{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30703P0BA4000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30703P0BA4000","canonicalUrl":"https://aoctrl.com/schneider/SH30703P0BA4000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30703P0BA4000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30703P0BA4000, SH3 series servo motor, three-phase, 1330 W continuous power, 6000 rpm nominal speed, absolute multiturn Hiperface DSL encoder, smooth shaft, without brake, IP65.","salesMarkdown":"## 1330 W continuous, 6000 rpm at 400 V three-phase The SH30703P0BA4000: Nominal torque is 18.6 lbf·in (2.1 N·m) at both 400 V and 480 V three-phase; at 230 V single-phase the motor delivers 830 W and 24.8 lbf·in (2.8 N·m) at 3000 rpm. The absolute multiturn Hiperface DSL encoder provides position feedback over a single-cable connection — no separate encoder cable needed, which simplifies wiring in multi-axis machines and reduces cabinet clutter. ## Mounting, shaft, and environmental ratings Mounting uses an international standard flange with a 70 mm (2.8 in) flange size and a 60 mm centring collar; the smooth shaft is 14 mm diameter by 30 mm long, suited for direct coupling to a load without keyway constraints. The motor body carries IP65 protection per IEC 60034-5, with the shaft bushing rated IP54 when the shaft seal ring is omitted — adequate for washdown environments when the mating connector is properly seated. Electrical connection is via a rotatable right-angled quick-lock connector, allowing the cable exit to be oriented in the field to fit tight cabinet layouts. ## Electrical and thermal parameters Continuous stall current is 4.1 A with a peak current of 17.0 A for 3 seconds; the torque constant is 0.72 N·m/A at 120 °C copper temperature, and the back EMF constant is 49 V/krpm at 20 °C.","metaTitle":"Schneider Electric SH30703P0BA4000 Servo Motor, 1330 W","metaDescription":"Schneider Electric SH30703P0BA4000 servo motor, 1330 W continuous power, 6000 rpm at 400 V three-phase, absolute multiturn Hiperface DSL encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30703P0BA4000","Length":"8.7 in (220 mm)","Inertia":"0.0 kg.cm² of brake 0.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 70mm, 3 stacks, smooth Shaft, Multiturn DSL 18bit, no Brake, OneMotorCable angular M23, IP54/65","Encoder type":"Absolute multiturn Hiperface DSL","Shaft length":"1.2 in (30 mm)","Holding brake":"Without","Nominal speed":"3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.580 kg.cm²","Nominal torque":"24.8 lbf.in (2.8 N.m) 230 V single phase 18.6 lbf.in (2.1 N.m) 400 V three phase 18.6 lbf.in (2.1 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"0.72 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1330 W","Mounting Support":"International standard flange","Sizing reference":"SH30703P","Back emf constant":"49 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"100.01 lbf.in (11.3 N.m) 115...480 V three phase","Stator inductance":"14.6 mH","Stator resistance":"2.7 Ohm","Maximum current Irms":"17.0 A","Nominal output power":"830 W 230 V single phase 1330 W 400 V three phase 1330 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"quicklock rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"160 N","Output current 3s peak":"17.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"1070 N 1000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"4.1 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn x 4096 turns","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,537.92","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/bd810179520348ed97c51a8be0318cb1.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30703P0BA4000/sh3-servomotor-70mm-3-stacks-smooth-shaft-multiturn-dsl-18bit-no-brake-onemotorcable-angular-m23-ip54-65/"},"ai":{"faq":[{"question":"How do I get current pricing and availability for SH30703P0BA4000?","answer":"Pricing and availability are confirmed at RFQ time against your BOM quantity; submit a quote request through the storefront."},{"question":"What is SH30703P0BA4000's listed phase and length?","answer":"It is a three-phase motor with a body length of 8.7 in (220 mm)."},{"question":"What compliance documentation does Schneider Electric provide for SH30703P0BA4000?","answer":"The motor carries IP65 protection per IEC 60034-5 and uses an international standard flange. RoHS, REACH, and UL documentation should be available from Schneider Electric upon request — no specific cert numbers are listed in the spec record."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30703P0BA4000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30703P0BA4000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}