{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30703P0AA4000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30703P0AA4000","canonicalUrl":"https://aoctrl.com/schneider/SH30703P0AA4000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30703P0AA4000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30703P0AA4000 SH3 servo motor, three-phase, 1330 W continuous power at 400/480 V, 2.8 Nm nominal torque, 3000 rpm, absolute single-turn Hiperface DSL encoder, smooth shaft, IP65, natural convection cooling.","salesMarkdown":"## Motor ratings and supply voltage dependency The SH30703P0AA4000 delivers 1330 W continuous power when fed from 400 V or 480 V three-phase supply, dropping to 830 W on 230 V single-phase. Nominal torque follows the same split: 2.8 Nm on 230 V single-phase, 2.1 Nm on either 400 V or 480 V three-phase. Peak stall torque reaches 11.3 Nm across the 115–480 V three-phase range, with continuous stall torque at 2.94 Nm and continuous stall current of 4.1 A. The 17.0 A peak (3 s) output current sets the drive sizing floor for acceleration duty. ## Encoder and feedback — Hiperface DSL single-turn Absolute single-turn Hiperface DSL encoder — no battery-backed multi-turn count, so the position reference resets on power cycle. The DSL protocol runs over a single cable pair, combining power and data; the drive must support Hiperface DSL to interpret the feedback. Motor pole count is 3.0 — set this in the drive's motor parameter list for correct commutation and speed loop tuning. Back EMF constant is 49 V/krpm at 20 °C, and torque constant is 0.72 Nm/A at 120 °C hot copper. ## Mechanical interface and mounting constraints International standard flange, 70 mm (2.8 in) square, with a 60 mm centring collar and 2.5 mm collar depth. Four mounting holes at 5.5 mm diameter on the flange corners — standard bolt pattern for this frame size. Smooth shaft, 14 mm diameter, 30 mm shaft length. No keyway — the coupling must transmit torque through a clamping or friction fit. Maximum radial force is 1050 N at 1000 rpm; maximum axial force is 160 N. Overall length is 220 mm (8.7 in). Natural convection cooling — no integrated fan, so the motor relies on the drive's current limit and the mounting surface for thermal management. ## Environmental sealing and connection options IP65 rated per IEC 60034-5 for the motor body, but the shaft bushing without a shaft seal ring drops to IP54. In washdown or coolant-spray zones, fit the optional shaft seal ring to maintain IP65 at the shaft exit. Two connector variants listed: a straight connector and a quicklock rotatable right-angled connector. The rotatable version helps in tight cable egress paths without bending the cable below its minimum bend radius. ## Lifecycle and sourcing — current production The SH30703P sizing reference anchors this to the SH3 family; any substitution would require a full motor-drive re-commissioning.","metaTitle":"Schneider Electric SH30703P0AA4000 Servo Motor, 1330 W","metaDescription":"Schneider Electric SH30703P0AA4000 SH3 servo motor, 1330 W continuous power at 400/480 V three-phase, 2.8 Nm nominal torque, absolute single-turn Hiperface DSL","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30703P0AA4000","Length":"8.7 in (220 mm)","Inertia":"0.0 kg.cm² of brake 0.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 70mm, 3 stacks, smooth Shaft, Singleturn DSL 18bit, no Brake, OneMotorCable angular M23, IP54/65","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"1.2 in (30 mm)","Holding brake":"Without","Nominal speed":"3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.580 kg.cm²","Nominal torque":"24.8 lbf.in (2.8 N.m) 230 V single phase 18.6 lbf.in (2.1 N.m) 400 V three phase 18.6 lbf.in (2.1 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"0.72 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1330 W","Mounting Support":"International standard flange","Sizing reference":"SH30703P","Back emf constant":"49 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"100.01 lbf.in (11.3 N.m) 115...480 V three phase","Stator inductance":"14.6 mH","Stator resistance":"2.7 Ohm","Maximum current Irms":"17.0 A","Nominal output power":"830 W 230 V single phase 1330 W 400 V three phase 1330 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"quicklock rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"160 N","Output current 3s peak":"17.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"1050 N 1000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"4.1 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,276.56","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/80d71f696e19a17d8d3840aa05abd64b.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30703P0AA4000/sh3-servomotor-70mm-3-stacks-smooth-shaft-singleturn-dsl-18bit-no-brake-onemotorcable-angular-m23-ip54-65/"},"ai":{"faq":[{"question":"What is the closest pin-compatible alternative to SH30703P0AA4000 in this Servo Motors with Brake family?","answer":"The SH30703P sizing reference anchors this to the SH3 family; any substitution would require a full motor-drive re-commissioning."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30703P0AA4000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30703P0AA4000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}