{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31001M02F1100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31001M02F1100","canonicalUrl":"https://aoctrl.com/schneider/SH31001M02F1100","factsUrl":"https://aoctrl.com/api/mcp/products/SH31001M02F1100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31001M02F1100, 660 W continuous power, 2.8 Nm nominal torque, 9 Nm holding brake, IP65, absolute multiturn SinCos Hiperface encoder, smooth shaft, 100 mm flange.","salesMarkdown":"## Active production — what that means for your BOM The SH31001M02F1100: No minimum-buy premium or lot-specific risk — just a standard production part. ## Torque and speed across supply voltages This is a three-phase servo motor, but its performance scales with the supply: at 400 V three-phase it delivers 2500 rpm nominal speed and 2.52 Nm nominal torque; at 480 V three-phase it reaches 3000 rpm at the same torque. On single-phase 230 V it runs 1250 rpm at 2.71 Nm, and on 115 V single-phase it drops to 625 rpm at 2.8 Nm. The continuous power rating is 660 W, with nominal output power reaching 930 W at 480 V three-phase. Peak stall torque is 9.6 Nm across the 115...480 V three-phase range, and continuous stall torque is 2.94 Nm. The torque constant is 1.63 Nm/A at 120 °C copper temperature — use that for drive current sizing at thermal steady state. ## Encoder, feedback, and integration fit The encoder is an absolute multiturn SinCos Hiperface type — single-cable feedback that carries both position and commutation data over a standard Hiperface interface. No battery backup needed for multiturn counts; the drive reads absolute position on power-up. The back-EMF constant is 115 V/krpm at 20 °C, which sets the voltage-speed ceiling for the drive bus. Electrical connection is via a straight connector — no right-angle or rotatable option here, so plan the cable exit direction at the motor mount. The motor carries IP65 protection on both the body and the shaft bushing per IEC 60034-5, meaning it handles washdown and dust ingress in food, packaging, or machining environments. Cooling is natural convection — no fan or forced air required. That simplifies installation in tight cabinets but means the 660 W continuous rating assumes free airflow around the motor body; derate if mounted in a confined pocket or against other heat sources. ## Mounting dimensions and shaft interface The motor flange size is 100 mm (3.9 in) with an international standard flange pattern — four mounting holes at 9 mm diameter on a centring collar of 95 mm diameter and 3.5 mm depth. Overall length is 199.5 mm (7.9 in). The shaft is 19 mm diameter, 40 mm long, smooth (no keyway), with a 6 mm key width if you add a key. Smooth shaft means you use a clamping-type coupling or a keyless locking assembly — no keyseat to align, but the coupling must transmit torque through friction or a taper lock. Maximum radial force at the shaft end is 900 N at 1000 rpm, dropping to 530 N at 5000 rpm. Maximum axial force is 160 N. Stay within these limits to avoid bearing overload — especially on belt-drive or direct-coupling applications where radial load is highest.","metaTitle":"Schneider Electric SH31001M02F1100 Servo Motor with Brake","metaDescription":"Schneider Electric SH31001M02F1100 SH3 servo motor with brake, 660 W continuous power, IP65, absolute multiturn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"7.9 in (199.5 mm)","Inertia":"0.618 kg.cm² of brake 1.4 kg.cm² of motor","Key width":"0.2 in (6 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"625 rpm 115 V single phase 1250 rpm 230 V single phase 2500 rpm 400 V three phase 3000 rpm 480 V three phase","Rotor inertia":"2.018 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"24.8 lbf.in (2.8 N.m) 115 V single phase 23.99 lbf.in (2.71 N.m) 230 V single phase 22.30 lbf.in (2.52 N.m) 400 V three phase 22.30 lbf.in (2.52 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.63 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"660 W","Mounting Support":"International standard flange","Sizing reference":"SH31001M","Back emf constant":"115 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"85.0 lbf.in (9.6 N.m) 115...480 V three phase","Stator inductance":"34.7 mH","Stator resistance":"13.9 Ohm","Maximum current Irms":"6.3 A","Nominal output power":"210 W 115 V single phase 410 W 230 V single phase 790 W 400 V three phase 930 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Output current 3s peak":"6.3 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm 570 N 4000 rpm 530 N 5000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"1.8 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/383fd6bc3b5d194f446cfaeb8648d18e.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH31001M02F1100/sh3-servomotor-100mm-1-stack-high-torque-smooth-shaft-sincos-multiturn-128-brake-straight-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31001M02F1100/alternatives.json"},"ai":{"faq":[{"question":"What is the closest alternative to SH31001M02F1100 in the SH3 family?","answer":"The sizing reference is SH31001M, which covers the 100 mm flange frame size. Within that frame, variants differ by encoder type (SinCos Hiperface vs resolver vs EnDat), shaft configuration (smooth vs keyed), and whether the holding brake is included. This specific variant carries the absolute multiturn SinCos Hiperface encoder, smooth shaft, and brake — any substitution would require checking the drive compatibility and mechanical interface."},{"question":"What compliance documentation does Schneider Electric provide for SH31001M02F1100?","answer":"The motor is IP65 rated per IEC 60034-5. Standard Schneider Electric documentation includes the CE declaration of conformity and the product data sheet. RoHS and REACH compliance are standard for current-production SH3 series motors, though specific certificates should be confirmed at order."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31001M02F1100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31001M02F1100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}