{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31001M02A1100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31001M02A1100","canonicalUrl":"https://aoctrl.com/schneider/SH31001M02A1100","factsUrl":"https://aoctrl.com/api/mcp/products/SH31001M02A1100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31001M02A1100, 2500 rpm at 400 V three-phase, 2.52 Nm nominal torque, IP65, absolute multiturn SinCos Hiperface encoder, smooth shaft, 100 mm flange.","salesMarkdown":"## Speed and torque across supply voltages The SH31001M02A1100 delivers different speed and torque depending on what supply you feed it. At 400 V three-phase, nominal speed is 2500 rpm with 2.52 Nm torque; at 480 V three-phase it reaches 3000 rpm at the same torque. On single-phase 115 V it drops to 625 rpm and 2.8 Nm, and at 230 V single-phase it runs 1250 rpm at 2.71 Nm. Continuous stall torque is 2.94 Nm across the 115–480 V three-phase range, with a peak stall torque of 9.6 Nm for short-duration moves. Continuous output power varies from 210 W on 115 V single-phase up to 930 W at 480 V three-phase. ## Encoder feedback and integration This motor carries an absolute multiturn SinCos Hiperface encoder — that's the feedback protocol you need to match with your drive. It gives position and speed data without needing a homing cycle on power-up, which saves a step during commissioning. The straight connector on the motor side mates with a standard Hiperface cable set. The 100 mm IEC flange and 19 mm smooth shaft with a 6 mm keyway are standard for this frame size. Centring collar is 95 mm diameter, 3.5 mm deep. Four 9 mm mounting holes — the bolt pattern matches the common SH3 footprint. ## Environmental sealing and cooling Rated IP65 per IEC 60034-5 on both the motor body and the shaft bushing — that means it's sealed against dust ingress and low-pressure water jets from any direction. Suitable for washdown areas in food processing or outdoor installations where the motor isn't submerged. Cooling is by natural convection, so no fan or external blower needed.","metaTitle":"Schneider Electric SH31001M02A1100 Servo Motor","metaDescription":"Schneider Electric SH31001M02A1100 SH3 servo motor, 2500 rpm at 400 V three-phase, 2.52 Nm torque, IP65, absolute multiturn Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"6.6 in (168.5 mm)","Key width":"0.2 in (6 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"625 rpm 115 V single phase 1250 rpm 230 V single phase 2500 rpm 400 V three phase 3000 rpm 480 V three phase","Rotor inertia":"1.4 kg.cm²","Nominal torque":"24.8 lbf.in (2.8 N.m) 115 V single phase 23.99 lbf.in (2.71 N.m) 230 V single phase 22.30 lbf.in (2.52 N.m) 400 V three phase 22.30 lbf.in (2.52 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.63 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"660 W","Mounting Support":"International standard flange","Sizing reference":"SH31001M","Back emf constant":"115 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"85.0 lbf.in (9.6 N.m) 115...480 V three phase","Stator inductance":"99.15 mH","Stator resistance":"13.9 Ohm","Maximum current Irms":"6.3 A","Nominal output power":"210 W 115 V single phase 410 W 230 V single phase 790 W 400 V three phase 930 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm 570 N 4000 rpm 530 N 5000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"1.8 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/eeec772123a1c5661797a4fd155ee5c1.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH31001M02A1100/sh3-servomotor-100mm-1-stack-high-torque-smooth-shaft-sincos-multiturn-128-no-brake-straight-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31001M02A1100/alternatives.json"},"ai":{"faq":[{"question":"What is the maximum mechanical speed of the SH31001M02A1100?","answer":"The maximum mechanical speed is 6000 rpm. The nominal speeds listed (625–3000 rpm) depend on supply voltage, but the rotor can spin up to 6000 rpm before mechanical limits apply."},{"question":"Does the SH31001M02A1100 include a holding brake?","answer":"No — the holding brake is listed as 'Without'. This motor has no internal brake; if your application needs a holding brake on the vertical axis or for power-off position hold, you'll need a separate brake or a different SH3 variant that includes one."},{"question":"What electrical parameters should I check for drive tuning?","answer":"Stator resistance is 13.9 Ω, stator inductance is 99.15 mH, and the torque constant is 1.63 Nm/A at 120 °C. The back EMF constant is 115 V/krpm at 20 °C. These values go into the drive's autotune routine for current loop and velocity loop gains."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31001M02A1100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31001M02A1100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}