{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31001M02F1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31001M02F1200","canonicalUrl":"https://aoctrl.com/schneider/SH31001M02F1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31001M02F1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31001M02F1200, three-phase, 2.8 Nm nominal torque, 9 Nm holding brake, IP65, absolute multiturn SinCos Hiperface encoder, 100 mm flange.","salesMarkdown":"## Motor ratings that govern the axis sizing The SH31001M02F1200 delivers 2.8 Nm nominal torque on a 115 V single-phase supply, dropping to 2.52 Nm at 400 V three-phase — the torque curve is supply-dependent, so the drive's input voltage dictates the continuous load envelope. Nominal speed shifts with the supply: 625 rpm at 115 V single-phase, 1250 rpm at 230 V single-phase, 2500 rpm at 400 V three-phase, and 3000 rpm at 480 V three-phase. The motor is wound for 4 poles, so the speed range follows the line frequency directly. Continuous power output is 210 W on 115 V single-phase, 410 W on 230 V single-phase, 790 W on 400 V three-phase, and 930 W on 480 V three-phase. The 660 W continuous power figure corresponds to the three-phase 400 V rating — the motor's thermal limit under natural convection cooling. ## Brake and encoder — what the holding torque and feedback mean for a vertical axis The integrated holding brake delivers 9 Nm (79.7 lbf.in) static holding torque — sufficient to hold a vertical load at standstill without the drive holding current. The brake is spring-applied, power-released; loss of power engages the brake automatically. Feedback comes from an absolute multiturn SinCos Hiperface encoder — no homing routine needed after a power cycle. The multiturn count tracks absolute position over multiple shaft revolutions, which matters for applications where the load position must be known immediately on restart. ## IP rating and mechanical fit — where this motor runs IP65 on the motor body and shaft bushing, IP67 on the housing — the motor withstands washdown environments. The shaft bushing seal is the wet-end barrier; the housing seal handles hose-directed water per IEC 60034-5. Flange size is 100 mm (3.9 in) with a 95 mm centring collar and 3.5 mm centring collar depth. Four mounting holes at 9.0 mm diameter on the standard international flange pattern — direct bolt-on to common gearbox and machine frames. Shaft is 19 mm diameter, smooth (no keyway), 40 mm length. The smooth shaft means the load coupling must use a clamping or friction-fit method — no key to transmit torque. Key width is listed at 6 mm, but the shaft end is smooth, so the keyway is absent on this variant. ## Sourcing and lifecycle — active, quoted to order Sourced through independent distribution against an RFQ.","metaTitle":"Schneider Electric SH31001M02F1200 Servo Motor with Brake","metaDescription":"Schneider Electric SH31001M02F1200 servo motor with brake, 2.8 Nm nominal torque, IP65, absolute multiturn encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"7.9 in (199.5 mm)","Inertia":"0.618 kg.cm² of brake 1.4 kg.cm² of motor","Key width":"0.2 in (6 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"625 rpm 115 V single phase 1250 rpm 230 V single phase 2500 rpm 400 V three phase 3000 rpm 480 V three phase","Rotor inertia":"2.018 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"24.8 lbf.in (2.8 N.m) 115 V single phase 23.99 lbf.in (2.71 N.m) 230 V single phase 22.30 lbf.in (2.52 N.m) 400 V three phase 22.30 lbf.in (2.52 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.63 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"660 W","Mounting Support":"International standard flange","Sizing reference":"SH31001M","Back emf constant":"115 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"85.0 lbf.in (9.6 N.m) 115...480 V three phase","Stator inductance":"34.7 mH","Stator resistance":"13.9 Ohm","Maximum current Irms":"6.3 A","Nominal output power":"210 W 115 V single phase 410 W 230 V single phase 790 W 400 V three phase 930 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Output current 3s peak":"6.3 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm 570 N 4000 rpm 530 N 5000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"1.8 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/f03693e42b62073c7f6c908f46c97b80.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH31001M02F1200/sh3-servomotor-100mm-1-stack-high-torque-smooth-shaft-sincos-multiturn-128-brake-straight-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31001M02F1200/alternatives.json"},"ai":{"faq":[{"question":"What is the closest pin-compatible alternative to SH31001M02F1200 in this Servo Motors with Brake family?","answer":"The SH31001M02F1200 is a specific variant within the SH3 series with a smooth shaft and absolute multiturn encoder — any substitution would require checking the flange size, shaft dimensions, encoder type, and brake torque against the application."},{"question":"What is SH31001M02F1200's listed phase on this Servo Motors with Brake line?","answer":"The motor is listed as three-phase. Nominal speed and torque vary depending on whether the supply is single-phase or three-phase — the ratings table shows performance at 115 V single-phase, 230 V single-phase, 400 V three-phase, and 480 V three-phase."},{"question":"What is SH31001M02F1200's listed length on this Servo Motors with Brake line?","answer":"The overall length is 7.9 inches (199.5 mm). This dimension includes the motor body and the connector — the rotatable right-angled connector adds to the footprint, so the clearance envelope should account for the connector orientation."},{"question":"What compliance documentation does Schneider Electric provide for SH31001M02F1200?","answer":"The motor carries IP65/IP67 ratings conforming to IEC 60034-5."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31001M02F1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31001M02F1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}