{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30703P0BF4000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30703P0BF4000","canonicalUrl":"https://aoctrl.com/schneider/SH30703P0BF4000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30703P0BF4000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH30703P0BF4000, three-phase, 1330 W nominal output power at 400/480 V, 70 mm flange, smooth shaft, absolute multiturn Hiperface DSL encoder, IP65.","salesMarkdown":"The SH30703P0BF4000 is a three-phase servo motor from the SH3 family, built for the Lexium 32 drive series. The nominal speed and torque both shift with the supply voltage — at 400 V three-phase it delivers 6000 rpm and 2.1 N.m continuous torque; at 480 V three-phase it reaches 7200 rpm with the same 2.1 N.m torque. On a 230 V single-phase supply the nominal speed drops to 3000 rpm and torque rises to 2.8 N.m, so the motor can run on a lower-voltage line but the axis speed ceiling is lower. Continuous power is 1330 W at 400/480 V three-phase, and the peak stall torque of 11.3 N.m gives the axis short-term acceleration headroom above the 2.94 N.m continuous stall torque. The holding brake locks the load at 3 N.m when power is off — enough to hold a vertical axis or a stopped conveyor section without a separate mechanical brake. ## Encoder and feedback — single-cable architecture The absolute multiturn Hiperface DSL encoder sends position and commutation data over the same cable as motor power — no separate encoder cable needed. That simplifies the cable track and reduces the number of connector pins at the drive end. The rotatable right-angled connector with quicklock lets the cable exit point be oriented in the field, which helps when the motor is mounted in a tight corner of the machine frame. The motor flange is 70 mm (IEC standard), the shaft is smooth at 14 mm diameter with a 30 mm shaft length. A smooth shaft means the coupling or pulley must use a clamping hub or shrink disc — no keyway to transmit torque. The centring collar depth is 2.5 mm, so the pilot register is shallow; confirm the mating gearbox or load has a matching pilot bore depth. ## Environmental sealing and cooling The motor body is rated IP65 per IEC 60034-5, which means it handles washdown spray from any direction. The shaft bushing without the optional shaft seal ring drops to IP54 — if the motor is in a wet zone (food processing, washdown), fit the shaft seal ring to keep the IP65 rating at the shaft exit. Cooling is natural convection, so no external fan or forced air is needed; the motor relies on its own surface area and the machine frame to shed heat. The motor ships with the rotatable connector and the holding brake pre-installed. The package quantity is one unit. What ships in the carton is the motor with the brake and the connector — no separate gearbox, drive, or cable is included. The kit is complete for the motor itself; the mating drive (Lexium 32) and the motor cable are ordered separately.","metaTitle":"Schneider Electric SH30703P0BF4000 Servo Motor with Brake","metaDescription":"Schneider Electric SH30703P0BF4000 SH3 servo motor with brake, 1330 W at 400/480 V three-phase, absolute multiturn Hiperface DSL encoder, IP65, 70 mm flange.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30703P0BF4000","Length":"9.7 in (246 mm)","Inertia":"0.227 kg.cm² of brake 0.58 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 70mm, 3 stacks, smooth Shaft, Multiturn DSL 18bit, Brake, OneMotorCable angular M23, IP54/65","Encoder type":"Absolute multiturn Hiperface DSL","Shaft length":"1.2 in (30 mm)","Holding brake":"With","Nominal speed":"3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.807 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"24.8 lbf.in (2.8 N.m) 230 V single phase 18.6 lbf.in (2.1 N.m) 400 V three phase 18.6 lbf.in (2.1 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"0.72 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1330 W","Mounting Support":"International standard flange","Sizing reference":"SH30703P","Back emf constant":"49 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"100.01 lbf.in (11.3 N.m) 115...480 V three phase","Stator inductance":"7.3 mH","Stator resistance":"2.7 Ohm","Brake pull-in power":"7 W","Maximum current Irms":"17.0 A","Nominal output power":"830 W 230 V single phase 1330 W 400 V three phase 1330 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"quicklock rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"160 N","Output current 3s peak":"17.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"1070 N 1000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"4.1 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn x 4096 turns","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/3271511ddeacbee7376fcc81a8340d68.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30703P0BF4000/sh3-servomotor-70mm-3-stacks-smooth-shaft-multiturn-dsl-18bit-brake-onemotorcable-angular-m23-ip54-65/"},"ai":{"faq":[{"question":"What is SH30703P0BF4000's listed phase?","answer":"The motor is a three-phase servo motor. It can also run on a 230 V single-phase supply, but the nominal speed drops to 3000 rpm and the torque rises to 2.8 N.m."},{"question":"What encoder type does SH30703P0BF4000 use?","answer":"It uses an absolute multiturn Hiperface DSL encoder, which combines position and commutation data on the same cable as motor power — no separate encoder cable needed."},{"question":"What is the holding torque of the brake on SH30703P0BF4000?","answer":"The holding brake delivers 3 N.m (26.6 lbf.in) of holding torque, enough to lock a vertical axis or stopped load when power is off."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30703P0BF4000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30703P0BF4000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}