{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30703P1BA3000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30703P1BA3000","canonicalUrl":"https://aoctrl.com/schneider/SH30703P1BA3000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30703P1BA3000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor, SH30703P1BA3000, 1330 W continuous power, 3000 rpm nominal, absolute multiturn Hiperface DSL encoder, IP65, 70 mm flange, without holding brake.","salesMarkdown":"## Nominal speed and torque across supply voltages The SH30703P1BA3000: This SH3 frame motor delivers 3000 rpm nominal on 230 V single-phase supply, but jumps to 6000 rpm on 400 V three-phase and 7200 rpm on 480 V three-phase — so the speed you get depends entirely on the line voltage you feed it. Nominal torque follows the same pattern: 2.8 N·m at 230 V single-phase, dropping to 2.1 N·m at both 400 V and 480 V three-phase. That means if you're running it on a three-phase line, you lose about 25 % of the low-voltage torque — plan your load accordingly. Continuous power is 1330 W on three-phase supplies (400 V or 480 V), but only 830 W on 230 V single-phase. The motor is naturally convection-cooled, so no fan to fail, but the thermal budget is set by the winding temperature limit of 130 °C. ## Encoder and feedback — absolute multitouch Hiperface DSL The built-in absolute multiturn Hiperface DSL encoder gives you position feedback without needing a battery backup or a home cycle on power-up. That's a real time-saver during commissioning — you power the drive, it knows where the axis is. The torque constant is 0.72 N·m/A at 120 °C copper temperature, and the back EMF constant is 49 V/krpm at 20 °C. These numbers let you size the drive's current loop and predict the bus voltage needed to reach top speed without saturating the drive. ## Stall torque and current — what the motor can hold Continuous stall torque is 2.94 N·m across the 115–480 V three-phase range, with a continuous stall current of 4.1 A. That's the torque the motor can hold indefinitely without overheating — useful for clamping or holding applications. ## Mounting and environmental sealing The motor uses an international standard flange with a 70 mm flange size and a 60 mm centring collar. The shaft is 14 mm diameter with a parallel key, and the overall length is 220 mm — fits the standard SH3 frame envelope. IP65 on the motor body per IEC 60034-5 means it handles washdown and dust — but the shaft bushing without a shaft seal ring is only IP54, so if you're in a wet environment, you'll want the optional shaft seal to keep water out of the bearing area. The electrical connection uses a rotatable right-angled connector and a quicklock straight connector — both are field-rotatable, which helps when the cable exit direction needs to change without a custom cable.","metaTitle":"Schneider Electric SH30703P1BA3000 Servo Motor, 1330 W","metaDescription":"Schneider Electric SH30703P1BA3000 SH3 servo motor with brake, 1330 W continuous power, 3000 rpm nominal speed, absolute multiturn Hiperface DSL encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.7 in (220 mm)","Category":"US1PC5218359","Key width":"0.2 in (5 mm)","Shaft end":"Parallel key","Encoder type":"Absolute multiturn Hiperface DSL","Shaft length":"1.2 in (30 mm)","Holding brake":"Without","Nominal speed":"3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.580 kg.cm²","Nominal torque":"24.8 lbf.in (2.8 N.m) 230 V single phase 18.6 lbf.in (2.1 N.m) 400 V three phase 18.6 lbf.in (2.1 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"0.72 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1330 W","Mounting Support":"International standard flange","Sizing reference":"SH30703P","Back emf constant":"49 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"100.01 lbf.in (11.3 N.m) 115...480 V three phase","Stator inductance":"14.6 mH","Stator resistance":"2.7 Ohm","Maximum current Irms":"17 A","Nominal output power":"830 W 230 V single phase 1330 W 400 V three phase 1330 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"160 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"1070 N 1000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"4.1 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn x 4096 turns","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/108e60e4d53dd085dab09cb58082a208.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30703P1BA3000/sh3-servomotor-70mm-3-stacks-keyed-shaft-multiturn-dsl-18bit-no-brake-onemotorcable-straight-m23-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30703P1BA3000/alternatives.json"},"ai":{"faq":[{"question":"How do I get current pricing and availability for SH30703P1BA3000?","answer":"Submit an RFQ against your BOM quantity. We source this active part through independent distribution and confirm availability and current pricing at quote time."},{"question":"What is SH30703P1BA3000's listed phase?","answer":"It is a three-phase motor, but it also runs on 230 V single-phase with reduced torque and speed — see the nominal speed and torque values across supply voltages in the specs above."},{"question":"What compliance documentation does Schneider Electric provide for SH30703P1BA3000?","answer":"The motor is designed to IEC 60034-5 for IP rating and carries the standard Schneider Electric declarations of conformity. Specific RoHS, REACH, and UL documentation should be requested at RFQ time to match your site's compliance requirements."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30703P1BA3000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30703P1BA3000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}