{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30703P1AA4000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30703P1AA4000","canonicalUrl":"https://aoctrl.com/schneider/SH30703P1AA4000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30703P1AA4000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30703P1AA4000 SH3 servo motor, 1330 W continuous power, 3000 rpm nominal speed, 2.8 N.m nominal torque, absolute single-turn Hiperface DSL encoder, IP65, 70 mm flange.","salesMarkdown":"## Active production — SH30703P1AA4000 lifecycle and procurement No stock-holding claim is made; availability is verified at quote time. ## Speed-torque envelope across three supply voltages Nominal speed reaches 3000 rpm on 230 V single-phase input, 6000 rpm on 400 V three-phase, and 7200 rpm on 480 V three-phase — the motor's speed ceiling is supply-dependent, not a fixed nameplate number. Nominal torque is 2.8 N.m at 230 V single-phase, dropping to 2.1 N.m on both 400 V and 480 V three-phase supplies. Continuous power output is 830 W on single-phase and 1330 W on either three-phase supply. Peak stall torque reaches 11.3 N.m across the 115...480 V three-phase range, with a 3-second peak current of 17.0 A. Continuous stall torque is 2.94 N.m over the same voltage window. ## Encoder feedback and environmental sealing The absolute single-turn Hiperface DSL encoder provides position feedback over a digital serial link — no separate battery backup needed for single-turn position retention. This protocol is standard across Schneider's Lexium drive family. IP65 rating on the motor body per IEC 60034-5 means the winding and encoder survive washdown spray. The shaft bushing without shaft seal ring is only IP54 — if the application sees pressurized water on the shaft end, an external seal or seal ring variant is required. Natural convection cooling — no external fan or forced air required. The thermal limit is set by the copper hot-spot temperature of 130 °C. ## Mounting dimensions and mechanical interface International standard flange, 70 mm square, with a 60 mm centring collar and 5.5 mm mounting holes — fits the common 70 mm flange pattern found on servo mounts. Centring collar depth is 2.5 mm. Shaft diameter is 14 mm with a parallel key, key width 5 mm, shaft length 30 mm. Overall motor length is 220 mm. ## Winding parameters and drive tuning constants Stator resistance is 2.7 Ω, stator inductance 14.6 mH — these set the electrical time constant and influence current-loop tuning in the drive. Torque constant is 0.72 N.m/A at 120 °C winding temperature; back-EMF constant is 49 V/krpm at 20 °C. These values are temperature-dependent and should be entered into the drive's motor model for accurate torque estimation. Electrical connection uses a quick-lock rotatable right-angled connector — field wiring orientation can be adjusted without disassembling the motor connector body.","metaTitle":"Schneider Electric SH30703P1AA4000 Servo Motor, 1330 W","metaDescription":"Schneider Electric SH30703P1AA4000 SH3 servo motor, 1330 W continuous power, 3000 rpm nominal speed, absolute single-turn Hiperface DSL encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30703P1AA4000","Length":"8.7 in (220 mm)","Inertia":"0.0 kg.cm² of brake 0.0 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (5 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 70mm, 3 stacks, keyed Shaft, Singleturn DSL 18bit, no Brake, OneMotorCable angular M23, IP54/65","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"1.2 in (30 mm)","Holding brake":"Without","Nominal speed":"3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.580 kg.cm²","Nominal torque":"24.8 lbf.in (2.8 N.m) 230 V single phase 18.6 lbf.in (2.1 N.m) 400 V three phase 18.6 lbf.in (2.1 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"0.72 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1330 W","Mounting Support":"International standard flange","Sizing reference":"SH30703P","Back emf constant":"49 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"100.01 lbf.in (11.3 N.m) 115...480 V three phase","Stator inductance":"14.6 mH","Stator resistance":"2.7 Ohm","Maximum current Irms":"17.0 A","Nominal output power":"830 W 230 V single phase 1330 W 400 V three phase 1330 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"quicklock rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"160 N","Output current 3s peak":"17.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"1050 N 1000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"4.1 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,323.54","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/ac612a1c2b1a99b01247ed6351730401.pdf","sourceUrl":"https://www.se.com/us/en/product/SH30703P1AA4000/sh3-servomotor-70mm-3-stacks-keyed-shaft-singleturn-dsl-18bit-no-brake-onemotorcable-angular-m23-ip54-65/"},"ai":{"faq":[{"question":"What is the nominal torque of SH30703P1AA4000 at 400 V three-phase?","answer":"Nominal torque is 2.1 N.m at 400 V three-phase supply, with a continuous power output of 1330 W. At 230 V single-phase the torque rises to 2.8 N.m but power drops to 830 W."},{"question":"What encoder type does SH30703P1AA4000 use?","answer":"Absolute single-turn Hiperface DSL — a digital serial-link encoder that provides position feedback without a battery. Compatible with Schneider Lexium drives that support the Hiperface DSL protocol."},{"question":"What is the IP rating of SH30703P1AA4000?","answer":"IP65 on the motor body per IEC 60034-5, with IP54 at the shaft bushing when no shaft seal ring is fitted. The motor withstands washdown spray but the shaft entry point is less sealed."},{"question":"How do I get pricing and availability for SH30703P1AA4000?","answer":"Availability is verified through independent distribution channels at quote time — no stock-holding claim is made on this page."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30703P1AA4000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30703P1AA4000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}