{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30703P1AA3100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30703P1AA3100","canonicalUrl":"https://aoctrl.com/schneider/SH30703P1AA3100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30703P1AA3100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30703P1AA3100 SH3 series servo motor, three-phase, 1.33 kW, 2.8 Nm continuous torque, 3000 rpm, absolute single-turn Hiperface DSL encoder, IP65, without holding brake.","salesMarkdown":"## 1.33 kW at 3000 rpm — the ratings that decide the fit The SH30703P1AA3100: On a 230 V single-phase line the output drops to 830 W and torque goes up to 2.8 Nm — the winding is tapped for both supply configurations, so the BOM voltage determines which torque curve applies. The absolute single-turn Hiperface DSL encoder gives you position feedback over a single cable — no separate feedback line to pull and terminate. That saves a cable tray slot and a connector pair at the drive end, which matters when you are stuffing ten axes into a cabinet. ## Peak torque and mechanical limits Peak stall torque hits 11.3 Nm across the 115–480 V three-phase range, so the motor can muscle through a short-duration load spike without losing position. Continuous stall torque is 2.94 Nm at 4.1 A continuous stall current — that is the holding torque at standstill with the drive still enabled. Stator resistance is 2.7 Ω, inductance 14.6 mH — these set the electrical time constant and influence the drive's current-loop tuning. The torque constant is 0.72 Nm/A at 120 °C copper temperature, so expect a slight drop from the cold value during sustained operation. ## Mounting, IP rating, and connector Flange size is 70 mm (2.8 in) with an international standard flange pattern — bolts through 5.5 mm holes on the standard bolt circle. The centring collar is 60 mm diameter, 2.5 mm deep, so the pilot register is shallow; make sure the mating bore is concentric within 0.05 mm to avoid bearing preload. IP65 rating on both the motor body and the shaft bushing per IEC 60034-5 — the seal at the shaft exit is the same class as the housing, so washdown spray at the coupling end won't ingress. The electrical connection is a quick-lock straight connector, not a terminal box, so plan the cable exit direction before bolting the motor down. Overall length is 220 mm (8.7 in), shaft diameter 14 mm with a parallel key and 30 mm shaft length. Maximum radial force is 1050 N at 1000 rpm, maximum axial force 160 N — belt-drive applications need a radial load check against the bearing rating at the actual operating speed.","metaTitle":"Schneider Electric SH30703P1AA3100 Servo Motor, 1.33 kW","metaDescription":"Schneider Electric SH30703P1AA3100 servo motor, 1.33 kW, 2.8 Nm continuous torque, 3000 rpm, absolute single-turn Hiperface DSL encoder, IP65, current","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30703P1AA3100","Length":"8.7 in (220 mm)","Category":"US1PC5218359","Key width":"0.2 in (5 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 70mm, 3 stacks, keyed Shaft, Singleturn DSL 18bit, no Brake, OneMotorCable straight M23, IP65/65","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"1.2 in (30 mm)","Holding brake":"Without","Nominal speed":"3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.580 kg.cm²","Nominal torque":"24.8 lbf.in (2.8 N.m) 230 V single phase 18.6 lbf.in (2.1 N.m) 400 V three phase 18.6 lbf.in (2.1 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"0.72 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1330 W","Mounting Support":"International standard flange","Sizing reference":"SH30703P","Back emf constant":"49 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"100.01 lbf.in (11.3 N.m) 115...480 V three phase","Stator inductance":"14.6 mH","Stator resistance":"2.7 Ohm","Maximum current Irms":"17 A","Nominal output power":"830 W 230 V single phase 1330 W 400 V three phase 1330 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"160 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"1050 N 1000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"4.1 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e5c7151d60972ef2e7a3d3fc3f9b0e90.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30703P1AA3100/sh3-servomotor-70mm-3-stacks-keyed-shaft-singleturn-dsl-18bit-no-brake-onemotorcable-straight-m23-ip65-65/"},"ai":{"faq":[{"question":"What is the encoder type on SH30703P1AA3100?","answer":"Absolute single-turn Hiperface DSL encoder — position feedback over a single cable, no separate feedback line required."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30703P1AA3100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30703P1AA3100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}