{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31001M01F1100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31001M01F1100","canonicalUrl":"https://aoctrl.com/schneider/SH31001M01F1100","factsUrl":"https://aoctrl.com/api/mcp/products/SH31001M01F1100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH31001M01F1100 servo motor with brake, SH3 series, 660 W continuous power, 9 Nm holding torque, IP65, absolute single-turn SinCos Hiperface encoder, 100 mm flange.","salesMarkdown":"## Speed-torque envelope and supply voltage dependency The SH31001M01F1100 is a three-phase servo motor with an integrated holding brake, delivering a nominal speed that shifts with the supply: 625 rpm at 115 V single-phase, 1250 rpm at 230 V single-phase, 2500 rpm at 400 V three-phase, and 3000 rpm at 480 V three-phase. This means the same motor covers both low-speed high-torque and high-speed applications depending on the drive input — a single BOM line for multiple line voltages if the drive is configured accordingly. Nominal torque also derates with voltage: 2.8 N·m at 115 V single-phase, 2.71 N·m at 230 V single-phase, and 2.52 N·m at both 400 V and 480 V three-phase. The continuous stall torque is 2.94 N·m across the three-phase range, while peak stall torque reaches 9.6 N·m for short-duration acceleration or overcoming static friction. Continuous power output is 660 W, with nominal output power varying from 210 W at 115 V single-phase up to 930 W at 480 V three-phase. The motor uses natural convection cooling, so no forced-air clearance is needed in the cabinet — useful for compact panel layouts. ## Holding brake and safety-critical vertical-axis loads The integrated holding brake delivers 9 N·m of holding torque, which is the parameter that governs whether this motor can safely hold a vertical-axis load at rest without drifting. For a Z-axis or gravity-loaded application, the brake torque must exceed the load torque by the safety margin specified in the machine directive — typically 1.5× to 2×. The brake is included as standard, eliminating the need for an external brake resistor or mechanical lock. ## Encoder feedback and IP rating for washdown environments The encoder is an absolute single-turn SinCos Hiperface type, which provides position feedback at power-up without a homing cycle — critical for applications where the machine must resume operation after a power loss without re-referencing. The single-turn resolution is sufficient for applications that do not require multi-turn absolute position tracking. Both the motor body and the shaft bushing are rated IP65 per IEC 60034-5, meaning they withstand hose-directed water and dust ingress. This makes the motor suitable for food-and-beverage washdown lines or outdoor installations where the motor is exposed to rain or cleaning sprays — no additional enclosure needed for the motor itself. ## Mechanical interface and mounting dimensions The motor uses an international standard flange with a 100 mm flange size and a 95 mm centring collar diameter. The shaft is 19 mm diameter, 40 mm long, with a 6 mm keyway, and the shaft end is smooth — no threaded hole or special feature. Mounting holes are 9 mm diameter on a 3.7 in (95 mm) centring collar, with a centring collar depth of 3.5 mm. Overall length is 199.5 mm (7.9 in). The electrical connection is a straight connector — no right-angle or rotatable option, so plan the cable exit path accordingly in the cable tray or drag chain. ## Electrical parameters and thermal limits Stator resistance is 13.9 Ω and stator inductance is 34.7 mH — these values are used by the drive's autotuning routine to calculate the current loop gains. The torque constant is 1.63 N·m/A at 120 °C copper temperature, and the back-EMF constant is 115 V/krpm at 20 °C. Maximum continuous RMS current is 6.3 A, with a 3-second peak current also rated at 6.3 A. The motor has 4 poles. Maximum radial force at the shaft is 900 N at 1000 rpm, derating to 530 N at 5000 rpm. Maximum axial force is 160 N. The hot-spot copper temperature limit is 130 °C — the drive's thermal model should be configured with this limit to prevent winding damage during overload cycles. No pin-compatible or functional alternative within the same SH3 series is documented as a direct replacement. If a second-source or alternate is needed, the sizing reference SH31001M provides the parametric baseline for a cross-search within the Schneider Electric servo motor family.","metaTitle":"Schneider Electric SH31001M01F1100 Servo Motor with Brake","metaDescription":"Schneider Electric SH31001M01F1100 servo motor with brake, 660 W continuous, 9 Nm holding torque, IP65, absolute SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"7.9 in (199.5 mm)","Inertia":"0.618 kg.cm² of brake 1.4 kg.cm² of motor","Key width":"0.2 in (6 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"625 rpm 115 V single phase 1250 rpm 230 V single phase 2500 rpm 400 V three phase 3000 rpm 480 V three phase","Rotor inertia":"2.018 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"24.8 lbf.in (2.8 N.m) 115 V single phase 23.99 lbf.in (2.71 N.m) 230 V single phase 22.30 lbf.in (2.52 N.m) 400 V three phase 22.30 lbf.in (2.52 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.63 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"660 W","Mounting Support":"International standard flange","Sizing reference":"SH31001M","Back emf constant":"115 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"85.0 lbf.in (9.6 N.m) 115...480 V three phase","Stator inductance":"34.7 mH","Stator resistance":"13.9 Ohm","Maximum current Irms":"6.3 A","Nominal output power":"210 W 115 V single phase 410 W 230 V single phase 790 W 400 V three phase 930 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Output current 3s peak":"6.3 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm 570 N 4000 rpm 530 N 5000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"1.8 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/bc44170ee7aa2b7eaa70d2eb20e0777d.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH31001M01F1100/sh3-servomotor-100mm-1-stack-high-torque-smooth-shaft-sincos-singleturn-128-brake-straight-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31001M01F1100/alternatives.json"},"ai":{"faq":[{"question":"What is the holding torque of the integrated brake on SH31001M01F1100?","answer":"The holding brake delivers 79.7 lbf·in (9 N·m). This is the static holding torque at zero speed — sufficient for vertical-axis loads up to approximately 9 N·m of gravitational torque, assuming a 1.5× safety factor per IEC 60204-1."},{"question":"What compliance documentation does Schneider Electric provide for SH31001M01F1100?","answer":"The motor carries IP65 protection per IEC 60034-5 on both the motor body and shaft bushing. Compliance with RoHS, REACH, and applicable IEC standards is standard for Schneider Electric servo motors in this series; specific declarations are available on request at RFQ time."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31001M01F1100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31001M01F1100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}