{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31001M02A2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31001M02A2000","canonicalUrl":"https://aoctrl.com/schneider/SH31001M02A2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH31001M02A2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31001M02A2000, 660 W continuous power, 3000 rpm at 480 V three-phase, absolute multiturn SinCos Hiperface encoder, IP54/IP65, smooth shaft without brake.","salesMarkdown":"## Motor sizing and speed-torque across supply voltages The SH31001M02A2000: This SH3 frame motor delivers 660 W continuous power, but the nominal speed and torque depend on what supply you feed it. At 480 V three-phase it spins 3000 rpm with 22.30 lbf·in (2.52 N·m) nominal torque; drop to 400 V three-phase and the speed is 2500 rpm at the same torque. On single-phase 230 V you get 1250 rpm at 23.99 lbf·in (2.71 N·m), and on 115 V single-phase it's 625 rpm at 24.8 lbf·in (2.8 N·m). The peak stall torque is 85.0 lbf·in (9.6 N·m) across the 115–480 V three-phase range, and continuous stall torque sits at 26.02 lbf·in (2.94 N·m) on the same three-phase supply. ## Encoder feedback and cable connection The feedback device is an absolute multiturn SinCos Hiperface encoder — that gives you position data on power-up without a homing move, which is a real time-saver on multi-axis lines. The electrical connection uses a rotatable right-angled connector, so you can route the cable bundle in tight cabinets without stressing the gland. This variant ships without a holding brake, so if your vertical axis needs to hold position at power-off, you'll need to add an external brake or spec the braked version. The shaft is smooth (no keyway), 19 mm diameter by 40 mm long, with a 6 mm key width — confirm your coupling or pulley fits that interface. ## Mounting flange and environmental protection The motor flange is 100 mm (3.9 in) with an international standard pattern, a 95 mm centring collar, and 9.0 mm mounting holes — it bolts directly to common gearbox and actuator flanges. Overall length is 168.5 mm (6.6 in). Protection rating is IP54 at the shaft bushing without the shaft seal ring, or IP65 on the motor body and with the shaft bushing seal fitted, per IEC 60034-5. If the motor sees washdown or coolant spray, make sure the shaft seal ring is installed. Cooling is natural convection — no fan, so keep ambient airflow in mind if the duty cycle is high. Maximum radial force at the shaft nose is 900 N at 1000 rpm, dropping to 530 N at 5000 rpm — this sets the belt-tension or overhung-load limit. Maximum axial force is 160 N.","metaTitle":"Schneider Electric SH31001M02A2000 Servo Motor, 660 W","metaDescription":"Schneider Electric SH31001M02A2000 SH3 servo motor, 660 W continuous power, 3000 rpm at 480 V three-phase. Absolute multiturn Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"6.6 in (168.5 mm)","Key width":"0.2 in (6 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"625 rpm 115 V single phase 1250 rpm 230 V single phase 2500 rpm 400 V three phase 3000 rpm 480 V three phase","Rotor inertia":"1.4 kg.cm²","Nominal torque":"24.8 lbf.in (2.8 N.m) 115 V single phase 23.99 lbf.in (2.71 N.m) 230 V single phase 22.30 lbf.in (2.52 N.m) 400 V three phase 22.30 lbf.in (2.52 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.63 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"660 W","Mounting Support":"International standard flange","Sizing reference":"SH31001M","Back emf constant":"115 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"85.0 lbf.in (9.6 N.m) 115...480 V three phase","Stator inductance":"99.15 mH","Stator resistance":"13.9 Ohm","Maximum current Irms":"6.3 A","Nominal output power":"210 W 115 V single phase 410 W 230 V single phase 790 W 400 V three phase 930 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm 570 N 4000 rpm 530 N 5000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"1.8 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/4a49bf6cf1e1475f876df2f03d9c7188.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH31001M02A2000/sh3-servomotor-100mm-1-stack-high-torque-smooth-shaft-sincos-multiturn-128-no-brake-angular-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31001M02A2000/alternatives.json"},"ai":{"faq":[{"question":"What encoder type does SH31001M02A2000 use?","answer":"It uses an absolute multiturn SinCos Hiperface encoder. This provides position feedback on power-up without requiring a homing sequence, which simplifies commissioning on multi-axis systems."},{"question":"What is the continuous power and speed of this servo motor?","answer":"Continuous power is 660 W. At 480 V three-phase the nominal speed is 3000 rpm with 22.30 lbf·in (2.52 N·m) torque. Speed and torque vary with supply voltage — see the spec table for single-phase and 400 V three-phase values."},{"question":"Does this motor include a holding brake?","answer":"No, this variant ships without a holding brake. If your application requires a brake for vertical-axis holding, select the braked version of the SH3 frame."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31001M02A2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31001M02A2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}