{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30703P1BA3100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30703P1BA3100","canonicalUrl":"https://aoctrl.com/schneider/SH30703P1BA3100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30703P1BA3100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30703P1BA3100, three-phase, 1330 W continuous power, 6000 rpm nominal speed at 400 V, absolute multiturn Hiperface DSL encoder, IP65, without brake.","salesMarkdown":"## Voltage-dependent speed and torque — the supply dictates the performance The SH30703P1BA3100: This SH3 servo motor delivers 3000 rpm nominal at 230 V single-phase, 6000 rpm at 400 V three-phase, and 7200 rpm at 480 V three-phase. The nominal torque shifts with the supply too: 2.8 N.m at 230 V single-phase, dropping to 2.1 N.m at 400 V or 480 V three-phase. The continuous power follows the same pattern — 830 W on single-phase, 1330 W on three-phase. If the line voltage at the cabinet is 400 V three-phase, the motor is a 6000 rpm / 1330 W machine; if the site only has 230 V single-phase, it is a 3000 rpm / 830 W machine. That is the first decision point for the BOM. The peak stall torque is 11.3 N.m across the 115-480 V three-phase range, giving a short-term overload ratio of about 5.4× the continuous torque — enough for aggressive acceleration profiles in indexing or pick-and-place. The continuous stall current is 4.1 A, and the maximum RMS current is 17 A, so the drive must be sized to deliver that peak without tripping. ## Encoder and feedback — single-cable absolute multiturn The encoder is an absolute multiturn Hiperface DSL type. That means position is known at power-up without a homing move, and the feedback runs over the motor power cable — no separate encoder cable needed. The electrical connection is a quicklock straight connector, so the cable assembly snaps in without tools. For the commissioning engineer, this simplifies the cable tray: one hybrid cable per axis instead of two. ## IP65 and mechanical interface — washdown-ready, standard flange Both the motor body and the shaft bushing are rated IP65 per IEC 60034-5. That means the motor withstands hose-down cleaning — suitable for food-and-beverage lines, washdown stations, or outdoor installations where the motor is not under a canopy. The flange size is 70 mm with a 60 mm centring collar and 2.5 mm collar depth. The shaft is 14 mm diameter with a parallel key, 30 mm shaft length. The mounting holes are 5.5 mm diameter on the flange. These dimensions match the standard IEC 72-1 flange pattern, so the motor bolts onto most gearboxes and linear actuators without an adapter plate.","metaTitle":"Schneider Electric SH30703P1BA3100 Servo Motor, 1330 W","metaDescription":"Schneider Electric SH30703P1BA3100 SH3 servo motor, 1330 W continuous power, 6000 rpm at 400 V three-phase, absolute multiturn Hiperface DSL encoder, IP65","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30703P1BA3100","Length":"8.7 in (220 mm)","Category":"US1PC5218359","Key width":"0.2 in (5 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 70mm, 3 stacks, keyed Shaft, Multiturn DSL 18bit, no Brake, OneMotorCable straight M23, IP65/65","Encoder type":"Absolute multiturn Hiperface DSL","Shaft length":"1.2 in (30 mm)","Holding brake":"Without","Nominal speed":"3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.580 kg.cm²","Nominal torque":"24.8 lbf.in (2.8 N.m) 230 V single phase 18.6 lbf.in (2.1 N.m) 400 V three phase 18.6 lbf.in (2.1 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"0.72 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1330 W","Mounting Support":"International standard flange","Sizing reference":"SH30703P","Back emf constant":"49 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"100.01 lbf.in (11.3 N.m) 115...480 V three phase","Stator inductance":"14.6 mH","Stator resistance":"2.7 Ohm","Maximum current Irms":"17 A","Nominal output power":"830 W 230 V single phase 1330 W 400 V three phase 1330 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"160 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"1070 N 1000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"4.1 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn x 4096 turns","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/fd327e12e281f806607ee572a7755f52.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30703P1BA3100/sh3-servomotor-70mm-3-stacks-keyed-shaft-multiturn-dsl-18bit-no-brake-onemotorcable-straight-m23-ip65-65/"},"ai":{"faq":[{"question":"What is the nominal speed of SH30703P1BA3100 at 400 V three-phase?","answer":"At 400 V three-phase, the nominal speed is 6000 rpm. At 480 V three-phase it reaches 7200 rpm, and at 230 V single-phase it is 3000 rpm."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30703P1BA3100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30703P1BA3100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}