{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30703P1AA3000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30703P1AA3000","canonicalUrl":"https://aoctrl.com/schneider/SH30703P1AA3000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30703P1AA3000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30703P1AA3000, 1330 W nominal output power at 400 V three-phase, 3000 rpm nominal speed, 2.8 Nm nominal torque, absolute single-turn Hiperface DSL encoder, IP65, without holding brake, parallel key shaft.","salesMarkdown":"## Active production — no obsolescence concern for this servo motor The SH30703P1AA3000 is listed as current production, meaning it remains in Schneider Electric's active catalog with no announced end-of-life or last-time-buy window. Procurement can proceed without the urgency of a phase-out timeline. Sourced through independent distribution channels; availability and volume pricing confirmed at RFQ against the BOM quantity. ## Torque and power delivery depend on supply voltage — match the drive Nominal output power is 830 W on 230 V single-phase supply, rising to 1330 W on both 400 V and 480 V three-phase supplies. The nominal torque follows the same pattern: 2.8 Nm at 230 V single-phase, 2.1 Nm at 400 V or 480 V three-phase. This means the motor's usable torque and power are set by the available line voltage, not the motor alone. Nominal speed is 3000 rpm at 230 V single-phase, 6000 rpm at 400 V three-phase, and 7200 rpm at 480 V three-phase. Maximum mechanical speed is 8000 rpm, so the 480 V configuration runs closest to the mechanical limit. ## Encoder choice locks controller compatibility — Hiperface DSL single-turn absolute The absolute single-turn Hiperface DSL encoder provides position feedback over a digital serial link, eliminating analog sin/cos signal degradation over cable length. This encoder protocol is specific to Schneider Electric's Lexium drive family and compatible third-party controllers that support Hiperface DSL. Single-turn means absolute position within one revolution; multi-turn applications require a different encoder variant. The torque constant is 0.72 Nm/A at 120 °C copper temperature, and the back EMF constant is 49 V/krpm at 20 °C. These values define the current-to-torque relationship and the voltage-speed ceiling for the drive's DC bus. ## No holding brake — plan for external brake or vertical-axis safety Continuous stall torque is 2.94 Nm across the 115–480 V three-phase range, with a continuous stall current of 4.1 A. Peak stall torque reaches 11.3 Nm, giving a 3.8× torque overload capability for acceleration bursts — useful for cycle-time reduction in pick-and-place or indexing moves. ## IP65 motor body, IP54 shaft bushing — washdown capable with a seal check The motor body is rated IP65 per IEC 60034-5, meaning it withstands dust ingress and low-pressure water jets from any direction. The shaft bushing without the shaft seal ring drops to IP54, which is dust-protected but only splash-resistant. For washdown environments, specify the shaft seal ring option to maintain full IP65 at the shaft exit. Cooling is by natural convection — no fan or forced air. The maximum copper temperature is 130 °C, and the stator resistance is 2.7 Ω with 14.6 mH inductance. These thermal parameters set the continuous current limit in the drive's thermal model. ## Mounting and shaft interface — standard flange, parallel key Mounting uses an international standard flange with a 70 mm flange size, 60 mm centring collar diameter, and 5.5 mm mounting hole diameter. The shaft is 14 mm diameter with a 30 mm shaft length and a parallel key (5 mm key width). These dimensions match the IEC standard frame for direct coupling to gearboxes or pulleys without adapter plates. Maximum radial force is 1050 N at 1000 rpm, and maximum axial force is 160 N. These bearing load limits must be respected when selecting pulleys or belt drives to avoid premature bearing failure.","metaTitle":"Schneider Electric SH30703P1AA3000 Servo Motor, 1330 W","metaDescription":"Schneider Electric SH30703P1AA3000 servo motor, 1330 W nominal output at 400 V three-phase, 2.8 Nm nominal torque, absolute single-turn Hiperface DSL encoder","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.7 in (220 mm)","Category":"US1PC5218359","Key width":"0.2 in (5 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"1.2 in (30 mm)","Holding brake":"Without","Nominal speed":"3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.580 kg.cm²","Nominal torque":"24.8 lbf.in (2.8 N.m) 230 V single phase 18.6 lbf.in (2.1 N.m) 400 V three phase 18.6 lbf.in (2.1 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"0.72 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1330 W","Mounting Support":"International standard flange","Sizing reference":"SH30703P","Back emf constant":"49 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"100.01 lbf.in (11.3 N.m) 115...480 V three phase","Stator inductance":"14.6 mH","Stator resistance":"2.7 Ohm","Maximum current Irms":"17 A","Nominal output power":"830 W 230 V single phase 1330 W 400 V three phase 1330 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"160 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"1050 N 1000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"4.1 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/b85571f60c60952746f7cb37d8174b13.pdf","sourceUrl":"https://www.se.com/us/en/product/SH30703P1AA3000/sh3-omc-motor-70mm-3-st-ip65-54-keyed-sh-dsl-single-turn-str-conn-m23/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30703P1AA3000/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30703P1AA3000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30703P1AA3000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}