{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31001M01A2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31001M01A2000","canonicalUrl":"https://aoctrl.com/schneider/SH31001M01A2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH31001M01A2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor, SH31001M01A2000, 660 W continuous power, 3000 rpm at 480 V three-phase, 2.8 Nm nominal torque, absolute single-turn SinCos Hiperface encoder, IP54 shaft bushing / IP65 motor, smooth shaft, 100 mm flange.","salesMarkdown":"## Voltage-dependent performance — the supply decides the speed and torque The SH31001M01A2000 is a three-phase servo motor, but its nominal speed and torque shift dramatically with the supply voltage. At 480 V three-phase it delivers 3000 rpm and 22.30 lbf·in (2.52 N·m); at 115 V single-phase that drops to 625 rpm and 24.8 lbf·in (2.8 N·m). The nominal output power follows the same pattern — 930 W at 480 V three-phase, 210 W at 115 V single-phase. The continuous power rating of 660 W is the thermal limit of the winding; the actual shaft power available depends on what voltage the drive puts on the terminals. ## Encoder feedback and drive compatibility The motor carries an absolute single-turn SinCos Hiperface encoder. That means the feedback protocol is Hiperface — the drive must support SinCos Hiperface to read position and speed. Single-turn gives absolute position within one revolution; after a power cycle the drive knows the shaft angle but not how many turns have passed. The rotatable right-angled connector lets the cable exit in any of four directions, which helps when the motor is shoehorned into a tight axis. ## IP rating depends on the shaft seal fitted The motor body is rated IP65 per IEC 60034-5, but the shaft bushing is IP54 without the optional shaft seal ring. If the application sees washdown or coolant spray, the shaft seal ring must be specified separately — the IP65 rating on the body doesn't extend through the shaft opening without it. Natural convection cooling means no fan to clog, but the thermal budget relies on free air movement around the flange.","metaTitle":"Schneider Electric SH31001M01A2000 Servo Motor, 660 W","metaDescription":"Schneider Electric SH31001M01A2000 SH3 servo motor, 660 W continuous power, 3000 rpm at 480 V three-phase. Absolute single-turn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"6.6 in (168.5 mm)","Key width":"0.2 in (6 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"625 rpm 115 V single phase 1250 rpm 230 V single phase 2500 rpm 400 V three phase 3000 rpm 480 V three phase","Rotor inertia":"1.4 kg.cm²","Nominal torque":"24.8 lbf.in (2.8 N.m) 115 V single phase 23.99 lbf.in (2.71 N.m) 230 V single phase 22.30 lbf.in (2.52 N.m) 400 V three phase 22.30 lbf.in (2.52 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.63 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"660 W","Mounting Support":"International standard flange","Sizing reference":"SH31001M","Back emf constant":"115 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"85.0 lbf.in (9.6 N.m) 115...480 V three phase","Stator inductance":"99.15 mH","Stator resistance":"13.9 Ohm","Maximum current Irms":"6.3 A","Nominal output power":"210 W 115 V single phase 410 W 230 V single phase 790 W 400 V three phase 930 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm 570 N 4000 rpm 530 N 5000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"1.8 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/3efd7addba72bf7bb5b95412c3d3d23b.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH31001M01A2000/sh3-servomotor-100mm-1-stack-high-torque-smooth-shaft-sincos-singleturn-128-no-brake-angular-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31001M01A2000/alternatives.json"},"ai":{"faq":[{"question":"What is the nominal speed of SH31001M01A2000 at 480 V three-phase?","answer":"At 480 V three-phase the nominal speed is 3000 rpm. At 400 V three-phase it is 2500 rpm, at 230 V single-phase 1250 rpm, and at 115 V single-phase 625 rpm."},{"question":"What encoder type does SH31001M01A2000 use?","answer":"It uses an absolute single-turn SinCos Hiperface encoder. The drive must support Hiperface protocol. Single-turn means absolute position within one revolution; multi-turn position is not available from this encoder."},{"question":"Does SH31001M01A2000 include a holding brake?","answer":"No. The holding brake is listed as 'without'. The load must be held by the drive's holding torque at standstill or by an externally mounted brake."},{"question":"How can I order SH31001M01A2000 or check availability?","answer":"Submit an RFQ for the required quantity and delivery timeline."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31001M01A2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31001M01A2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}