{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30703P11F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30703P11F2200","canonicalUrl":"https://aoctrl.com/schneider/SH30703P11F2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH30703P11F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH30703P11F2200, 1.55 kW nominal output at 480 V three-phase, 6000 rpm, IP65/IP67, absolute single-turn SinCos Hiperface encoder, holding brake 3 N.m.","salesMarkdown":"## Speed and torque across the supply range The SH30703P11F2200: This SH3 servo motor delivers nominal torque of 2.1 N.m at both 400 V and 480 V three-phase, with nominal output power reaching 1.55 kW at 480 V. On single-phase supplies the torque derates to 2.8 N.m at 230 V and 2.95 N.m at 115 V, while nominal speed shifts from 6000 rpm (three-phase) down to 1500 rpm on 115 V single-phase — a critical constraint when the install site lacks three-phase power. The continuous power rating of 1330 W and continuous stall torque of 2.94 N.m across the 115–480 V three-phase range define the thermal steady-state capability for sizing the driven load without exceeding the natural convection cooling limit. ## Holding brake and encoder feedback Feedback comes from an absolute single-turn SinCos Hiperface encoder — this gives position at power-on without a homing sequence, critical for applications that must resume from the last commanded position after a power cycle. The single-turn resolution limits absolute position tracking to one revolution; multi-turn applications need a different encoder variant. ## Sealing and mechanical limits for the install environment IP65 on the motor body and shaft bushing, plus IP67 on the housing per IEC 60034-5, means the motor withstands hose-down cleaning and occasional submersion — suitable for food-and-beverage washdown zones or outdoor installations where the motor is not fully sheltered. Maximum radial force at the shaft is 730 N at 1000 rpm, derating to 400 N at 6000 rpm — the bearing life calculation must use the force at the application's operating speed, not the static maximum. Axial force is capped at 80 N, so direct-drive loads with thrust (helical gears, leadscrews) need a separate thrust bearing. ## Peak capability and electrical parameters Peak stall torque reaches 11.3 N.m at 115–480 V three-phase, with a corresponding peak current of 17.0 A for 3 seconds — this is the acceleration/deceleration ceiling before the drive trips on overcurrent. The stator resistance of 2.7 Ohm and inductance of 20.3 mH set the electrical time constant and influence the drive's current-loop tuning. The torque constant of 0.72 N.m/A at 120 °C copper temperature means the drive must supply roughly 4.1 A to produce the continuous stall torque of 2.94 N.m at hot operating temperature — a useful figure for sizing the drive's continuous current rating. ## Sourcing and lifecycle status The motor uses an international standard flange with a 70 mm flange size and 14 mm shaft diameter with a parallel key — this matches the IEC mounting footprint common across SH3 series frames, so a replacement or spare can slot into the same mechanical interface without re-machining the mounting plate.","metaTitle":"Schneider Electric SH30703P11F2200 Servo Motor with Brake","metaDescription":"Schneider Electric SH30703P11F2200 SH3 servo motor with holding brake, 1.55 kW at 480 V three-phase, IP65/IP67, absolute single-turn Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30703P11F2200","Length":"10 in (254 mm)","Inertia":"0.11 kg.cm² of brake 0.0 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (5 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 70mm, 3 stacks, keyed Shaft, SinCos Singleturn 128, Brake, angular, IP65/67","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.2 in (30 mm)","Holding brake":"With","Nominal speed":"1500 rpm 115 V single phase 3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.807 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"26.11 lbf.in (2.95 N.m) 115 V single phase 24.8 lbf.in (2.8 N.m) 230 V single phase 18.6 lbf.in (2.1 N.m) 400 V three phase 18.6 lbf.in (2.1 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"0.72 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1330 W","Mounting Support":"International standard flange","Sizing reference":"SH30703P","Back emf constant":"49 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"100.01 lbf.in (11.3 N.m) 115...480 V three phase","Stator inductance":"20.3 mH","Stator resistance":"2.7 Ohm","Maximum current Irms":"17.0 A","Nominal output power":"460 W 115 V single phase 880 W 230 V single phase 1450 W 400 V three phase 1550 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"80 N","Output current 3s peak":"17.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"4.1 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/033aa367f3f16ef555088a1d9048de5d.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30703P11F2200/sh3-servomotor-70mm-3-stacks-keyed-shaft-sincos-singleturn-128-brake-angular-ip65-67/"},"ai":{"faq":[{"question":"What is SH30703P11F2200's listed phase?","answer":"Three-phase — the motor is designed for three-phase supply, though it also operates on single-phase with derated torque and speed as shown in the speed/torque table."},{"question":"What encoder type does SH30703P11F2200 use?","answer":"Absolute single-turn SinCos Hiperface encoder — provides absolute position within one revolution at power-on, eliminating the need for a homing sequence."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30703P11F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30703P11F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}