{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31001M01A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31001M01A2200","canonicalUrl":"https://aoctrl.com/schneider/SH31001M01A2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31001M01A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31001M01A2200, 660 W continuous power, 3000 rpm at 480 V three-phase, absolute single-turn SinCos Hiperface encoder, IP65/IP67, smooth shaft, without holding brake.","salesMarkdown":"## Speed-torque envelope by supply voltage The SH31001M01A2200 delivers 625 rpm on 115 V single-phase supply, 1250 rpm on 230 V single-phase, 2500 rpm on 400 V three-phase, and 3000 rpm on 480 V three-phase — the speed ceiling shifts with the available line voltage, so the drive's DC bus voltage sets the actual top speed in the application. Nominal torque tracks inversely with speed: 2.8 N.m at 115 V single-phase, 2.71 N.m at 230 V single-phase, and 2.52 N.m at both 400 V and 480 V three-phase. The torque drop between single-phase and three-phase supply is about 10 %, which matters when sizing for a constant-torque load like a conveyor running on a single-phase installation. Peak stall torque is 9.6 N.m across the 115...480 V three-phase range — this is the short-duration overload capability for acceleration or overcoming static friction, not the continuous rating. ## Encoder feedback and environmental sealing The absolute single-turn SinCos Hiperface encoder provides position feedback without requiring a homing sequence on power-up — the drive reads the absolute position within one revolution at startup. This eliminates the time and mechanical wear of a reference run on each power cycle. IP65 on the motor body and shaft bushing, IP67 on the housing per IEC 60034-5 — the motor withstands washdown and airborne dust ingress. The IP67 housing rating means the connector area is sealed against temporary immersion, suitable for food-and-bev or washdown zones where the motor sees direct spray. No holding brake is fitted — the motor relies on the drive's DC injection braking or an external mechanical brake for holding torque at zero speed. The continuous stall torque of 2.94 N.m is the electromagnetic holding torque available without a brake, but it requires the drive to remain powered. ## Mechanical interface and mounting International standard flange, 100 mm flange size, centring collar 95 mm diameter with 3.5 mm depth — mounts to standard ISO 100 mm motor flanges. Four 9.0 mm mounting holes on the flange pattern. Smooth shaft, 19 mm diameter, 40 mm shaft length, 6 mm keyway width — the smooth shaft accepts a keyed coupling or a clamping hub; the keyway is cut but no key is supplied. Maximum radial force is 900 N at 1000 rpm, derating to 530 N at 5000 rpm — this sets the allowable belt tension or coupling misalignment load. Electrical connection via a rotatable right-angled connector — the connector body can be oriented to route the cable away from the load or into a cable tray. Straight connector also listed for axial cable exit. ## Electrical parameters and thermal limits Stator resistance 13.9 Ω, stator inductance 99.15 mH — these are the winding parameters the drive's autotune routine uses to set current-loop gains. The torque constant is 1.63 N.m/A at 120 °C copper temperature; the back EMF constant is 115 V/krpm at 20 °C. Natural convection cooling — no external fan; the motor relies on surface area and the machine's own airflow. The copper hot-spot temperature is 130 °C; the continuous power rating of 660 W assumes this temperature rise at the nominal speed-torque point. ## Sourcing and lifecycle status The sizing reference SH31001M groups this motor with its matching drive and cable sets in the Schneider selection tool.","metaTitle":"Schneider Electric SH31001M01A2200 Servo Motor, 660 W","metaDescription":"Schneider Electric SH31001M01A2200 SH3 servo motor, 660 W continuous power, 3000 rpm at 480 V three-phase, absolute single-turn Hiperface encoder, IP65/IP67.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"6.6 in (168.5 mm)","Key width":"0.2 in (6 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"625 rpm 115 V single phase 1250 rpm 230 V single phase 2500 rpm 400 V three phase 3000 rpm 480 V three phase","Rotor inertia":"1.4 kg.cm²","Nominal torque":"24.8 lbf.in (2.8 N.m) 115 V single phase 23.99 lbf.in (2.71 N.m) 230 V single phase 22.30 lbf.in (2.52 N.m) 400 V three phase 22.30 lbf.in (2.52 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.63 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"660 W","Mounting Support":"International standard flange","Sizing reference":"SH31001M","Back emf constant":"115 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"85.0 lbf.in (9.6 N.m) 115...480 V three phase","Stator inductance":"99.15 mH","Stator resistance":"13.9 Ohm","Maximum current Irms":"6.3 A","Nominal output power":"210 W 115 V single phase 410 W 230 V single phase 790 W 400 V three phase 930 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm 570 N 4000 rpm 530 N 5000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"1.8 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e45566390b10d8f1ee4e6e40b98b544a.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH31001M01A2200/sh3-servomotor-100mm-1-stack-high-torque-smooth-shaft-sincos-singleturn-128-no-brake-angular-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31001M01A2200/alternatives.json"},"ai":{"faq":[{"question":"What is the speed of SH31001M01A2200 on a 480 V three-phase supply?","answer":"3000 rpm nominal at 480 V three-phase. The maximum mechanical speed is 6000 rpm, providing overspeed margin above the rated point."},{"question":"Does SH31001M01A2200 include a holding brake?","answer":"No holding brake is fitted. The motor relies on the drive's DC injection braking or an external mechanical brake for holding torque at zero speed. The continuous stall torque of 2.94 N.m provides electromagnetic holding if the drive remains powered."},{"question":"What encoder type does SH31001M01A2200 use?","answer":"Absolute single-turn SinCos Hiperface encoder — provides absolute position within one revolution, eliminating the need for a homing sequence on power-up."},{"question":"What is the IP rating of SH31001M01A2200?","answer":"IP65 on the motor body and shaft bushing, IP67 on the housing per IEC 60034-5 — suitable for washdown and dusty environments."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31001M01A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31001M01A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}