{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30703P12F2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30703P12F2100","canonicalUrl":"https://aoctrl.com/schneider/SH30703P12F2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30703P12F2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor with brake, SH30703P12F2100, 1330 W continuous power, 3000 rpm at 230 V single-phase, 3 N.m holding brake, absolute multiturn SinCos Hiperface encoder, IP65.","salesMarkdown":"## Speed and torque across supply voltages The SH30703P12F2100: This motor delivers 1330 W continuous power, but the speed and torque curves shift with the supply. At 230 V single-phase, nominal speed is 3000 rpm with 24.8 lbf.in (2.8 N.m) nominal torque. On a 400 V three-phase line, speed climbs to 6000 rpm while torque drops to 18.6 lbf.in (2.1 N.m) — the same torque figure at 480 V three-phase at 7200 rpm. The holding brake is rated 26.6 lbf.in (3 N.m), sized to hold the load vertically without back-driving through the gearbox. ## Encoder and feedback — absolute multiturn SinCos Hiperface The encoder is an absolute multiturn SinCos Hiperface type. This gives position feedback over a single cable pair without a separate homing sequence after a power cycle — the drive knows the rotor angle and the number of turns from the moment the bus powers up. For a machine-tool axis or a pick-and-place gantry, that eliminates the reference-run time on every restart. ## Mounting and environmental sealing The motor uses an international standard flange with a 70 mm (2.8 in) flange size and a 14 mm shaft diameter with a parallel key. The rotatable right-angled connector lets you orient the cable exit on-site without opening the motor housing. ## Radial load limits and bearing life Maximum radial force Fr is speed-dependent: 730 N at 1000 rpm, dropping to 400 N at 6000 rpm. The maximum axial force Fa is 80 N. These are the bearing load limits — exceeding them shortens bearing life or causes shaft deflection that shows up as following error in the servo loop.","metaTitle":"Schneider Electric SH30703P12F2100 Servo Motor with Brake","metaDescription":"Schneider Electric SH30703P12F2100 servo motor with brake, 1330 W continuous power, 3000 rpm at 230 V single-phase. Absolute multiturn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30703P12F2100","Length":"10 in (254 mm)","Inertia":"0.11 kg.cm² of brake 0.0 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (5 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 70mm, 3 stacks, keyed Shaft, SinCos Multiturn 128, Brake, angular, IP65/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.2 in (30 mm)","Holding brake":"With","Nominal speed":"1500 rpm 115 V single phase 3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.807 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"26.11 lbf.in (2.95 N.m) 115 V single phase 24.8 lbf.in (2.8 N.m) 230 V single phase 18.6 lbf.in (2.1 N.m) 400 V three phase 18.6 lbf.in (2.1 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"0.72 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1330 W","Mounting Support":"International standard flange","Sizing reference":"SH30703P","Back emf constant":"49 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"100.01 lbf.in (11.3 N.m) 115...480 V three phase","Stator inductance":"20.3 mH","Stator resistance":"2.7 Ohm","Maximum current Irms":"17.0 A","Nominal output power":"460 W 115 V single phase 880 W 230 V single phase 1450 W 400 V three phase 1550 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"80 N","Output current 3s peak":"17.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"4.1 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,966.14","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/630e1d3fa9d0aaad473d3d70cfb9d674.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30703P12F2100/sh3-servomotor-70mm-3-stacks-keyed-shaft-sincos-multiturn-128-brake-angular-ip65-65/"},"ai":{"faq":[{"question":"Where can I buy SH30703P12F2100 and how do I get a price?","answer":"This servo motor is sourced through independent distribution channels."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30703P12F2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30703P12F2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}