{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30703P11A2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30703P11A2100","canonicalUrl":"https://aoctrl.com/schneider/SH30703P11A2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30703P11A2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30703P11A2100 SH3 series servo motor, three-phase, 1330 W continuous power, 7200 rpm at 480 V, IP65, absolute single-turn SinCos Hiperface encoder, without brake.","salesMarkdown":"## Speed-torque curve depends on your supply voltage The SH30703P11A2100 is a three-phase servo motor from Schneider Electric's SH3 series, but its nominal speed and torque shift with the supply voltage you feed it. At 480 V three-phase it spins 7200 rpm; drop to 115 V single-phase and it runs 1500 rpm. The nominal torque follows the same pattern — 2.95 N.m at 115 V, 2.1 N.m at 480 V. That means the same motor body covers a wide speed range, but the torque you actually get depends on the drive and line voltage you pair it with. Continuous power is 1330 W, and peak stall torque hits 11.3 N.m for short-duration acceleration. The continuous stall torque is 2.94 N.m — that's the holding torque at zero speed. If your application needs a brake, note this variant ships without one; you'll need an external brake or a different order code. ## Encoder and feedback — absolute single-turn Hiperface The encoder is an absolute single-turn SinCos Hiperface type. That gives you position at power-up without a homing sequence, and the SinCos analog tracks allow high-resolution interpolation in the drive. The drive you pair it with must support Hiperface protocol — not all servo drives do, so check the drive's encoder input compatibility before wiring. Back EMF constant is 49 V/krpm at 20 °C. At 7200 rpm the back EMF reaches about 353 V line-to-line, which limits the maximum speed on a 400 V or 480 V DC bus — the drive needs headroom above the back EMF to inject current. Torque constant is 0.72 N.m/A at 120 °C hot winding, so sizing the drive current for your torque demand is straightforward. ## IP65 and mounting — washdown-ready, standard flange The motor body and shaft bushing are both rated IP65 per IEC 60034-5. That means it's sealed against dust ingress and low-pressure water jets — suitable for washdown environments in food processing or wet machining. The connector options include a straight connector and a rotatable right-angled connector, giving you cable exit flexibility in tight enclosures. Mounting is via an international standard flange with a 70 mm flange size and 60 mm centring collar. Overall length is 220 mm, shaft diameter 14 mm with a parallel key and 30 mm shaft length. The radial force limit is 730 N at 1000 rpm, derating to 400 N at 6000 rpm — bearing life depends on staying within that curve.","metaTitle":"Schneider Electric SH30703P11A2100 Servo Motor, 1330 W","metaDescription":"Schneider Electric SH30703P11A2100 servo motor, three-phase, 1330 W continuous power, 7200 rpm at 480 V, IP65, absolute encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30703P11A2100","Length":"8.7 in (220 mm)","Inertia":"0.0 kg.cm² of brake 0.58 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (5 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 70mm, 3 stacks, keyed Shaft, SinCos Singleturn 128, no Brake, angular, IP65/65","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.2 in (30 mm)","Holding brake":"Without","Nominal speed":"1500 rpm 115 V single phase 3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.58 kg.cm²","Nominal torque":"26.11 lbf.in (2.95 N.m) 115 V single phase 24.8 lbf.in (2.8 N.m) 230 V single phase 18.6 lbf.in (2.1 N.m) 400 V three phase 18.6 lbf.in (2.1 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"0.72 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1330 W","Mounting Support":"International standard flange","Sizing reference":"SH30703P","Back emf constant":"49 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"100.01 lbf.in (11.3 N.m) 115...480 V three phase","Stator inductance":"7.3 mH","Stator resistance":"2.7 Ohm","Maximum current Irms":"17.0 A","Nominal output power":"460 W 115 V single phase 880 W 230 V single phase 1450 W 400 V three phase 1550 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"80 N","Output current 3s peak":"17.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"4.1 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/2825597a935a26b2a5f76bcc4ab74edd.pdf","sourceUrl":"https://www.se.com/ca/en/product/SH30703P11A2100/sh3-servomotor-70mm-3-stacks-keyed-shaft-sincos-singleturn-128-no-brake-angular-ip65-65/"},"ai":{"faq":[{"question":"What is SH30703P11A2100's listed phase?","answer":"The motor is a three-phase design, but its speed and torque ratings vary depending on the supply voltage — from 115 V single-phase up to 480 V three-phase."},{"question":"What compliance documentation does Schneider Electric provide for SH30703P11A2100?","answer":"The motor carries an IP65 rating per IEC 60034-5. Specific RoHS, REACH, or UL documentation should be confirmed at quote time from the supplier."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30703P11A2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30703P11A2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}