque you get The SH30703P0AA3100: This SH3 servo motor is a three-phase design, but its performance depends on the supply you feed it. On 230 V single-phase the nominal speed is 3000 rpm; step up to 400 V three-phase and it reaches 6000 rpm; at 480 V three-phase it hits 7200 rpm. The nominal torque follows the same pattern: 2.8 N·m at 230 V, dropping to 2.1 N·m at both 400 V and 480 V. Continuous power is 1330 W at 400/480 V, with the nominal output power rated 830 W on 230 V single-phase. If your line voltage is fixed at 230 V single-phase, you lose about 38% of the continuous power compared to a three-phase feed — plan the motor selection around the actual supply, not the datasheet maximum. ## Encoder and feedback — absolute single-turn Hiperface DSL The motor carries an absolute single-turn Hiperface DSL encoder. That means position is known immediately on power-up without a homing move — useful for applications where the axis must resume from the last commanded position after a power cycle. Single-turn limits the absolute range to one revolution; multi-turn applications need a different encoder option. The electrical connection uses a quicklock straight connector. The connector is straight, not angled, so account for cable bend radius in the cable tray or drag chain layout. ## IP65 and mechanical limits for the mounting engineer Both the motor body and the shaft bushing carry IP65 per IEC 60034-5. The motor flange is 70 mm (2.8 in) with a 60 mm centring collar and 5.5 mm mounting holes. Maximum radial force at 1000 rpm is 1050 N; maximum axial force is 160 N. These limits govern bearing life — overshoot them and the encoder alignment drifts or the bearings fail early. Smooth shaft, 14 mm diameter, 30 mm shaft length. No keyway — the coupling or pulley must clamp onto the smooth shaft. Maximum mechanical speed is 8000 rpm, so the 7200 rpm at 480 V stays within the safe envelope. ## Stall torque and current — what the drive sees Continuous stall torque is 2.94 N·m at 115–480 V three-phase, with a continuous stall current of 4.1 A. Peak stall torque reaches 11.3 N·m at the same voltage range, drawing up to 17 A maximum current. The torque constant is 0.72 N·m/A at 120 °C copper temperature. Stator resistance is 2.7 Ω and inductance 14.6 mH. These values set the electrical time constant and influence the servo drive's tuning parameters — expect a longer current rise time than a low-inductance motor, which may limit bandwidth in high-dynamic applications.","metaTitle":"Schneider Electric SH30703P0AA3100 Servo Motor, 1330 W","metaDescription":"Schneider Electric SH30703P0AA3100 servo motor, 1330 W continuous power, 3000 rpm nominal speed, absolute single-turn Hiperface DSL encoder, IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.7 in (220 mm)","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"1.2 in (30 mm)","Holding brake":"Without","Nominal speed":"3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.580 kg.cm²","Nominal torque":"24.8 lbf.in (2.8 N.m) 230 V single phase 18.6 lbf.in (2.1 N.m) 400 V three phase 18.6 lbf.in (2.1 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"0.72 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1330 W","Mounting Support":"International standard flange","Sizing reference":"SH30703P","Back emf constant":"49 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"100.01 lbf.in (11.3 N.m) 115...480 V three phase","Stator inductance":"14.6 mH","Stator resistance":"2.7 Ohm","Maximum current Irms":"17 A","Nominal output power":"830 W 230 V single phase 1330 W 400 V three phase 1330 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"160 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"1050 N 1000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"4.1 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/832635f2431785b3c260ed16d3c451eb.pdf","sourceUrl":"https://www.se.com/be/en/product/SH30703P0AA3100/sh3-servomotor-70mm-3-stacks-smooth-shaft-singleturn-dsl-18bit-no-brake-onemotorcable-straight-m23-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30703P0AA3100/alternatives.json"},"ai":{"faq":[{"question":"What supply voltage does SH30703P0AA3100 need?","answer":"It is a three-phase motor. Performance varies with voltage: 230 V single-phase gives 3000 rpm and 2.8 N·m nominal torque; 400 V three-phase gives 6000 rpm and 2.1 N·m; 480 V three-phase gives 7200 rpm and 2.1 N·m."},{"question":"What encoder type does SH30703P0AA3100 use?","answer":"It uses an absolute single-turn Hiperface DSL encoder. Position is known on power-up without a homing move, but single-turn limits absolute range to one revolution."},{"question":"What is the IP rating of SH30703P0AA3100?","answer":"IP65 for both the motor body and the shaft bushing, per IEC 60034-5. Suitable for washdown and dusty environments when the connector is also IP-rated."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30703P0AA3100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30703P0AA3100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}