{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30703P0AA4100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30703P0AA4100","canonicalUrl":"https://aoctrl.com/schneider/SH30703P0AA4100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30703P0AA4100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30703P0AA4100, 1330 W continuous power, 3000 rpm nominal speed, 2.8 N·m nominal torque, absolute single-turn Hiperface DSL encoder, IP65, smooth shaft, 70 mm flange, natural convection cooling.","salesMarkdown":"## Motor rating at 400/480 V three-phase — where the torque lives The SH30703P0AA4100: This SH3-frame servo delivers 1330 W continuous power and 2.8 N·m nominal torque at 3000 rpm when fed from a 400 V or 480 V three-phase supply. At 230 V single phase it drops to 830 W and 2.8 N·m at the same speed. Peak stall torque hits 11.3 N·m across the 115-480 V three-phase range, with a continuous stall torque of 2.94 N·m — the 3.8× peak-to-continuous ratio means it handles short acceleration bursts without oversizing the motor frame. Maximum Irms is 17.0 A; continuous stall current is 4.1 A. The 0.72 N·m/A torque constant at 120 °C hot copper gives a direct conversion for drive current limit settings. ## Encoder, feedback, and connection — what the drive needs to see Absolute single-turn Hiperface DSL encoder — no homing sequence needed at power-up; the drive reads position immediately. Single-turn means resolution covers one revolution; multi-turn would be needed for applications requiring absolute position over multiple rotations. Electrical connection is a quick-lock rotatable right-angled connector — the cable exit angle can be oriented after installation, useful when the motor is mounted in a tight cabinet corner or against a machine frame. ## Mechanical fit — flange, shaft, and sealing 70 mm flange (IEC standard) with a 60 mm centring collar and 2.5 mm collar depth. The 14 mm smooth shaft (no keyway) is 30 mm long — coupling selection must account for keyless transmission, typically a clamp-type or friction-lock hub. IP65 on both the motor body and the shaft bushing per IEC 60034-5 — the seal at the shaft exit is rated for hose-directed water, so this motor can be mounted in washdown zones or outdoors without a protective shroud. ## Thermal and electrical model for drive tuning Back EMF constant is 49 V/krpm at 20 °C; this sets the voltage ceiling at rated speed — a 480 V drive has headroom for field weakening if the application needs speed above 3000 rpm. Natural convection cooling — no fan. Continuous torque at low speed is limited by the winding temperature (hot copper 130 °C). In a stalled or creep-speed duty cycle, the 4.1 A continuous stall current is the thermal limit; above that, duty-cycle derating applies.","metaTitle":"Schneider Electric SH30703P0AA4100 Servo Motor, 1330 W","metaDescription":"Schneider Electric SH30703P0AA4100 servo motor, 1330 W continuous power, 3000 rpm nominal, absolute single-turn Hiperface DSL encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30703P0AA4100","Length":"8.7 in (220 mm)","Inertia":"0.0 kg.cm² of brake 0.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 70mm, 3 stacks, smooth Shaft, Singleturn DSL 18bit, no Brake, OneMotorCable angular M23, IP65/65","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"1.2 in (30 mm)","Holding brake":"Without","Nominal speed":"3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.580 kg.cm²","Nominal torque":"24.8 lbf.in (2.8 N.m) 230 V single phase 18.6 lbf.in (2.1 N.m) 400 V three phase 18.6 lbf.in (2.1 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"0.72 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1330 W","Mounting Support":"International standard flange","Sizing reference":"SH30703P","Back emf constant":"49 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"100.01 lbf.in (11.3 N.m) 115...480 V three phase","Stator inductance":"14.6 mH","Stator resistance":"2.7 Ohm","Maximum current Irms":"17.0 A","Nominal output power":"830 W 230 V single phase 1330 W 400 V three phase 1330 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"quicklock rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"160 N","Output current 3s peak":"17.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"1050 N 1000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"4.1 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,427.22","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/2b14da931c2a41645f31d0c4fdb2d823.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH30703P0AA4100/sh3-servomotor-70mm-3-stacks-smooth-shaft-singleturn-dsl-18bit-no-brake-onemotorcable-angular-m23-ip65-65/"},"ai":{"faq":[{"question":"What is the nominal power of SH30703P0AA4100 at 400 V three-phase?","answer":"1330 W continuous power at 400 V three-phase (same at 480 V). At 230 V single-phase supply it is 830 W."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30703P0AA4100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30703P0AA4100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}